Ion3

Ion3
Ion3 Screenshot
Basisdaten
Entwickler:	Tuomo Valkonen
Aktuelle Version:	ion-3-20080707
letzte Veröffentlichung:	7. Juli 2008
Betriebssystem:	Linux, BSD, Unix
Kategorie:	Windowmanager
Lizenz:	LGPL mit Klausel
Deutschsprachig:
Webseite:	Ion Webseite

Diese Beschreibung wurde mit folgenden Distributionen getestet:

Debian 4.0

Info

Der Ion Fenster.- oder Windowsmanager ist der Nachvolger vom PWM Fenstermanager. Er läuft unter dem X11 System, ist extrem klein, schlank und schnell (Ressourcenschonend). Das besondere an Ion ist das sich alle geöffneten Fenster niemals überlappen. Dies heisst das alle geöffneten Fenster zu jeder Zeit sichtbar sind. Funktionieren tut die ganze Sache mit Hilfe eines Areals in welchem ein Fenster oder auch mehrere geöffnet werden können. Der gesamte Bildschirm wird unter den Areals oder auch Frames genannt aufgeteilt. Sind in einem Areal mehrere Fenster geöffnet, so bekommt hier jedes seine eigene Registerreiter ueber welche es angewählt werden kann. Im Screenshot neben an sind derzeit 4 Areals (Frames) zu sehen, in jedem ist die Konsole-RoxTerm und in ihr ein Programm gestartet. Diese gestartete Anwendung (RoxTerm/Programm) sind in einem Fenster untergebracht welches einen Registerreiter hat.

Lizenz

Der Macher von Ion - Tuomo Valkonen hat eine Lizenzaenderung vorgenommen:

„Versions not based on the copyright holder's latest release (on the corresponding "branch", such as Ion3(tm)), must within 28 days of this release, be prominently marked as (potentially) obsolete and unsupported. Significantly altered versions may be provided only if the user explicitly requests for those modifications to be applied, and is prominently notified that the software is no longer considered the standard version, and is not supported by the copyright holder. The version string displayed by the program must describe these modifications and the "support void" status.“

• Ion3 license violation

Dies heisst soviel wie das alle (Distributoren) die Ion3 Pakete anbieten, ihre Pakete die nach einem naechsten Ion3 Release von Tuomo Valkonen aktualisieren muessen. Falls dies nicht spaetestens nach 28 Tagen geschieht, muessen sie als veraltet oder unsupported markiert werden.

Nach dieser Bekanntgabe haben die Distributionen Arch Linux, FreeBSD und NetBSD ihre Ion3 Pakete herrausgenommen.

Alternativen

Als Alternative zu Ion gibt es folgende andere Fenstermanager:

• LarsWM
• Ratpoison
• StumpWM
• WMI
• WMII
• TrsWM
• DWM

Funktionstasten

In der Regel sind die Funktionstasten bei Ion folgendermaßen bestückt:

• F1 - Die Manpages anzeigen
• F2 - Ein eues Terminal
• F3 - Ein Programme starten
• F4 - Eine SSH-Verbindung herstellen
• F5 - Datei editieren
• F6 - Datei anzeigen
• F9 - Erstellen einer neuen Arbeitsfläche (Areal/Frame)
• F12 - Das Hauptmenü

• ALT + S - Eine Area oder Frame vertikal splitten
• ALT + KS - Eine Area oder Frame horizontal splitten

Installation

Debian

Wie immer gestaltet sich die Installation unter Debian recht einfach mit Hilfe von APT.

• Die Ion3 Version liegt derzeit bei GNU/Debian im SID Non-Free Bereich.

• Ausgenommen Debian Sarge:
  • ion3 (20050502-2)

apt-get update
apt-get install ion3

Konfigurationsdateien

ämtliche Konfigurationsdateien welche Systemweit für alle Benutzer gelten sind in der Regel unter /etc/X11/ion3 zu finden. Wer seinen Ion nicht Systemweit für alle gleich sondern für jeden Benutzer anderst konfigurieren möchte kann hierzu die entsprechenden Konfigurationsdateien im /home/ ~ /.ion3 Verzeichniss anlegen.

Die wohl wichtigsten Konfigurationsdateien sind:

• cfg_ioncore.lua
• cfg_statusbar.lua
• cfg_menu.lua

In der ersten Konfigurationsdateien koennen Tastenkombinationen entsprechend konfigurirt werden wie auch die F-Tasten Belegung. In der Zweiten werden Einstellungen zur Statusbar vorgenommen. Diverse Lua-Scripts fuer die Statusbar koennen hier eingebunden werden. In der letzten kann das Menue konfiguriert werden.

F-Tasten

Die Funktion der F-Tasten ist eigentlich gar nicht mal so schlecht, doch leider bei manchen Anwendungen welche selbst die F-Tasten benötigen extrem störend. zum Beispiel wird beim Arbeiten im MC das Betätigen der F-Tasten die Funktion vom Ion und nicht vom MC selbst ausführen. Drücke ich z.B. F-5 so wird die Option von Ion für das Editieren geöffnet anstelle die Option im MC für das Kopieren einer Datei. Wie können wir das Problem am einfachsten lösen. Ganz einfach, wir entfernen die Funktionen aus der entsprechenden Konfigurationsdatet so, das die F--Tasten von F1--10 keine Funktion mehr in Ion beim drücken haben.

