USB-Modem, CDC-Ethernet und SuSE Problem
Autor: Haveaniceday
Nur für 10.0, falls die Geräte unter 9.3 schon unterstützt wurden.
Es gibt ein bekanntes und gelöstes Problem im Bereich USB-Erkennung. Aus diesem Grund werden einige USB-Modem Geräte und USB Ethernetschnittstellen nicht richtig erkannt.
Lösung A: Das Modul "von Hand" in /etc/sysconfig/kernel das Modul in MODULES_LOADED_ON_BOOT="" eintragen.
Lösung B: Warten bis SuSE einen Kernelupdate rausgibt. Edit: "kotd" enthält den Fix.
Lösung C: folgenden Patch in einen selbstgebauten Kernel einbauen: Code:
--- gregkh-2.6.orig/drivers/usb/core/sysfs.c
+++ gregkh-2.6/drivers/usb/core/sysfs.c
@@ -462,30 +462,23 @@ static ssize_t show_modalias(struct devi
{
struct usb_interface *intf;
struct usb_device *udev;
- int len;
+ struct usb_host_interface *alt;
intf = to_usb_interface(dev);
udev = interface_to_usbdev(intf);
+ alt = intf->cur_altsetting;
- len = sprintf(buf, "usb:v%04Xp%04Xd%04Xdc%02Xdsc%02Xdp%02Xic",
- le16_to_cpu(udev->descriptor.idVendor),
- le16_to_cpu(udev->descriptor.idProduct),
- le16_to_cpu(udev->descriptor.bcdDevice),
- udev->descriptor.bDeviceClass,
- udev->descriptor.bDeviceSubClass,
- udev->descriptor.bDeviceProtocol);
- buf += len;
-
- if (udev->descriptor.bDeviceClass == 0) {
- struct usb_host_interface *alt = intf->cur_altsetting;
-
- return len + sprintf(buf, "%02Xisc%02Xip%02X\n",
- alt->desc.bInterfaceClass,
- alt->desc.bInterfaceSubClass,
- alt->desc.bInterfaceProtocol);
- } else {
- return len + sprintf(buf, "*isc*ip*\n");
- }
+ return sprintf(buf, "usb:v%04Xp%04Xd%04Xdc%02Xdsc%02Xdp%02X"
+ "ic%02Xisc%02Xip%02X\n",
+ le16_to_cpu(udev->descriptor.idVendor),
+ le16_to_cpu(udev->descriptor.idProduct),
+ le16_to_cpu(udev->descriptor.bcdDevice),
+ udev->descriptor.bDeviceClass,
+ udev->descriptor.bDeviceSubClass,
+ udev->descriptor.bDeviceProtocol,
+ alt->desc.bInterfaceClass,
+ alt->desc.bInterfaceSubClass,
+ alt->desc.bInterfaceProtocol);
}
static DEVICE_ATTR(modalias, S_IRUGO, show_modalias, NULL);
--- gregkh-2.6.orig/drivers/usb/core/usb.c
+++ gregkh-2.6/drivers/usb/core/usb.c
@@ -569,6 +569,7 @@ static int usb_hotplug (struct device *d
{
struct usb_interface *intf;
struct usb_device *usb_dev;
+ struct usb_host_interface *alt;
int i = 0;
int length = 0;
@@ -585,7 +586,8 @@ static int usb_hotplug (struct device *d
intf = to_usb_interface(dev);
usb_dev = interface_to_usbdev (intf);
-
+ alt = intf->cur_altsetting;
+
if (usb_dev->devnum < 0) {
pr_debug ("usb %s: already deleted?\n", dev->bus_id);
return -ENODEV;
@@ -627,46 +629,27 @@ static int usb_hotplug (struct device *d
usb_dev->descriptor.bDeviceProtocol))
return -ENOMEM;
- if (usb_dev->descriptor.bDeviceClass == 0) {
- struct usb_host_interface *alt = intf->cur_altsetting;
+ if (add_hotplug_env_var(envp, num_envp, &i,
+ buffer, buffer_size, &length,
+ "INTERFACE=%d/%d/%d",
+ alt->desc.bInterfaceClass,
+ alt->desc.bInterfaceSubClass,
+ alt->desc.bInterfaceProtocol))
+ return -ENOMEM;
- /* 2.4 only exposed interface zero. in 2.5, hotplug
- * agents are called for all interfaces, and can use
- * $DEVPATH/bInterfaceNumber if necessary.
- */
- if (add_hotplug_env_var(envp, num_envp, &i,
- buffer, buffer_size, &length,
- "INTERFACE=%d/%d/%d",
- alt->desc.bInterfaceClass,
- alt->desc.bInterfaceSubClass,
- alt->desc.bInterfaceProtocol))
- return -ENOMEM;
-
- if (add_hotplug_env_var(envp, num_envp, &i,
- buffer, buffer_size, &length,
- "MODALIAS=usb:v%04Xp%04Xd%04Xdc%02Xdsc%02Xdp%02Xic%02Xisc%02Xip%02X",
- le16_to_cpu(usb_dev->descriptor.idVendor),
- le16_to_cpu(usb_dev->descriptor.idProduct),
- le16_to_cpu(usb_dev->descriptor.bcdDevice),
- usb_dev->descriptor.bDeviceClass,
- usb_dev->descriptor.bDeviceSubClass,
- usb_dev->descriptor.bDeviceProtocol,
- alt->desc.bInterfaceClass,
- alt->desc.bInterfaceSubClass,
- alt->desc.bInterfaceProtocol))
- return -ENOMEM;
- } else {
- if (add_hotplug_env_var(envp, num_envp, &i,
- buffer, buffer_size, &length,
- "MODALIAS=usb:v%04Xp%04Xd%04Xdc%02Xdsc%02Xdp%02Xic*isc*ip*",
- le16_to_cpu(usb_dev->descriptor.idVendor),
- le16_to_cpu(usb_dev->descriptor.idProduct),
- le16_to_cpu(usb_dev->descriptor.bcdDevice),
- usb_dev->descriptor.bDeviceClass,
- usb_dev->descriptor.bDeviceSubClass,
- usb_dev->descriptor.bDeviceProtocol))
- return -ENOMEM;
- }
+ if (add_hotplug_env_var(envp, num_envp, &i,
+ buffer, buffer_size, &length,
+ "MODALIAS=usb:v%04Xp%04Xd%04Xdc%02Xdsc%02Xdp%02Xic%02Xisc%02Xip%02X",
+ le16_to_cpu(usb_dev->descriptor.idVendor),
+ le16_to_cpu(usb_dev->descriptor.idProduct),
+ le16_to_cpu(usb_dev->descriptor.bcdDevice),
+ usb_dev->descriptor.bDeviceClass,
+ usb_dev->descriptor.bDeviceSubClass,
+ usb_dev->descriptor.bDeviceProtocol,
+ alt->desc.bInterfaceClass,
+ alt->desc.bInterfaceSubClass,
+ alt->desc.bInterfaceProtocol))
+ return -ENOMEM;
envp[i] = NULL;
Bei meinem Fritz!BOX USB Ethernetinterface hat es mit dem Patch geklappt.
http://www.linux-club.de/ftopic45256.html
Quellen und weiterführende Links
- http://www.linux-club.de/viewtopic.php?t=43585 - Der Patch ist aus Bug 105621
