TomcatMJ am 16. August 2006 um 08:44 Uhr

2006-08-16T08:44:54Z

Neue Seite

Standardkonfiguration für den [[gnump3d]] Streamingserver:
<code>

###
# $Id: gnump3d.conf,v 1.11 2004/04/15 18:20:54 skx Exp $
###
#
# This is the config file for GNUMP3d, the streaming MP3/OGG server.
#
# All lines beginning with '#' are comments and may be ignored.
#
###
#
# Values may span multiple lines if they are terminated with a
# '\' character.
#
# The '\' MUST be the last character upon the line, the following examples
# show valid, correct, entries:
#
# user = nobody # Some comment
#
# # The port to listen upon.
# port=3333
#
# directory_format = some \
# really \
# really \
# long string
#
#
###
#
# If you believe the documentation here is incomplete or misleading
# please consider contributing an update - or reporting it as a bug.
#
# Comments on sensible defaults to ship this file with, or new options
# should be sent to the author.
#
###
#
# Steve
# ---
# http://www.gnump3d.org/ - Website for this software, including
# discussion forums and mailing lists.
#
# http://www.steve.org.uk - My homepage. Visit. Enjoy.
#
####

###
# Basic Server Settings
####

#
# The port upon which we are going to serve. This may be any
# port which is not already in use upon your machine.
#
# You may use a low port, for example 80, if you are running
# as root - but that is only recommended if you make use of
# the `user' option, which occurs later in this file.
#
port = 8888

#
# The following is the interface address that we wish to
# bind upon.
#
# You'll only need set this if you are running this server upon
# a machine which has multiple IP addresses and you wish to force
# it to bind to a particular address.
#
# If you're not running this server on a machine with multiple
# IP addresses, then please ignore this setting.
#
#
# NOTE
######
#
# If you just want to specify the name used in all the generated
# links then you should be setting `hostname' instead.
#
# binding_host = 192.168.2.2
#

#
# Set the hostname that is used in all the generated links.
#
# (This defaults to the name of the server machine, with no
# domain suffix).
#
# You won't need this unless the machine which is serving on
# MUST be accessed via its fully qualified domain name - for
# example if you're running it on a machine which is accessible
# to the world.
#
# NOTE
######
#
# See `binding_host' if you have a machine which has multiple
# IP addresses and you're trying to bind to one in particular.
#
hostname = stream.meinedomain.homelinux.net
#

#
# The root directory where we serve content from, this should be
# the directory containing the MP3, OGG, or other media files that
# you wish to share.
#
# Obviously the files which you wish to serve should be accessible
# to the user who this server is running as - which is set via the
# 'user' setting below.
#
# If you're on a multi-user system its probably a good idea to
# make the audio files readable to other users anyway, share the
# musical goodness!
#
root = /srv/mp3

#
# This is the file which logs all MP3's / OGG's / directories
# which clients access.
#
# If you start the server as root it's recommended that you use
# a canonical location such as '/var/log' or '/var/adm', (because
# your system will, probably, rotate files held there).
#
# If you're starting this server as a non-root user you should
# change these locations to be a directory upon which you have write
# permissions.
#
####
#
# IMPORTANT NOTE:
#
# If you want the song statistics to be displayed correctly
# you MUST give the logfile as an absolute path - you must also
# ensure that the logfile is readable to the user whom you are
# running the server as.
#
####
#
# NOTE:
#
# This logfile is 100% apache logfile compatible so you may run any
# Apache logfile processor upon it if you so wish.
#
# Simplistic statistics such as the most popular directories, songs,
# and clients are available via the installed script 'gnump3d-top'
# Run 'gnump3d-top --help' for details.
#
#
####
#
logfile = /var/log/gnump3d/access.log

#
# Specify the format of the logfile, this may use any valid variables
# which are defined in package "main".
#
#
log_format = $connected_address - $user [$date] "GET $REQUEST" $HTTP_CODE $SERVED_SIZE "-" "$USER_AGENT"