Tastenkombinationen

Das aufrufen des Menüs lassen wir weiterhin auf der F12 Taste liegen. In dem von mir hier gezeigten Beispiel ist es als Terminal RoxTerm und Rxvt auf die Tastenkombination ALT+T und ALT+R gelegt. Mit der Kombination ALT+E wird Esetroot gestartet um ein Wallpaper bei transparentem Terminal anzeigen zu lassen (Der Pfad zum Wallpaper muss entsprechend angepasst werden). Bai ALT+W wird eine neue Arbeitsflaeche erstellt durch welche mit ALT+1 bis ALT+9 durchgewechselt werden kann.

cfg_ioncore.lua

--
-- Ion core configuration file
--


-- 
-- Bindings. This includes global bindings and bindings common to
-- screens and all types of frames only. See modules' configuration 
-- files for other bindings.
--


-- WScreen context bindings
--
-- The bindings in this context are available all the time.
--
-- The variable META should contain a string of the form 'Mod1+'
-- where Mod1 maybe replaced with the modifier you want to use for most
-- of the bindings. Similarly ALTMETA may be redefined to add a 
-- modifier to some of the F-key bindings.

defbindings("WScreen", {
    bdoc("Switch to n:th object (workspace, full screen client window) "..
         "within current screen."),
    kpress(META.."1", "WScreen.switch_nth(_, 0)"),
    kpress(META.."2", "WScreen.switch_nth(_, 1)"),
    kpress(META.."3", "WScreen.switch_nth(_, 2)"),
    kpress(META.."4", "WScreen.switch_nth(_, 3)"),
    kpress(META.."5", "WScreen.switch_nth(_, 4)"),
    kpress(META.."6", "WScreen.switch_nth(_, 5)"),
    kpress(META.."7", "WScreen.switch_nth(_, 6)"),
    kpress(META.."8", "WScreen.switch_nth(_, 7)"),
    kpress(META.."9", "WScreen.switch_nth(_, 8)"),
    kpress(META.."0", "WScreen.switch_nth(_, 9)"),
    
    bdoc("Switch to next/previous object within current screen."),
    kpress(META.."comma", "WScreen.switch_prev(_)"),
    kpress(META.."period", "WScreen.switch_next(_)"),

    submap(META.."K", {
        bdoc("Go to first region demanding attention or previously active one."),
        kpress("K", "mod_menu.grabmenu(_, _sub, 'focuslist')"),
        -- Alternative without (cyclable) menu
        --kpress("K", "ioncore.goto_activity() or ioncore.goto_previous()"),

        --bdoc("Go to previous active object."),
        --kpress("K", "ioncore.goto_previous()"),
        
        --bdoc("Go to first object on activity/urgency list."),
        --kpress("I", "ioncore.goto_activity()"),
        
        bdoc("Clear all tags."),
        kpress("T", "ioncore.tagged_clear()"),
    }),

    bdoc("Go to n:th screen on multihead setup."),
    kpress(META.."Shift+1", "ioncore.goto_nth_screen(0)"),
    kpress(META.."Shift+2", "ioncore.goto_nth_screen(1)"),
    
    bdoc("Go to next/previous screen on multihead setup."),
    kpress(META.."Shift+comma", "ioncore.goto_prev_screen()"),
    kpress(META.."Shift+period", "ioncore.goto_next_screen()"),
    
    bdoc("Create a new workspace of chosen default type."),
    kpress(META.."W", "ioncore.create_ws(_)"),


    
    bdoc("Display the main menu."),
    kpress(ALTMETA.."F12", "mod_query.query_menu(_, _sub, 'mainmenu', 'Main menu:')"),
    --kpress(ALTMETA.."F12", "mod_menu.menu(_, _sub, 'mainmenu', {big=true})"),
    mpress("Button3", "mod_menu.pmenu(_, _sub, 'mainmenu')"),
    
    bdoc("Display the window list menu."),
    mpress("Button2", "mod_menu.pmenu(_, _sub, 'windowlist')"),

    bdoc("Forward-circulate focus."),
    -- '_chld' used here stands to for an actual child window that may not
    -- be managed by the screen itself, unlike '_sub', that is likely to be
    -- the managing group of that window. The right/left directions are
    -- used instead of next/prev, because they work better in conjunction
    -- with tilings.
    kpress(META.."Tab", "ioncore.goto_next(_chld, 'right')", 
           "_chld:non-nil"),
    submap(META.."K", { 
        bdoc("Backward-circulate focus."),
        kpress("AnyModifier+Tab", "ioncore.goto_next(_chld, 'left')", 
               "_chld:non-nil"),
        
        bdoc("Raise focused object, if possible."),
        kpress("AnyModifier+R", "WRegion.rqorder(_chld, 'front')",
               "_chld:non-nil"),
    }),

})


-- Client window bindings
--
-- These bindings affect client windows directly.

defbindings("WClientWin", {
    bdoc("Nudge the client window. This might help with some "..
         "programs' resizing problems."),
    kpress_wait(META.."L", "WClientWin.nudge(_)"),
    
    submap(META.."K", {
       bdoc("Kill client owning the client window."),
       kpress("C", "WClientWin.kill(_)"),
       
       bdoc("Send next key press to the client window. "..
            "Some programs may not allow this by default."),
       kpress("Q", "WClientWin.quote_next(_)"),
    }),
})


-- Client window group bindings

defbindings("WGroupCW", {
    bdoc("Toggle client window group full-screen mode"),
    kpress_wait(META.."Return", "WGroup.set_fullscreen(_, 'toggle')"),
})


-- WMPlex context bindings
--
-- These bindings work in frames and on screens. The innermost of such
-- contexts/objects always gets to handle the key press. 

