Dies ist eine reine Textkopie der Manpage von zypper um sie online anzuschauen. Anwendbar für zypper 1.9.3
|
zypper(8) System Tools zypper(8)
NAME
zypper - Command-line interface to ZYpp system management library (libzypp)
SYNTAX
zypper [--global-opts] <command> [--command-opts] [command-arguments]
zypper help [command]
DESCRIPTION
zypper is a command-line interface to ZYpp system management library. It can be used to install,
update, remove software, manage repositories, perform various queries, and more.
CONCEPTS
Most of the following concepts are common for all applications based on the libzypp package man-
agement library, but there are some zypper specifics.
Repositories
Libzypp works with package metadata, that is information about packages and their relations
extracted from RPM packages and other data like patch information, pattern definitions, etc.
These data are stored together with the RPM files in folders called repositories. Repositories
can be placed on various media like an HTTP or FTP server, DVD, or a folder on a local disc.
There is a special set of commands in zypper intented to manipulate repositories. Also many com-
mands and options take a repository as an arugment. See section COMMANDS, subsection Repository
Management for more details.
Resource Identfiers (URI)
To specify locations of repositories or other resources (RPM files, .repo files) you can use any
type of URIs supported by libzypp. See http://en.opensuse.org/openSUSE:Libzypp_URIs for a com-
plete list and usage examples.
Zypper also accepts special URIs identifying openSUSE Build Service (OBS) repositories in the
addrepo command. These URIs have the form of obs://<project>/[platform], where project is the
name of the OBS project and platform is the target platform (OS) for which the repository is
intended. For example: obs://server:http/openSUSE_11.3.
If platform is omitted, zypper.conf's obs.platform value is used. See also other options in the
[obs] section of zypper.conf.
In addition to these URIs you can use plain directory and file paths in which case zypper auto-
matically treats them as dir:/path URIs.
Refresh
Refreshing a repository means downloading metadata of packages from the medium (if needed), stor-
ing it in local cache (typically under /var/cache/zypp/raw/<alias> directory) and preparsing the
metadata into .solv files (building the solv cache), typically under
/var/cache/zypp/solv/<alias>.
The metadata get refreshed either automatically or on user request. An automatic refresh takes
place right before reading metadata from the database if the auto-refresh is enabled for the
repository and the metada is reported to be out of date. If the auto-refresh is disabled, the
repository will only be refreshed on user request. You can request a refresh by calling zypper
refresh (see the documentation of the refresh command for details).
The repository metadata are checked for changes before actually doing the refresh. A change is
detected by downloading one or two metadata index files (small files) and comparing the checksums
of the cached ones and the remote ones. If the files differ, the repository is out of date and
will be refreshed.
To delay the up-to-date check (and thus the automatic refresh) for a certain number of minutes,
edit the value of the repo.refresh.delay attribute of ZYpp config file (/etc/zypp/zypp.conf).
This means, zypper will not even try to download and check the index files, and you will be able
to use zypper for operations like search or info without internet access or root privileges.
Services
Services are one level above repositories and serve to manage repositories or to do some special
tasks. Libzypp currently supports only one type of services, the Repository Index Service (RIS).
Repository Index Service (RIS) is a special type of repository which contains a list of other
repositories. This list can be generated dynamically by the server according to some URI parame-
ters or user name, or can be static. Once such service is added to your system, zypper takes care
of adding, modifying, or removing these repositories on your system to reflect the current list.
See section Service Management and http://old-en.opensuse.org/Standards/Repository_Index_Service
for more details.
Package Types
zypper works with several types of resource objects, called resolvables. A resolvable is a pack-
age, patch, pattern, or a product.
package - an ordinary RPM package.
patch - update of one or more packages. A patch can include special scripts and messages to be
run or shown during installation of the update.
pattern - group of packages required or recommended to install some functionality.
product - group of packages which are necessary to install a product.
srcpackage - source code package (.src.rpm). This type works in search and install commands.
Throughout this manual we will refer to resolvables simply as packages and to resolvable types as
package types. These type names can be used as arguments of --type option in several commands
like install, info, or search.
Package Dependencies
Software packages depend on each other in various ways. Packages usually require or recommend
other packages, they can declare that they conflict with other packages, etc. Packages can also
depend on specific hardware. See http://old-en.opensuse.org/Software_Management/Dependencies for
more information. Zypper uses a dependency solver to find out what packages need to be installed
to satisfy the user's request.
COMMANDS
zypper provides a number of commands. Each command accepts the options listed in the GLOBAL
OPTIONS section. These options must be specified before the command name. In addition, many com-
mands have specific options, which are listed in this section. These command-specific options
must be specified after the name of the command and before any of the command arguments.
General Commands
help [command]
Shows help texts. If invoked without any argument (just ´zypper´ or ´zypper help´), zypper
displays global help text which lists all available global options and commands (except
those provided only for compatibility with rug).