#
# In the case of problems all output from the server will be sent
# to an error log.
#
# This next option configures where that is
#
errorlog = /var/log/gnump3d/error.log

#
# This option allows you to specify additional arguments to the
# statistics generating program 'gnump3d-top', and it's complete
# path if you don't have it installed upon the $PATH of the user
# who starts the server:
#
# stats_program = /usr/bin/gnump3d-top
#
#
# For example you may change the default number of lines which are
# reported from the default of 20 to 10 with this:
#
# stats_arguments = --count=10
#
# To hide the directories which are handled by the various plugins
# you may use the '--hide' option.
#
# stats_arguments = --hide
#
# To read multiple logfiles, (eg to cope with files which have been
# processed by logrotate), you could use:
#
# stats_arguments = --logfiles = /var/log/gnump3d/access.log*
#
# Combine the options if you wish, and see the gnump3d-top man-page
# for details of more arguments
#
# stats_arguments = --count=40 --hide --logfiles=/var/log/gnump3d/access.log*
#

##
# SECURITY OPTIONS.
####

#
# If there is a user value setup below then the server will become that
# user, after creating the listening socket and after opening the logfiles
# for writing.
#
# If you want to run this server via init.d, (which has the effect of
# starting the daemon as root), you should make sure you have this set
# to an appropriate value.
# Otherwise you will have the server running as root, which is clearly
# not a good idea - even in the unlikely event that this application is
# 100% bug free.
#
# You may comment the line out if you are running the daemon from your home
# directory, and you are the only user with read access to the server root.
# Although this is not recommended way of running the server.
#
# For the benefit of fellow computer users is recommended that you run the
# server as a user such as 'nobody', and allow people read-only access to
# your audio files.
#
user = gnump3d

##
# AUTHORISATION OPTIONS.
####

#
# The following section allows you to specify which clients
# are allowed to connect to your server.
#
# If you are leaving this server out on an Internet-accessible
# machine then you will probably want to setup something here,
# or at least make use of the password protection system.
#
# The following entries are commented out, so they have no effect,
# but they should serve as good examples of the things which
# are possible.
#
#
# NOTE
# ----
#
# Multiple settings are allowed - just separated them with ';'
#
#
# Only people on the same subnet, (class C):
# allowed_clients = 192.168.2.0/8
#
# People on the same class B:
# allowed_clients = 10.0.0.0/16
#
# Only one person:
# allowed_clients = 192.168.2.12
#
# Everybody
# allowed_clients = all
#
# Nobody (!)
# allowed_clients = none
#
# Everybody local, and one remote address:
# allowed_clients = 192.168.2.0/8; 194.247.82.33
#
# Everybody local, and one remote range:
# allowed_clients = 192.168.2.0/8; 194.237.82.0/8
#
#
allowed_clients = all

#
# 'denied_clients' is the counterpart to allowed_clients - here
# you can specify particular clients who are unable to browse your
# music archive.
#
# Usage is identical to the allowed clients above; eg:
#
# denied_clients = 192.168.2.12; 192.168.2.25; 192.168.6.0/8
#
# denied_clients = none
#

##
#
# This section controls whether we will prompt clients for
# a username and password prior to granting access to the
# server.
#
# This is enabled by default; all you need to do is create
# a password file in the MP3 directory called '.password'.
#
# (To disable this uncomment the 'enable_password_protection' line).
#
# The password file should be of the following format:
#
# username:password
# username2:password2
# ...:....
# usernameN:passwordN
#
#
# NOTE
# ----
#
# The password file must be readable to the user the server is running
# as.
#
###
# enable_password_protection = 0
###

