Grafikkarten und Monitore Fedora Core: Unterschied zwischen den Versionen
K (→NVIDIA) |
(→Fedora Core 6) |
||
Zeile 5: | Zeile 5: | ||
===Fedora Core 5=== | ===Fedora Core 5=== | ||
===Fedora Core 6=== | ===Fedora Core 6=== | ||
+ | |||
+ | Root werden: | ||
+ | <nowiki>su -</nowiki> | ||
+ | |||
+ | Treiber von [[Livna|Livna.org]] installieren: | ||
+ | <nowiki>yum install kmod-fglrx</nowiki> | ||
+ | |||
+ | X-Server beenden: | ||
+ | <nowiki>init 3</nowiki> | ||
+ | |||
+ | Als Root anmelden und dann den Treiber aktivieren: | ||
+ | <nowiki>ati-fglrx-config-display enable</nowiki> | ||
+ | |||
+ | Treiber konfigurieren (Singlehead): | ||
+ | <nowiki>aticonfig --initial</nowiki> | ||
+ | |||
+ | X-Server starten: | ||
+ | <nowiki>init 5</nowiki> | ||
+ | |||
+ | /etc/xorg.conf editieren: | ||
+ | * Section "Modules", "DRI" und "Extensions" ergänzen (am Besten dazu mit der Musterkonfiguration vergleichen) | ||
+ | |||
+ | <nowiki> | ||
+ | # Modified xorg.conf -- 2006-12-02 | ||
+ | |||
+ | Section "ServerLayout" | ||
+ | Identifier "single head configuration" | ||
+ | Screen 0 "aticonfig-Screen[0]" 0 0 | ||
+ | InputDevice "Keyboard0" "CoreKeyboard" | ||
+ | EndSection | ||
+ | |||
+ | Section "Files" | ||
+ | EndSection | ||
+ | |||
+ | Section "Module" | ||
+ | Load "glx" | ||
+ | Load "freetype" | ||
+ | Load "dri" | ||
+ | EndSection | ||
+ | |||
+ | Section "InputDevice" | ||
+ | Identifier "Keyboard0" | ||
+ | Driver "kbd" | ||
+ | Option "XkbModel" "pc105" | ||
+ | Option "XkbLayout" "de" | ||
+ | EndSection | ||
+ | |||
+ | Section "Monitor" | ||
+ | Identifier "Monitor0" | ||
+ | ModelName "Samsung SyncMaster 959NF" | ||
+ | HorizSync 31.5 - 110.0 | ||
+ | VertRefresh 50.0 - 160.0 | ||
+ | Option "dpms" | ||
+ | EndSection | ||
+ | |||
+ | Section "Monitor" | ||
+ | Identifier "aticonfig-Monitor[0]" | ||
+ | Option "VendorName" "ATI Proprietary Driver" | ||
+ | Option "ModelName" "Generic Autodetecting Monitor" | ||
+ | Option "DPMS" "true" | ||
+ | EndSection | ||
+ | |||
+ | Section "Device" | ||
+ | Identifier "Videocard0" | ||
+ | Driver "radeon" | ||
+ | Option "VideoOverlay" "on" | ||
+ | EndSection | ||
+ | |||
+ | Section "Device" | ||
+ | Identifier "aticonfig-Device[0]" | ||
+ | Driver "fglrx" | ||
+ | Option "VideoOverlay" "on" | ||
+ | EndSection | ||
+ | |||
+ | Section "Screen" | ||
+ | Identifier "Screen0" | ||
+ | Device "Videocard0" | ||
+ | Monitor "Monitor0" | ||
+ | DefaultDepth 24 | ||
+ | SubSection "Display" | ||
+ | Viewport 0 0 | ||
+ | Depth 24 | ||
+ | Modes "1280x1024" "1024x768" "800x600" "640x480" | ||
+ | EndSubSection | ||
+ | EndSection | ||
+ | |||
+ | Section "Screen" | ||
+ | Identifier "aticonfig-Screen[0]" | ||
+ | Device "aticonfig-Device[0]" | ||
+ | Monitor "aticonfig-Monitor[0]" | ||
+ | DefaultDepth 24 | ||
+ | SubSection "Display" | ||
+ | Viewport 0 0 | ||
+ | Depth 24 | ||
+ | Modes "1280x1024" "1024x768" "800x600" "640x480" | ||
+ | EndSubSection | ||
+ | EndSection | ||
+ | |||
+ | Section "DRI" | ||
+ | Group 0 | ||
+ | Mode 0666 | ||
+ | EndSection | ||
+ | |||
+ | Section "Extensions" | ||
+ | Option "Composite" "Disable" | ||
+ | EndSection | ||
+ | </nowiki> | ||
+ | |||
+ | Nach den Änderungen empfielt sich ein Neustart des Systems. Danach müsste der Treiber und die 3D-Unterstützung funktionieren. | ||
==NVIDIA-Treiber Installation== | ==NVIDIA-Treiber Installation== |
Version vom 9. Dezember 2006, 12:00 Uhr
Inhaltsverzeichnis
ATI-Treiber Installation
Fedora Core 3
Fedora Core 4
Fedora Core 5
Fedora Core 6
Root werden:
su -
Treiber von Livna.org installieren:
yum install kmod-fglrx
X-Server beenden:
init 3
Als Root anmelden und dann den Treiber aktivieren:
ati-fglrx-config-display enable
Treiber konfigurieren (Singlehead):
aticonfig --initial
X-Server starten:
init 5
/etc/xorg.conf editieren:
- Section "Modules", "DRI" und "Extensions" ergänzen (am Besten dazu mit der Musterkonfiguration vergleichen)
# Modified xorg.conf -- 2006-12-02 Section "ServerLayout" Identifier "single head configuration" Screen 0 "aticonfig-Screen[0]" 0 0 InputDevice "Keyboard0" "CoreKeyboard" EndSection Section "Files" EndSection Section "Module" Load "glx" Load "freetype" Load "dri" EndSection Section "InputDevice" Identifier "Keyboard0" Driver "kbd" Option "XkbModel" "pc105" Option "XkbLayout" "de" EndSection Section "Monitor" Identifier "Monitor0" ModelName "Samsung SyncMaster 959NF" HorizSync 31.5 - 110.0 VertRefresh 50.0 - 160.0 Option "dpms" EndSection Section "Monitor" Identifier "aticonfig-Monitor[0]" Option "VendorName" "ATI Proprietary Driver" Option "ModelName" "Generic Autodetecting Monitor" Option "DPMS" "true" EndSection Section "Device" Identifier "Videocard0" Driver "radeon" Option "VideoOverlay" "on" EndSection Section "Device" Identifier "aticonfig-Device[0]" Driver "fglrx" Option "VideoOverlay" "on" EndSection Section "Screen" Identifier "Screen0" Device "Videocard0" Monitor "Monitor0" DefaultDepth 24 SubSection "Display" Viewport 0 0 Depth 24 Modes "1280x1024" "1024x768" "800x600" "640x480" EndSubSection EndSection Section "Screen" Identifier "aticonfig-Screen[0]" Device "aticonfig-Device[0]" Monitor "aticonfig-Monitor[0]" DefaultDepth 24 SubSection "Display" Viewport 0 0 Depth 24 Modes "1280x1024" "1024x768" "800x600" "640x480" EndSubSection EndSection Section "DRI" Group 0 Mode 0666 EndSection Section "Extensions" Option "Composite" "Disable" EndSection
Nach den Änderungen empfielt sich ein Neustart des Systems. Danach müsste der Treiber und die 3D-Unterstützung funktionieren.