defbindings("WMPlex", {
    bdoc("Close current object."),
    kpress_wait(META.."C", "WRegion.rqclose_propagate(_, _sub)"),
    
    submap(META.."K", {
        bdoc("Detach (float) or reattach an object to its previous location."),
        -- By using _chld instead of _sub, we can detach/reattach queries
        -- attached to a group. The detach code checks if the parameter 
        -- (_chld) is a group 'bottom' and detaches the whole group in that
        -- case.
        kpress("D", "ioncore.detach(_chld, 'toggle')", "_chld:non-nil"),
    }),
})

-- Frames for transient windows ignore this bindmap

defbindings("WMPlex.toplevel", {
    bdoc("Toggle tag of current object."),
    kpress(META.."T", "WRegion.set_tagged(_sub, 'toggle')", "_sub:non-nil"),

--    bdoc("Query for manual page to be displayed."),
--    kpress(ALTMETA.."F1", "mod_query.query_man(_, ':man')"),

--    bdoc("Show the Ion manual page."),
--    kpress(META.."F1", "ioncore.exec_on(_, ':man ion3')"),

    bdoc("Run a terminal emulator."),
    kpress(META.."T", "ioncore.exec_on(_, XTERM or 'x-terminal-emulator')"),

    
    bdoc("Run a terminal emulator."),
    kpress(META.."E", "ioncore.exec_on(_, XTERM or 'Esetroot /home/tobi/Bilder/Wallpaper/Modells/Models003.png')"),


    bdoc("Run a terminal emulator."),
    kpress(META.."R", "ioncore.exec_on(_, XTERM or 'rxvt -bg black -fg white -cr red -fb Monospace-9 +sb')"),
    

    bdoc("Query for command line to execute."),
    kpress(META.."P", "mod_query.query_exec(_)"),

--    bdoc("Query for Lua code to execute."),
--    kpress(META.."F3", "mod_query.query_lua(_)"),

--    bdoc("Query for host to connect to with SSH."),
--    kpress(ALTMETA.."F4", "mod_query.query_ssh(_, ':ssh')"),

--    bdoc("Query for file to edit."),
--    kpress(ALTMETA.."F5", 
--           "mod_query.query_editfile(_, 'run-mailcap --action=edit')"),

--    bdoc("Query for file to view."),
--    kpress(ALTMETA.."F6", 
--           "mod_query.query_runfile(_, 'run-mailcap --action=view')"),

--    bdoc("Query for workspace to go to or create a new one."),
--    kpress(ALTMETA.."F9", "mod_query.query_workspace(_)"),
    
    bdoc("Query for a client window to go to."),
    kpress(META.."G", "mod_query.query_gotoclient(_)"),
    
    bdoc("Display context menu."),
    --kpress(META.."M", "mod_menu.menu(_, _sub, 'ctxmenu')"),
    kpress(META.."M", "mod_query.query_menu(_, _sub, 'ctxmenu', 'Context menu:')"),
})


-- WFrame context bindings
--
-- These bindings are common to all types of frames. Some additional
-- frame bindings are found in some modules' configuration files.

defbindings("WFrame", {
    submap(META.."K", {
        bdoc("Maximize the frame horizontally/vertically."),
        kpress("H", "WFrame.maximize_horiz(_)"),
        kpress("V", "WFrame.maximize_vert(_)"),
    }),
    
    bdoc("Display context menu."),
    mpress("Button3", "mod_menu.pmenu(_, _sub, 'ctxmenu')"),
    
    bdoc("Begin move/resize mode."),
    kpress(META.."R", "WFrame.begin_kbresize(_)"),
    
    bdoc("Switch the frame to display the object indicated by the tab."),
    mclick("Button1@tab", "WFrame.p_switch_tab(_)"),
    mclick("Button2@tab", "WFrame.p_switch_tab(_)"),
    
    bdoc("Resize the frame."),
    mdrag("Button1@border", "WFrame.p_resize(_)"),
    mdrag(META.."Button3", "WFrame.p_resize(_)"),
    
    bdoc("Move the frame."),
    mdrag(META.."Button1", "WFrame.p_move(_)"),
    
    bdoc("Move objects between frames by dragging and dropping the tab."),
    mdrag("Button1@tab", "WFrame.p_tabdrag(_)"),
    mdrag("Button2@tab", "WFrame.p_tabdrag(_)"),
           
})

-- Frames for transient windows ignore this bindmap

defbindings("WFrame.toplevel", {
    bdoc("Query for a client window to attach."),
    kpress(META.."A", "mod_query.query_attachclient(_)"),
    
    submap(META.."K", {
        -- Display tab numbers when modifiers are released
        submap_wait("ioncore.tabnum.show(_)"),
        
        bdoc("Switch to n:th object within the frame."),
        kpress("1", "WFrame.switch_nth(_, 0)"),
        kpress("2", "WFrame.switch_nth(_, 1)"),
        kpress("3", "WFrame.switch_nth(_, 2)"),
        kpress("4", "WFrame.switch_nth(_, 3)"),
        kpress("5", "WFrame.switch_nth(_, 4)"),
        kpress("6", "WFrame.switch_nth(_, 5)"),
        kpress("7", "WFrame.switch_nth(_, 6)"),
        kpress("8", "WFrame.switch_nth(_, 7)"),
        kpress("9", "WFrame.switch_nth(_, 8)"),
        kpress("0", "WFrame.switch_nth(_, 9)"),
        
        bdoc("Switch to next/previous object within the frame."),
        kpress("N", "WFrame.switch_next(_)"),
        kpress("P", "WFrame.switch_prev(_)"),
        
        bdoc("Move current object within the frame left/right."),
        kpress("comma", "WFrame.dec_index(_, _sub)", "_sub:non-nil"),
        kpress("period", "WFrame.inc_index(_, _sub)", "_sub:non-nil"),
               
        bdoc("Maximize the frame horizontally/vertically."),
        kpress("H", "WFrame.maximize_horiz(_)"),
        kpress("V", "WFrame.maximize_vert(_)"),

        bdoc("Attach tagged objects to this frame."),
        kpress("A", "ioncore.tagged_attach(_)"),
    }),
})