##
#
# Referrer check
#
##
#
# The last security option is the ability to block clients that don't
# contain a specific 'Referrer:' header.
#
# Note that referrer protection isn't terribly reliable, as many clients
# will not send a referrer header when making a connection. This is
# especially likely when clients are connecting via a 'privacy enhancing'
# proxy server; such as Internet Junkbuster, etc.
#
# Similarly malicious clients may deliberately stop sending referrers
# if they realise what is going on.
#
#
#
###
# If you wish to only allow a particular referring URL then specify it
# here.
# valid_referrers = http://somesite.com/

##
# SERVER FEATURES.
####

#
# This next option controls what happens when you click upon a
# single MP3 file.
#
# If always_stream is set to '1', and you click upon it you'll
# actually get a .m3u (playlist) file containing a link to it -
# the advantage of doing this is that you don't have to download
# the file in its entirety to listen to it - it should start playing
# immediately.
#
# If set to '0' the playlists will work via streaming, but selecting
# an individual MP3 file will cause it to be downloaded to your local
# machine prior to playing - one drawback of this is that playback
# will probably not start until the entire file has downloaded.
#
always_stream = 1

#
# There is a link placed at the top of every directory, which allows you
# to play the songs within that directory recursively.
#
# By default the recursive option plays all the tracks in a
# sorted order - by uncommenting the following option you can
# have the recursive playlists default to being in a random order.
#
recursive_randomize = 1
#

#
# This next setting controls the format of the playslist files.
#
# There are two formats this server supports, simple playlists which
# are just plain listings of tracks, and advanced playlists which contain
# copies of the song tags in comments.
#
# The advanced playlists will allow you to view song tag information
# inside the playlist windows of both XMMS and WinAMP
#
#
advanced_playlists = 1
#

##
# Server Appearance Settings.
####

##
#
# All the output the server produces is generated with the help of
# some HTML template files, these are referred to throughout the
# program and each collection of templates is referred to collectively
# as a 'theme'.
#
# This next option allows you to specify which theme should be used
# by default. (Any client can select one of the available themes by
# the use of cookies).
#
# For each theme there are a collection of HTML files which are read
# and used for the server output. There are several basic files which
# must be supplied to be considered a theme:
#
# index.html -> Used for displaying individual directories.
# search.html -> Used for displaying the search form.
# results.html -> Used for displaying the results of a search.
# stats.html -> Used for customising the server statistics page.
#
# In addition to those each plugin reads in it's own template file
# and uses that. For example the statistics plugin is accessed via
# the URL http://server.host.name:port/stats/, and reads in a template
# called 'stats.html'
#
# The theme directory defaults to /usr/share/gnump3d - but may be
# changed via the 'theme_directory' setting given below.
#
# When the server is running you may set the theme from your browser
# via the preferences page, simply visit the link:
#
# http://server.host.name:port/prefs
#
#
# NOTE
# ----
#
# If you create a theme I'd be happy to include it in future releases
# if you wish - see the online theme creation docs at:
#
# http://gnump3d.sourceforge.net/theme.html
#
theme = Tabular

##
#
# Set the base theme directory if you wish to place them in a non-standard
# location.
#
##
theme_directory = /usr/share/gnump3d/
##

##
#
# This next option controls how directories are displayed on the index
# pages.
#
# There are several defined variables which you can choose to use:
#
# $LINK = The actual URL of the directory.
#
# $DIR_NAME = The name of the directory.
#
# $SONG_COUNT = The number of songs contained in the directory.
#
# $DIR_COUNT = The number of subdirectories in the directory.
#
# $RECURSE = A link to play the contents of the directory recursively.
#
# NOTE: you can also specify "directory_format2" as an alternative display
# format. Directories are then listed with alternating display formats.
# This is useful if you want to have alternating background colors for
# each entry in a table, for example.
#
directory_format = <tr><td width="10%"> </td><td><a href="$LINK">$DIR_NAME</a></td><td>$SONG_COUNT</td><td>$DIR_COUNT</td><td>[$RECURSE]</td></tr>

