Xorg Konfigurationsdatei Bigdesktop mit Xorg und BerylXgl
Version vom 6. Januar 2008, 21:55 Uhr von Revealed (Diskussion | Beiträge) (→Verwendete Hardware: Abermals aufbesserung des optischen Wertes)
Verwendete Hardware
Hier ein kurzer Überblick über die wichtigsten Eckdaten:
Eine xorg.conf für fglrx mit SUSE und "kernel-default i386 GNU/Linux"
- Verwendet unter SuSE 10.2 und 10.3
- AIGLX ist in der config deaktiviert!
Beide Monitore mit folgenden Einstellungen:
- HorizSync 30.0 - 96.0
- VertRefresh 50.0 - 150.0
- zwei 19" Röhrenmonitore
- Auflösung für den Xserver 1024x768@85 Hz
- Unterstützte Auflösungen: "1024x768,1024x600,800x600,640x480"
- versuchsweise Pairmodes: "1024x768+1024x768" [STRG+ALT (+/-)]
Eingabegeräte (Tastatur/Maus) sind in diesem Fall:
- Logitech Access Keyboard (deutsches Tastenlayout)
- Logitech MX 510 Maus
Grafikkarte:
- ASUS EAX 1950 XTX PCI-E;
Unter SuSE 10.2 Verwendeter Sysconfigwert bei Beryl-Xgl (/etc/syconfig/displaymanager):
- DISPLAYMANAGER_XGL_OPTS="-lines -accel glx:pbuffer -accel xv:pbuffer -xorgAc +xinerama"
# /.../
# modified X11 config file
# (please do not use or modify this file without knowing what it does!)
# for fglrx 8.36.5 Bigdestkopsetup Xgl and Xorg
# used Board X1950 XTX; With openSUSE 10.2
# configured for two equal CRT screens; each with 1024x768 @ 85 Hz
# HorizSync "30.0 - 96.0" VertRefresh "50.0 - 150.0" (both same; refer to monitor manual)
# SuSE 10.2 Xgl: DISPLAYMANAGER_XGL_OPTS="-lines -accel glx:pbuffer -accel xv:pbuffer -xorgAc +xinerama"
# before beryl went compiz fusion.
# Logitech Access Keyboard (german Layout) and Logitech MX510 Mouse
# see comments for BusID; etc.
# Original and import of Sax2:
Section "ServerLayout"
Identifier "aticonfig-Layout[all]"
InputDevice "Keyboard[0]" "CoreKeyboard"
InputDevice "Mouse[1]" "CorePointer"
Screen 0 "aticonfig-Screen[0]" 0 0
Option "Clone" "off" # from Sax2 and Bigdesktop is set ;)
Option "Xinerama" "off" # using "in driver Xinerama Extension"
EndSection
# Original:
Section "Files"
FontPath "/usr/share/fonts/misc:unscaled"
FontPath "/usr/share/fonts/local"
FontPath "/usr/share/fonts/75dpi:unscaled"
FontPath "/usr/share/fonts/100dpi:unscaled"
FontPath "/usr/share/fonts/Type1"
FontPath "/usr/share/fonts/URW"
FontPath "/usr/share/fonts/Speedo"
FontPath "/usr/share/fonts/PEX"
FontPath "/usr/share/fonts/cyrillic"
FontPath "/usr/share/fonts/latin2/misc:unscaled"
FontPath "/usr/share/fonts/latin2/75dpi:unscaled" # All fontpaths may be used depends on
FontPath "/usr/share/fonts/latin2/100dpi:unscaled" # installation and installed fonts
FontPath "/usr/share/fonts/latin2/Type1" # etc.
FontPath "/usr/share/fonts/latin7/75dpi:unscaled"
FontPath "/usr/share/fonts/baekmuk:unscaled"
FontPath "/usr/share/fonts/japanese:unscaled"
FontPath "/usr/share/fonts/kwintv"
FontPath "/usr/share/fonts/truetype"
FontPath "/usr/share/fonts/uni:unscaled"
FontPath "/usr/share/fonts/CID"
FontPath "/usr/share/fonts/ucs/misc:unscaled"
FontPath "/usr/share/fonts/ucs/75dpi:unscaled"
FontPath "/usr/share/fonts/ucs/100dpi:unscaled"
FontPath "/usr/share/fonts/hellas/misc:unscaled"
FontPath "/usr/share/fonts/hellas/75dpi:unscaled"
FontPath "/usr/share/fonts/hellas/100dpi:unscaled"
FontPath "/usr/share/fonts/hellas/Type1"
FontPath "/usr/share/fonts/misc/sgi:unscaled"
FontPath "/usr/share/fonts/xtest"
FontPath "/opt/kde3/share/fonts"
FontPath "unix/:7100"
InputDevices "/dev/gpmdata"
InputDevices "/dev/input/mice"
EndSection
# Sax2 import:
Section "Module" # necessary modules
Load "dbe"
Load "type1"
Load "freetype"
Load "extmod"
Load "glx"
Load "v4l"
Load "dri"
EndSection
# Sax2 import and additional:
Section "ServerFlags"
Option "AIGLX" "off" # due to lack of support?!?