-- Bindings for floating frames.

defbindings("WFrame.floating", {
    bdoc("Toggle shade mode"),
    mdblclick("Button1@tab", "WFrame.set_shaded(_, 'toggle')"),
    
    bdoc("Raise the frame."),
    mpress("Button1@tab", "WRegion.rqorder(_, 'front')"),
    mpress("Button1@border", "WRegion.rqorder(_, 'front')"),
    mclick(META.."Button1", "WRegion.rqorder(_, 'front')"),
    
    bdoc("Lower the frame."),
    mclick(META.."Button3", "WRegion.rqorder(_, 'back')"),
    
    bdoc("Move the frame."),
    mdrag("Button1@tab", "WFrame.p_move(_)"),
})


-- WMoveresMode context bindings
-- 
-- These bindings are available keyboard move/resize mode. The mode
-- is activated on frames with the command begin_kbresize (bound to
-- META.."R" above by default).

defbindings("WMoveresMode", {
    bdoc("Cancel the resize mode."),
    kpress("AnyModifier+Escape","WMoveresMode.cancel(_)"),

    bdoc("End the resize mode."),
    kpress("AnyModifier+Return","WMoveresMode.finish(_)"),

    bdoc("Grow in specified direction."),
    kpress("Left",  "WMoveresMode.resize(_, 1, 0, 0, 0)"),
    kpress("Right", "WMoveresMode.resize(_, 0, 1, 0, 0)"),
    kpress("Up",    "WMoveresMode.resize(_, 0, 0, 1, 0)"),
    kpress("Down",  "WMoveresMode.resize(_, 0, 0, 0, 1)"),
    kpress("F",     "WMoveresMode.resize(_, 1, 0, 0, 0)"),
    kpress("B",     "WMoveresMode.resize(_, 0, 1, 0, 0)"),
    kpress("P",     "WMoveresMode.resize(_, 0, 0, 1, 0)"),
    kpress("N",     "WMoveresMode.resize(_, 0, 0, 0, 1)"),
    
    bdoc("Shrink in specified direction."),
    kpress("Shift+Left",  "WMoveresMode.resize(_,-1, 0, 0, 0)"),
    kpress("Shift+Right", "WMoveresMode.resize(_, 0,-1, 0, 0)"),
    kpress("Shift+Up",    "WMoveresMode.resize(_, 0, 0,-1, 0)"),
    kpress("Shift+Down",  "WMoveresMode.resize(_, 0, 0, 0,-1)"),
    kpress("Shift+F",     "WMoveresMode.resize(_,-1, 0, 0, 0)"),
    kpress("Shift+B",     "WMoveresMode.resize(_, 0,-1, 0, 0)"),
    kpress("Shift+P",     "WMoveresMode.resize(_, 0, 0,-1, 0)"),
    kpress("Shift+N",     "WMoveresMode.resize(_, 0, 0, 0,-1)"),
    
    bdoc("Move in specified direction."),
    kpress(META.."Left",  "WMoveresMode.move(_,-1, 0)"),
    kpress(META.."Right", "WMoveresMode.move(_, 1, 0)"),
    kpress(META.."Up",    "WMoveresMode.move(_, 0,-1)"),
    kpress(META.."Down",  "WMoveresMode.move(_, 0, 1)"),
    kpress(META.."F",     "WMoveresMode.move(_,-1, 0)"),
    kpress(META.."B",     "WMoveresMode.move(_, 1, 0)"),
    kpress(META.."P",     "WMoveresMode.move(_, 0,-1)"),
    kpress(META.."N",     "WMoveresMode.move(_, 0, 1)"),
})


--
-- Menu definitions
--


-- Main menu
defmenu("mainmenu", {
    menuentry("Run...",         "mod_query.query_exec(_)"),
    menuentry("Terminal",       "ioncore.exec_on(_, XTERM or 'x-terminal-emulator')"),
    menuentry("Lock screen",
              "ioncore.exec_on(_, ioncore.lookup_script('ion-lock'))"),
    menuentry("Help",           "mod_query.query_man(_)"),
    menuentry("About Ion",      "mod_query.show_about_ion(_)"),
    submenu("Styles",           "stylemenu"),
    submenu("Debian",           "Debian"),
    submenu("Session",          "sessionmenu"),
})


-- Session control menu
defmenu("sessionmenu", {
    menuentry("Save",           "ioncore.snapshot()"),
    menuentry("Restart",        "ioncore.restart()"),
    menuentry("Restart TWM",    "ioncore.restart_other('twm')"),
    menuentry("Exit",           "ioncore.shutdown()"),
})


-- Context menu (frame actions etc.)
defctxmenu("WFrame", "Frame", {
    -- Note: this propagates the close to any subwindows; it does not
    -- destroy the frame itself, unless empty. An entry to destroy tiled
    -- frames is configured in cfg_tiling.lua.
    menuentry("Close",          "WRegion.rqclose_propagate(_, _sub)"),
    -- Low-priority entries
    menuentry("Attach tagged", "ioncore.tagged_attach(_)", { priority = 0 }),
    menuentry("Clear tags",    "ioncore.tagged_clear()", { priority = 0 }),
    menuentry("Window info",   "mod_query.show_tree(_, _sub)", { priority = 0 }),
})