#
# directory_format = <tr><td><a href="$LINK">$DIR_NAME</a></td></tr>
#
# directory_format = <tr><td><a href="$LINK">$DIR_NAME</a></td></tr>
#
# directory_format = <tr><td><a href="$LINK">$DIR_NAME</a></td><td>[$RECURSE]</td></tr>
#

##
# File format
##
#
# This option is analogous to the 'directory_format' option above.
#
# It specifies how the files should be listed.
#
# $LINK Is the link to the track itself
#
# $SONG_FORMAT Is a template string which is described below.
#
# NOTE: you can also specify "file_format2" as an alternative display
# format. Files are then listed with alternating display formats.
# This is useful if you want to have alternating background colors for
# each entry in a table, for example.
#
file_format = <tr><td width="10%"> </td><td><a href="$LINK">$SONG_FORMAT</a></td><td align="right">[<a href="/info/$PLAINLINK">Info</a>] [<a href="$PLAINLINK">Download</a>]</td></tr>

##
#
# This next setting, `song_format', allows you to configure how the
# MP3 and OGG Vorbis files are displayed.
#
# If the file which has been found contains any tag information then
# the following values will be available to you:
#
# $ARTIST -> The artist of the song.
#
# $ALBUM -> The album the song came from.
#
# $COMMENT -> The comment string attached to the song, if any.
# NOT AVAILABLE FOR OGG FILES.
#
# $SONGNAME -> The name of the song.
#
# $YEAR -> The year the song was recorded.
# NOT AVAILABLE FOR OGG FILES.
#
# $GENRE -> The genre of the track.
# NOT AVAILABLE FOR OGG FILES.
#
# $BPS -> The sample rate of the song - if non-variable.
# NOT AVAILABLE FOR OGG FILES.
#
# $LENGTH -> The length of the track in MM:SS
# NOT AVAILABLE FOR OGG FILES, OR VBR MP3's.
#
# $SECONDS -> The length of the track in seconds
# NOT AVAILABLE FOR OGG FILES, OR VBR MP3's.
#
# $SIZE -> The size of the audio stream.
# NOT AVAILABLE FOR OGG FILES, OR VBR MP3's.
#
# $TRACK -> The number of the track
#
# $FILENAME will always be available. (This is the name of the file
# without any suffix or directory information).
#
song_format = $TRACK - $ARTIST - $ALBUM - $SONGNAME [ $GENRE - $LENGTH / $SIZE ]

##
#
# If you wish to change the text displayed on the 'Play'
# link you should uncomment the following option, and change the
# text appropriately.
#
##
#
# play_recursively_text = Play
##

##
#
# This next option controls how songs are sorted prior to display,
# and used in the playlists.
#
# You may use any of the $ values which are listed above in
# the 'song_format' setting, eg:
#
# Sort by the song name.
# sort_order = $SONGNAME
#
# Sort by artist if present.
# sort_order = $ARTIST
##
# Default to sorting by the track number, due to popular.
sort_order = $TRACK

##
# DOWNSAMPLING / BIT RATE CHANGE
##
#
# This support allows the music to be down-sampled before it is streamed
# to clients. This will slow down the serving, and may be a little
# processor intensive - I guess it will depend upon the speed of your
# server, and the number of users you have.
#
##
#
# Is downsampling support enabled?
#
# If this is disabled then none of the further downsampling options will
# apply, even if they are set.
#
# Also note that if the downsampling support is disabled the preferences
# page will not allow the clients to select their own bitrate.
#
# (I think this makes sense, if it's disabled it's misleading to present
# configuration options to the clients).
#
# downsample_enabled = 1
#