Option "AllowMouseOpenFail" "on"
Option "IgnoreABI" "on"
EndSection
# Sax2 import:
Section "InputDevice" # Logitech Acess Keyboard
Driver "kbd" # german Keyboard layout
Identifier "Keyboard[0]"
Option "Protocol" "Standard"
Option "XkbLayout" "de"
Option "XkbModel" "logiaccess"
Option "XkbRules" "xfree86"
Option "XkbVariant" "nodeadkeys"
EndSection
# Sax2 import:
Section "InputDevice"
Driver "mouse" # Logitech MX 510
Identifier "Mouse[1]" # no special settings
Option "Buttons" "10"
Option "Device" "/dev/input/mice"
Option "Name" "Logitech USB-PS/2 Optical Mouse"
Option "Protocol" "explorerps/2"
Option "Vendor" "Sysp"
Option "ZAxisMapping" "4 5"
EndSection
# aticonfig import:
Section "Monitor"
Identifier "aticonfig-Monitor[0]"
HorizSync 30.0 - 96.0 # Hsynch first Monitor
VertRefresh 50.0 - 150.0 # Vsynch first Monitor
DisplaySize 400 300 # special for my screens
# Option "VendorName" "ATI Proprietary Driver" # <- because unused
# Option "ModelName" "Generic Autodetecting Monitor" # ""
Option "DPMS" "true"
EndSection
# aticonfig import and additional (modified):
Section "Device"
BoardName "ASUS EAX 1950 XTX" # ;)
BusID "" # your BUS ID FOR ADAPTER #example: BusID "1:0:0"
Driver "fglrx"
Identifier "aticonfig-Device[0]"
Option "CenterMode" "off"
# Option "mtrr" "off" # only Mainmemory in mtrr since 10.3? # Unused with PCI-E card?
Option "HSync2" "30-96" # Hsync Monitor 2
Option "VRefresh2" "50-150" # Vsync Monitor 2
Option "OverlayOnCRTC2" "1" # Overlay
Option "DesktopSetup" "Horizontal,Reverse" # Desktopsetup (reverse)
Option "ForceMonitors" "auto,crt1" # CRT Screens
Option "Mode2" "1024x768,1024x600,800x600,640x480" # Modes Monitor 2
Option "PairModes" "1024x768+1024x768" # pairmodes ;)
Option "GammaCorrectionI" "0x06419064"
Option "GammaCorrectionII" "0x06419064"
Option "ForceGenericCPU" "no" # set to "yes" if cpu detected uncorrectly
Option "UseFastTLS" "0" # for wine; etc. (unnecessary)
Option "BlockSignalsOnLock" "on"
# Option "FSAAEnable" "on" # AMD ATI CCC
Option "Capabilities" "0x00000800"
# Option "FSAAScale" "0" # AMD ATI CCC
Option "FSAADisableGamma" "on"
Option "VideoOverlay" "off" # There Can Be Only One of each ;)
Option "OpenGLOverlay" "on" # There Can Be Only One either ;)
Option "ForceGenericCPU" "no"
Option "XAANoOffscreenPixmaps" "true" # for "xine"
Option "KernelModuleParm" "locked-userpages=0"
Option "UseInternalAGPGART" "no" # for AGP cards ?
# Option "MaxGARTSize" "256" # (useless f. PCI-E) tuned GART Size (AGP?)
Option "Stereo" "off" # unused in my case
Option "no_dri" "no" # alias for DRI yes (true)!
Option "no_accel" "no"
Option "ScreenOverlap" "0"
Option "PseudoColorVisuals" "off"
Option "StereoSyncEnable" "0" # prevent tearing effect
Option "EnablePrivateBackZ" "no" # Z buffer?
# Option "backingstore" "true" # Commenting (removal)resolves redraw prob
EndSection
# aticonfig import:
Section "Screen"
Identifier "aticonfig-Screen[0]"
Device "aticonfig-Device[0]"
Monitor "aticonfig-Monitor[0]"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 24
Modes "1024x768" "800x600" "640x480" # resolutions
EndSubSection
EndSection
# SaX2 import (modified):
Section "DRI"
Group "video"
Mode 0666 # POSIX and permissions (/dev/shm)
EndSection
# Sax2 import (additional):
Section "Extensions"
Option "DAMAGE" "false" # setting depending on AIGLX/XGL ("true" for SuSE10.3)
Option "Composite" "false" # setting depending on AIGLX/XGL ("on" for SuSE 10.3)
EndSection
Problem, dass beim Scrollen, verschieben von Icons und im Kmenü Darstellungsfehler auftreten? siehe: Hilfe Darstellungsproblem KDE
Anmerkung: I am using a ASUS EAX 1950 XTX, please fix this: It has 512 MB RAM not 256!