-- Context menu for groups (workspaces, client windows)
defctxmenu("WGroup", "Group", {
    menuentry("Toggle tag",     "WRegion.set_tagged(_, 'toggle')"),
    menuentry("De/reattach",    "ioncore.detach(_, 'toggle')"), 
})


-- Context menu for workspaces
defctxmenu("WGroupWS", "Workspace", {
    menuentry("Close",          "WRegion.rqclose(_)"),
    menuentry("Rename",         "mod_query.query_renameworkspace(nil, _)"),
    menuentry("Attach tagged",  "ioncore.tagged_attach(_)"),
})


-- Context menu for client windows
defctxmenu("WClientWin", "Client window", {
    menuentry("Kill",           "WClientWin.kill(_)"),
})

-- Auto-generated Debian menu definitions
if os and os.execute("test -x /usr/bin/update-menus") == 0 then
    if ioncore.is_i18n() then
        dopath("debian-menu-i18n")
    else
        dopath("debian-menu")
    end

cfg_statusbar.lua

Um die Statuszeile in Ion anzupassen muess die cfg_statusbar.lua angepasst werden.

--
-- Ion statusbar module configuration file
-- 


-- Create a statusbar
mod_statusbar.create{
    -- First screen, bottom left corner
    screen=0,
    pos='bl',
    -- Set this to true if you want a full-width statusbar
    fullsize=false,
    -- Swallow systray windows
    systray=true,

    -- Template. Tokens %string are replaced with the value of the 
    -- corresponding meter. Currently supported meters are:
    --   date          date
    --   load          load average (1min, 5min, 15min)
    --   load_Nmin     N minute load average (N=1, 5, 15)
    --   mail_new      mail count (mbox format file $MAIL)
    --   mail_unread   mail count
    --   mail_total    mail count
    --   mail_*_new    mail count (from an alternate mail folder, see below)
    --   mail_*_unread mail count
    --   mail_*_total  mail count
    --
    -- Space preceded by % adds stretchable space for alignment of variable
    -- meter value widths. > before meter name aligns right using this 
    -- stretchable space , < left, and | centers.
    -- Meter values may be zero-padded to a width preceding the meter name.
    -- These alignment and padding specifiers and the meter name may be
    -- enclosed in braces {}.
    --
    -- %filler causes things on the marker's sides to be aligned left and
    -- right, respectively, and %systray is a placeholder for system tray
    -- windows and icons.
    --

    
    --  Zusatzliche Lua Skripte werden in die Statusbar mit eingebunden.
    --  template="[ %date || load:% %>load || MEM Used: %mem_hused MB - Free: %mem_hfree MB || CPU: %cpustat_user || KB/s In: %netmon_kbsin Out: %netmon_kbsout ]",

    --  Default Statusbar
    --  template="[ %date || load: %05load_1min || mail: %02mail_new/%02mail_total ] %filler%systray",

    --  Derzeit aktiev
        template="[ %date || load: %05load_1min",
    
}


-- Launch ion-statusd. This must be done after creating any statusbars
-- for necessary statusd modules to be parsed from the templates.
mod_statusbar.launch_statusd{
    
    -- Date meter
    date={
        -- ISO-8601 date format with additional abbreviated day name
        date_format='%a %Y-%m-%d %H:%M',
        -- Finnish etc. date format
        --date_format='%a %d.%m.%Y %H:%M',
        -- Locale date format (usually shows seconds, which would require
        -- updating rather often and can be distracting)
        --date_format='%c',
        
        -- Additional date formats. 
        --[[ 
        formats={ 
            time = '%H:%M', -- %date_time
        }
        --]]
    },      

    -- Load meter
    load={
        --update_interval=10*1000,
        --important_threshold=1.5,
        --critical_threshold=4.0,
    },

    -- Mail meter
    --
    -- To monitor more mbox files, add them to the files table.  For
    -- example, add mail_work_new and mail_junk_new to the template
    -- above, and define them in the files table:
    --
    -- files = { work = "/path/to/work_email", junk = "/path/to/junk" }
    --
    -- Don't use the keyword 'spool' as it's reserved for mbox.
    mail={
        --update_interval=60*1000,
        --mbox=os.getenv("MAIL"),
        --files={},
    },

Die Zeile

template="[ %date || load: %05load_1min ",

ist die interessante. Hier kann entsprechend konfiguriert werden. In meinem Beispiel wird der Tag, Datum, Uhrzeit und Loadwert angezeigt. Ich habe die Defaulteinstellung ebenfalls in der Datei stehen lassen und zudem eine von mir verwendete Version mit eingetragen bei welcher ein paar Lua Skripte mit eingebunden werden um CPU Auslastung, RAM Speicherverbrauch und Netzwerkdurchlass anzuzeigen.

Damit zusaetzliche Lua Skripte unter Ion funktionieren muessen sie ins ion3 Verzeichniss kopiert werden. In den Skripten selbst ist meistens genau beschrieben wie weiter vorgegangen werden muss. Meistens muessen Pfade angepasst werden oder ein paar kleine Einstellungen wie z.B. Netzwerkinterface usw. Bekommen tut man diese Skripte auf der Ion Webseite oder beim Distributor. Ich fuege ein paar Skripte hier ins Wiki mit ein, es sind diese welche auch in dem Konfigurationsbeispiel der cfg_statusbar.lua eingetragen sind.

Download Ion Scripts

statusd_mem.lua

Fuer die Anzeige des freien RAM Speichers in der Statusbar.