##
#
# YOU MUST UNCOMMENT THESE LINES
#
# Downsampling is based upon IP address, rather than enabled globally
# this allows you to control things a little more tightly than user
# preferences.
#
# For example on a gateway machine you'd want all people on the internal
# LAN to have full quality files, and people remote to have the lower
# quality sounds.
#
# The next two settings specify the downsampling ranges:
#
downsample_clients = ALL
no_downsample_clients = 192.168.0.0/24
#
# NOTE: 'no_downsample_clients' takes precedence over 'downsample_clients'.
#
# Here are some examples, notice that you can use either single IP
# addresses, ranges, 'NONE' or 'ALL'
#
#
# Downsample Everybody:
# downsample_clients = ALL
# no_downsample_clients = NONE
#
# Downsample remote, allow local to have full quality
# downsample_clients = ALL
# no_downsample_clients = 192.168.0.0/24
#
# Downsample all except two addresses
# downsample_clients = ALL
# no_downsample_clients = 192.168.0.162; 192.168.0.33
#
# Full quality for all local, except one address
# downsample_clients = 192.168.0.99
# no_downsample_clients = 192.168.0.0/24
#
##

##
#
# YOU MUST UNCOMMENT THESE LINES
#
#
# For each of the downsampling levels the user has chosen the selected
# file will be processed by a command.
#
# This command is assumed to write it's output directly to STDOUT.
#
# The following options specify the command line to run, note that
# the string '$FILENAME' will be replaced by the file the user is
# requesting.
#
# Note:
#
# If you wish to downsample or convert any other file types you
# need to add entries to this file to specify what is done to them
# simply create an entry which looks like:
#
# downsample_"level"_"file suffix" = command args
#
downsample_high_mp3 = /usr/bin/lame --mp3input -b 56 $FILENAME -
downsample_medium_mp3 = /usr/bin/lame --mp3input -b 32 $FILENAME -
downsample_low_mp3 = /usr/bin/lame --mp3input -b 16 $FILENAME -
#
downsample_high_ogg = sox -t ogg $FILENAME -t raw - | oggenc --raw --downmix -b 96 -
downsample_medium_ogg = sox -t ogg $FILENAME -t raw - | oggenc --raw --downmix -b 64 -
downsample_low_ogg = sox -t ogg $FILENAME -t raw - | oggenc --raw --downmix --resample 22050 -b 32 -
#

#
# If you always want to force a particular bitrate upon clients who've
# not chosen something different then specify it here:
#
# default_quality = medium

#
#
##

####
# Plugin control
##

#
# Several of the servers features are controlled via external plugins,
# these are simple Perl scripts which are called by the server in response
# to requests.
#
# This next setting allows you to change the location from which the
# plugins are loaded.
#
# plugin_directory = /usr/lib/perl5/gnump3d/plugins
#
#
# NOTE: the following directory should be correctly filled in by
# the installation script - if this doesn't happen report this as
# a bug.
#
plugin_directory = /usr/lib/perl5/5.8.8/gnump3d/plugins
#

#
# By default all the plugins which are shipped with this server are
# enabled, (there's no configuration to be done so this isn't really
# a problem), however if you wish you may selectively disable them here.
#
# Note
# ----
# If you switch off a plugin you may find certain links in the default
# theme collections don't work.
#
# For each plugin there is a switch 'plugin_foo' which will stop
# the plugin named 'foo.pm' from being loaded.
#
# Simply uncomment the relevant option to disable that plugin
#

# The bug reporting plugin
# plugin_bug = disabled

# The 'most recent tracks' plugin
# plugin_last = disabled

# The 'custom playlist generation' plugin
# plugin_playlist = disabled

# The search plugin
# plugin_search = disabled

# The statistics plugin
# plugin_stats = disabled

# The theme browsing plugin
# plugin_theme = disabled

# The 'currently playing' plugin
# plugin_now = disabled

#
##
# End Plugin Control
####

##
# HACKING - atypical configuration follows, this will not be of
# interest to casual users.
#
# Dragons lie yonder ... ->
#
#####