Wird durch MEM Used: %mem_hused MB - Free: %mem_hfree MB eingebunden.

-------------------------------------------------------------------------------------------
--
--	PURPOSE: 
--	Shows system available memory catching [free] command outputs.
--	It is intended to make it simpler than statusd_meminfo, plus user configurable 
--	measurement units and alarms for "all" available memory metters. 
--
--	USAGE:
--	Just set any of the following labels on cfg_statusbar.lua: %mem_hused, %mem_shared
--	%mem_free, %mem_hfree, %mem_swap, %mem_used, %mem_cached. Example: [MF: %mem_free]
--	
--	MEANINGS:
-->	** "mem_hfree" poses as "htop free memory" or "mem_free +cached +buffers",
--	in oposition, "mem_hused" is "mem_used -cached -buffers"; other labels have
--	transparent meanings.
--
------- CONFIG EXAMPLE:	------------------------------------------------------------------
--
--	To modify settings is quite simple and flexible, write (on cfg_statusbar.lua)
--	something like this, without comments:
--					mem = {
--					   update_interval = 15*1000, --> Milliseconds
--					   free_alarm = 25,   --> Limits percentaje ...
--					   used_alarm = 65,
--					   units = "m" 	      --> "g" or "k" too
--					   }
--	Write only the settings that do you want to change or leave this section as is...
-->	** "update_interval" means "time in milliseconds to update info (default = 15)"
--	"xx_alarm" means "do a color advise when memory *percentage* reaches this value".
--	(both defaults are 50). "units" means Gb "g", Mb "m" or Kb "k" (default = "m")
------------------------------------------------------------------------------------------
--
--	NOTES: 
--    *	Alarms for used memory are inverse to alarms for free memory (think about it...)
--	"mem_total" label is useless. If total memory varies, its time to open your
--	hardware and check this script from barebone. Seriously, may be your video or wifi
--	devices were claiming some free R.A.M. on your machine start-up. 
--	However, I included "mem_total" just in case.
--   ** This script has non blocking I/O.
--
--	LICENSE: 
--	GPL2 Copyright(C)2006 Mario Garcia H.
--	(Please see http://www.gnu.org/licenses/gpl.html to read complete license)
--
--	T.STAMP: Thu Dec  7 03:28:04 2006
--	
--	DEPENDS: "free" command. Probably, all GNU/Linux distros have one.
--	
--	INSECTS: Not known. 
--	
--	CONTACT:
--	G.H. <drosophila (at) nmental (dot) com>
--
------- DEFAULT SETTINGS :-----------------------------------------------------------------

local mem_timer
local defaults = { update_interval = 15*1000, free_alarm = 50, used_alarm = 50, units = "m" }
local settings = table.join(statusd.get_config("mem"), defaults)

------- MEM MONITOR :----------------------------------------------------------------------

local function show_meminfo(status)
	while status do	
		local ok, _, total, used, free, shared, buffers, cached =--
		string.find(status, "Mem:%s+(%d+)%s+(%d+)%s+(%d+)%s+(%d+)%s+(%d+)%s+(%d+)")
		--
		if not ok then statusd.inform("mem_template", "--") return end
		--
		statusd.inform("mem_total", total)
		statusd.inform("mem_used", used)
		statusd.inform("mem_free", free)
		statusd.inform("mem_shared", shared)
		statusd.inform("mem_buffers", buffers)
		statusd.inform("mem_cached", cached)
		statusd.inform("mem_hused", tostring(used - cached - buffers))
		statusd.inform("mem_hfree", tostring(free + cached + buffers))
		--
		statusd.inform("mem_used_hint",
		used*100/total >= settings.used_alarm and "critical" or "important")
		statusd.inform("mem_hused_hint",
		(used - cached - buffers)*100/total >= settings.used_alarm and "critical" or "important")
		statusd.inform("mem_free_hint",
		free*100/total <= settings.free_alarm and "critical" or "important")
		statusd.inform("mem_hfree_hint",
		(free + cached + buffers)*100/total <= settings.free_alarm and "critical" or "important")
		--
		status = coroutine.yield()
	end
end

local function update_mem()
	statusd.popen_bgread("free -"..settings.units.."o", coroutine.wrap(show_meminfo))
	mem_timer:set(settings.update_interval, update_mem)
end

mem_timer = statusd.create_timer()
update_mem()

statusd_cpustat.lua

Fuer die Anzeige der CPU Auslastung in der Statuszeile.

CPU: %cpustat_user

-- $Id: statusd_cpustat.lua 80 2007-03-10 00:16:09Z tibi $

-- statusd_cpustat.lua -- CPU monitor for Ion3's statusbar

-- version : 0.3
-- date    : 2007-03-10
-- author  : Tibor Csögör <tibi@tiborius.net>

-- Shows the CPU utilization of the system similiar to top(1).
-- This script depends on the /proc filesystem and thus only works on Linux.
-- Tested with kernel 2.6.16.

-- Configuration:
-- The following placeholders (with a "cpustat_" prefix) can be used in the
-- statusbar template: `user', `nice', `idle', `system', `iowait', `irq',
-- `softirq' and `steal'.  In addition, `system_adj' sums up the last 5 fields.
-- For a compact output simply use the `cpustat' placeholder.

-- This software is in the public domain.

--------------------------------------------------------------------------------


local defaults = {
   update_interval = 1000, -- 1 second
}

local settings = table.join(statusd.get_config("cpustat"), defaults)

local last_stat, current_stat
local last_uptime, current_uptime = 0, 0
local first_run = true

function math.round(number, precision)
   local m = 10^(precision or 0)
   return math.floor((number*m)+(1/2)) / m
end

-- this function reads stats from /proc/stat and /proc/uptime and calculates the
-- CPU time used in the measurement interval
local function get_cpustat()
   local f1, f2, s, s2
   f1 = io.open('/proc/stat', 'r')
   f2 = io.open('/proc/uptime', 'r')
   if ((f1 == nil ) or (f2 == nil)) then return nil end
   s = f1:read("*l")
   s2 = f2:read("*l")
   f1:close()
   f2:close()

   last_uptime = current_uptime
   local tmp, tmp, up1, up2
   tmp, tmp, up1, up2 = string.find(s2, "(%d+)\.(%d+)%s%d")
   current_uptime = tonumber(up1 .. up2)
   local uptime_interv = current_uptime - last_uptime

   local t = {}
   for tmp in string.gfind(s, "%s+(%d+)") do
      table.insert(t, tonumber(tmp))
   end

   last_stat = current_stat
   current_stat = t
   if (first_run) then
      last_stat = t
      first_run = false
   end

   local c = {}
   for i = 1, table.getn(t) do
      table.insert(c, math.round(((current_stat[i] - last_stat[i])
				  / uptime_interv) * 100))
   end

   -- adjusted system CPU time (= system + iowait + irq + softirq + steal)
   table.insert(c, math.round((((current_stat[3] - last_stat[3]) +
				(current_stat[5] - last_stat[5]) +
				(current_stat[6] - last_stat[6]) +
				(current_stat[7] - last_stat[7]) +
				(current_stat[8] - last_stat[8]))
				  / uptime_interv) * 100))
   return c
end

local cpustat_timer = statusd.create_timer()

local function update_cpustat()
   local t = get_cpustat()
   if (t == nil) then return nil end
   statusd.inform("cpustat_user", t[1] .. "%")
   statusd.inform("cpustat_nice", t[2] .. "%")
   statusd.inform("cpustat_system", t[3] .. "%")
   statusd.inform("cpustat_system_adj", t[9] .. "%")
   statusd.inform("cpustat_idle", t[4] .. "%")
   statusd.inform("cpustat_iowait", t[5] .. "%")
   statusd.inform("cpustat_irq", t[6] .. "%")
   statusd.inform("cpustat_softirq", t[7] .. "%")
   statusd.inform("cpustat_steal", t[8] .. "%")
   statusd.inform("cpustat", string.format("%3d%% us,%3d%% sy,%3d%% ni",
					   t[1], t[9], t[2]))
   cpustat_timer:set(settings.update_interval, update_cpustat)
end

update_cpustat()

-- EOF

statusd_netmon.lua

Fuer die Anzeige des Netzwerk In/Out Puts in KB/s.

KB/s In: %netmon_kbsin Out: %netmon_kbsout

-- statusd_netmon.lua: monitor the speed of a network interface
--
-- Thanx to Tuomo for pointing out a problem in the previous script.
-- 
-- In case this doesn't work for someone, do let me know :)
--
-- Author
-- Sadrul Habib Chowdhury (Adil)
-- imadil at gmail dot com
--
-- Support for per-stat monitors and thresholds added by Jeremy
-- Hankins.
--
--
-- Monitor values available with this monitor:
--
-- netmon
-- netmon_kbsin
-- netmon_kbsout
-- netmon_avgin
-- netmon_avgout
-- netmon_count
--
-- To use the average values or the count you need show_avg and
-- show_count turned on, respectively.  If you want the default format
-- (which you get with %netmon) but with colors for important and
-- critical thresholds, try:
--
-- %netmon_kbsin/%netmon_kbsout (%netmon_avgin/%netmon_avgout)

if not statusd_netmon then
  statusd_netmon = {
      device = "eth0",
      show_avg = 1,       -- show average stat?
      avg_sec = 60,       -- default, shows average of 1 minute
      show_count = 0,     -- show tcp connection count?
      interval = 1*1000,  -- update every second

      -- Threshold information.  These values should likely be tweaked to
      -- suit local conditions.
      important = {
	kbsin = 1/10,
	kbsout = 1/10,
	avgin = 1/10,
	avgout = 1/10,
	count = 4,
      },

      critical = {
 	kbsin = 1200,
	kbsout = 120,
	avgin = 5,
	avgout = 5,
	count = 50,
    }
}
end

local timer = nil       -- the timer
local positions = {}    -- positions where the entries will be
local last = {}         -- the last readings
local history_in = {}   -- history to calculate the average
local history_out = {}
local total_in, total_out = 0, 0
local counter = 0       --

local settings = table.join(statusd.get_config("netmon"), statusd_netmon)

--
-- tokenize the string
--
local function tokenize(str)
    local ret = {}
    local i = 0
    local k = nil

    for k in string.gfind(str, '(%w+)') do
        ret[i] = k
        i = i + 1
    end
    return ret
end

-- 
-- get the connection count
--
local function get_connection_count()
    local f = io.popen('netstat -st', 'r')
    if not f then return nil end

    local output = f:read('*a')
    if string.len(output) == 0 then return nil end

    local s, e, connections =
	string.find(output, '%s+(%d+)%s+connections established%s')
    f:close()
    return tonumber(connections)
end