#
# When files are served there needs to be an appropriate mime type
# sent along with them, this allows the browser to pass the response
# back to an MP3 player, etc.
#
# Most Unix systems will have the file '/etc/mime.types' which is
# used by default. If not point this next file to wherever your mime
# types file is located:
#
mime_file = /etc/gnump3d/mime.types
#
#

#
# In order to record which songs are currently being played the server
# will create a temporary file containing that path of each file that
# it is serving.
#
# The path under which these files are created in may be set here.
#
now_playing_path = /var/cache/gnump3d/serving

#
# As a speedup and optimisation song tag is read via a companion script
# which is called 'gnump3d-index'. This will be run automatically when
# the server starts if possible.
#
# This next setting controls where that script will write its tag database
# to.
#
tag_cache = /var/cache/gnump3d/song.tags

#
# This next setting allows you to control the path to the gnump3d-index
# script which is used, as explained above.
#
# Normally you shouldn't need to touch this.
#
# index_program = /usr/bin/gnump3d-index

#
# This setting controls whether we should stream song title
# information in shoutcast format.
#
# If your client supports it then you should enable it, otherwise
# not.
#
# (This works correctly on WinAmp, and XMMS.)
#
shoutcast_streaming = 1

#
# By default the server logfile is appended to when we start.
#
# If you set the following value to '1' the logfile will be truncated
# instead.
#
# You might want to truncate the file to save space, but doing this
# renders the server statistics less useful.
#
# truncate_log_file = 0

#
# By default the server will close a connection it receives if it
# hasn't received a valid request after 10 seconds.
#
# Here you may change this timeout value.
#
# read_time = 10

#
# This next section controls whether we present a HTML interface
# to the server.
#
# In most situations you will want to do this - but some people have
# approached me and suggested that it should be tweakable, so here's
# the option to disable the browsing of the music
#
# If you set this to '0' the best you can probably do is call
# 'http://server:port/recurse.m3u' - or similar.
#
# enable_browsing = 1

#
# This next value controls whether we should believe, and use, the
# client supplied 'Host:' header.
#
# This header is sent by HTTP/1.1 clients only, and could be spoofed.
# You'll only NEED to use it if tunnelling over SSH or performing similar
# magic.
#
# It's enabled here because I don't believe it should cause any real harm
# YMMV.
#
use_client_host = 1

##
#
# This is an experimental feature - ignore it.
#
# It does not work.
#
# Ignore it: You are not expected to understand this (I've always wanted
# to leave that as a comment somewhere ;)
#
##
#
# jukebox_mode = 1
# jukebox_player = /usr/bin/mpg123 $FILENAME
#
##

###
# Make it possible to hide song tags, and just display filenames.
#
##
# hide_song_tags = 0

##
#
# Make it possible to disable the tag cache altogether, to save memory.
#
##
# disable_tag_cache = 0

##
# End Of Hacking Section
####

##
# End of gnump3d.conf
####
</code>

← Nächstältere Version		Version vom 31. August 2006, 11:48 Uhr
Zeile 1:		Zeile 1:
		+	[[Category:Musterkonfigurationen]]
		+
	Standardkonfiguration für den [[gnump3d]] Streamingserver:		Standardkonfiguration für den [[gnump3d]] Streamingserver:
	<code>		<code>

Gnump3d Musterkonfigurationen - Versionsgeschichte

TomcatMJ: Kategorie hinzugefügt

TomcatMJ am 16. August 2006 um 08:47 Uhr

TomcatMJ am 16. August 2006 um 08:44 Uhr

@@ Zeile 107: / Zeile 107: @@
   hostname = stream.meinedomain.homelinux.net
+  #
+  #
   #  The root directory where we serve content from, this should be
@@ Zeile 625: / Zeile 623: @@
+  #
   # downsample_enabled = 1
-−
+  #
   ##
+  #
@@ Zeile 667: / Zeile 664: @@
+  #
   ##
-−
   ##
+  #