--
-- calculate the average
--
local function calc_avg(lin, lout)
    if counter == settings.avg_sec then
        counter = 0
    end

    total_in = total_in - history_in[counter] + lin
    history_in[counter] = lin

    total_out = total_out - history_out[counter] + lout
    history_out[counter] = lout

    counter = counter + 1

    return total_in/settings.avg_sec, total_out/settings.avg_sec
end

--
-- parse the information
--
local function parse_netmon_info()
    local s
    local lin, lout

    for s in io.lines('/proc/net/dev') do
        local f = string.find(s, settings.device)
        if f then
            local t = tokenize(s)
            return t[positions[0]], t[positions[1]]
       end
    end
    return nil, nil
end

--
-- Return a hint value for the given meter
--
local function get_hint(meter, val)
    local hint = "normal"
    local crit = settings.critical[meter]
    local imp = settings.important[meter]
    if crit and val > crit then
	hint = "critical"
    elseif imp and val > imp then
	hint = "important"
    end
    return hint
end

--
-- update the netmon monitor
--
local function update_netmon_info()
    local s
    local lin, lout

    local function fmt(num)
	return(string.format("%.1fK", num))
    end

    lin, lout = parse_netmon_info()
    if not lin or not lout then
	-- you should never reach here
        statusd.inform("netmon", "oops")
	statusd.inform("netmon_hint", "critical")
        return
    end

    last[0], lin = lin, lin - last[0]
    last[1], lout = lout, lout - last[1]

    local kbsin = lin/1024
    local kbsout = lout/1024

    local output = string.format("%.1fK/%.1fK", kbsin, kbsout)

    if settings.show_avg == 1 then
	local avgin, avgout = calc_avg(lin/1024, lout/1024)
        output = output .. string.format(" (%.1fK/%.1fK)", avgin, avgout)

	statusd.inform("netmon_avgin", fmt(avgin))
	statusd.inform("netmon_avgin_hint",
		       get_hint("avgin", avgin))
	statusd.inform("netmon_avgout", fmt(avgout))
	statusd.inform("netmon_avgout_hint",
		       get_hint("avgout", avgout))
    end
    if settings.show_count == 1 then
	local count = get_connection_count()
	if count then
	    output = "[" .. tostring(count) .. "] " .. output

	    statusd.inform("netmon_count", tostring(count))
	    statusd.inform("netmon_count_hint",
			   get_hint("count", count))
	else
	    output = "[?] " .. output
	    statusd.inform("netmon_count", "?")
	    statusd.inform("netmon_count_hint", "critical")
	end
    end

    statusd.inform("netmon_kbsin", fmt(kbsin))
    statusd.inform("netmon_kbsin_hint",
		   get_hint("kbsin", kbsin))
    statusd.inform("netmon_kbsout", fmt(kbsout))
    statusd.inform("netmon_kbsout_hint",
		   get_hint("kbsout", kbsout))
    statusd.inform("netmon", output)

    timer:set(settings.interval, update_netmon_info)
end

--
-- is everything ok to begin with?
--
local function sanity_check()
    local f = io.open('/proc/net/dev', 'r')
    local e

    if not f then
        return false
    end

    local s = f:read('*line')
    s = f:read('*line')         -- the second line, which should give
                                -- us the positions of the info we seek

    local t = tokenize(s)
    local n = table.getn(t)
    local i = 0

    for i = 0,n do
        if t[i] == "bytes" then
            positions[0] = i
            break
        end
    end

    i = positions[0] + 1

    for i=i,n do
        if t[i] == "bytes" then
            positions[1] = i
            break
        end
    end

    if not positions[0] or not positions[1] then
        return false
    end

    s = f:read('*a')        -- read the whole file
    if not string.find(s, settings.device) then
        return false        -- the device does not exist
    end
    
    return true
end

--
-- start the timer
-- 
local function init_netmon_monitor()
    if sanity_check() then
        timer = statusd.create_timer()
        last[0], last[1] = parse_netmon_info()
        
        if settings.show_avg == 1 then
            for i=0,settings.avg_sec-1 do
                history_in[i], history_out[i] = 0, 0
            end
        end
        
        statusd.inform("netmon_template", "xxxxxxxxxxxxxxxxxxxxxxx")
        update_netmon_info()
    else
        statusd.inform("netmon", "oops")
        statusd.inform("netmon_hint", "critical")
    end
end

init_netmon_monitor()

cfg_menu.lua

Hier kann das Menue entsprechend angepasst werden.

--
-- Menu module configuration. 
-- 
-- Only bindings that are effect in menus are configured here. 
-- See ion-menus.lua for menu definitions and ion-bindings.lua
-- for bindings to display menus.
--


defbindings("WMenu", {
    bdoc("Close the menu."),
    kpress("Escape", "WMenu.cancel(_)"),
    kpress("Control+G", "WMenu.cancel(_)"),
    kpress("Control+C", "WMenu.cancel(_)"),
    kpress("Left", "WMenu.cancel(_)"),
    
    bdoc("Activate current menu entry."),
    kpress("Return",  "WMenu.finish(_)"),
    kpress("KP_Enter", "WMenu.finish(_)"),
    kpress("Control+M", "WMenu.finish(_)"),
    kpress("Right", "WMenu.finish(_)"),
    
    bdoc("Select next/previous menu entry."),
    kpress("Control+N", "WMenu.select_next(_)"),
    kpress("Control+P", "WMenu.select_prev(_)"),
    kpress("Up", "WMenu.select_prev(_)"),
    kpress("Down", "WMenu.select_next(_)"),
    
    bdoc("Clear the menu's typeahead find buffer."),
    kpress("BackSpace", "WMenu.typeahead_clear(_)"),
})

Links

• Homepage
• Fun with the Ion window manager
• Ion, the efficient window manager
• Bericht auf LinuxUser - Fliesenleger
• Ion Newsgroup

---

zurück zum Desktop