If invoked with a command name argument, zypper displays help for the specified command,
if such command exists. Long as well as short variants of the command names can be used.
For your convenience, zypper help can be invoked in any of the following ways:
$ zypper help [command]
$ zypper -h|--help [command]
$ zypper [command] -h|--help
shell (sh)
Starts a shell for entering multiple commands in one session. Exit the shell using
"exit", "quit", or Ctrl-D.
The shell support is not complete so expect bugs there. However, there's no urgent need to
use the shell since libzypp became so fast thanks to the SAT solver and its tools (open-
SUSE 11.0), but still, you're welcome to experiment with it.
Package Management Commands
info (if) [options] <name> ...
Displays detailed information about the specified packages.
For each specified package, zypper finds the best available version in defined reposito-
ries and shows information for this package.
-r, --repo <alias|name|#|URI>
Work only with the repository specified by the alias, name, number or URI. This option can
be used multiple times.
-t, --type <type>
Type of package (default: package). See section Package Types for list of available pack-
age types.
--requires
Show also symbols required and pre-required by the package. Available for package and
patch type only.
--recommends
Show also symbols recommended by the package. Available for package and patch type only.
Examples:
Show information about package 'workrave':
$ zypper info workrave
Show information about patch 'libzypp':
$ zypper info -t patch libzypp
Show information about pattern 'lamp_server':
$ zypper info -t pattern lamp_server
install (in) [options] <name|capability|rpm_file_uri> ...
Install or update packages.
The packages can be selected by their name or by a capability they provide.
Capability is: NAME, or "NAME[.ARCH][OP<EDITION>]", where ARCH is architecture code, OP is
<, <=, =, >=, or > and EDITION is VERSION[-RELEASE]. For example: zypper=0.8.8-2.
The NAME component of a capability is not only a package name but any symbol provided by
packages: /bin/vi, libcurl.so.3, perl(Time::ParseDate). Just remember to quote to protect
the special characters from the shell, for example: zypper\>0.8.10 or 'zypper>0.8.10'
If EDITION is not specified, the newest installable version will be installed. This also
means that if the package is already installed and newer versions are available, it will
get upgraded to the newest installable version.
If ARCH is not specified, or the last dot of the capability name string is not followed by
known architecture, the solver will treat the whole string as a capability name. If the
ARCH is known, the solver will select a package matching that architecture and complain if
such package cannot be found.
Zypper will report packages that it cannot find. Further, in interactive mode, zypper pro-
ceeds with installation of the rest of requested packages, and it will abort immediately
in non-interactive mode. In both cases zypper returns ZYPPER_EXIT_INF_CAP_NOT_FOUND after
finishing the operation.
Zypper is also able to install plain RPM files while trying to satisfy their dependencies
using packages from defined repositories. You can install a plain RPM file by specifying
its location in the install command arguments either as a local path or an URI. E.g.:
$ zypper install ~/rpms/foo.rpm http://some.site/bar.rpm
Zypper will download the files into its cache directory (/var/cache/zypper/RPMS), add this
directory as a temporary plaindir repository and mark the respective packages for instal-
lation.
In the install command, you can specify also packages you wish to remove in addition to
the packages you wish to install, by prepending their names by a '-' or '~' character. For
example:
$ zypper install vim -emacs
$ zypper remove emacs +vim
will both install vim and remove emacs. Note that if you choose to use '-' with the first
package you specify, you need to write '--' before it to prevent its interpretation as a
command option.
$ zypper install -- -boring-game great-game great-game-manual
-r, --repo <alias|name|#|URI>
Work only with the repository specified by the alias, name, number or URI. This option can
be used multiple times.
-t, --type <type>
Type of package to install (default: package). See section Package Types for list of
available package types.
If pattern is specified, and the pattern is not yet installed, all packages required and
recommended by the pattern will be installed. A pattern is considered installed if all
the packages and patterns it requires are installed. Thus a pattern can be evalueated as
installed even if you do not install the pattern itself, but rather the packages it
requries. Use zypper search -t pattern [name] to look for available patterns and zypper
info -t pattern <name> to list its contents.
If patch is specified, zypper will install and/or remove packages to satisfy specified
patch. This is a way to ensure that specific bug fix is installed. Like patterns, patches
can also be evaluated as installed by installing the packages needed to satisfy the patch.
Use zypper list-patches to look for available needed patches and zypper info -t patch
<name> to display detailed information about a patch.
If product is specified, zypper ensures all packages required by the product are
installed. Use zypper se -t product [name] to look for available products and zypper info
-t product <name> to display detailed information about a product.
-n, --name
Select packages by their name, don't try to select by capabilities.
-f, --force
Install even if the item is already installed (reinstall), downgraded or changes vendor or
architecture.
--oldpackage
Allow to replace a newer item with an older one. Handy if you are doing a rollback. Unlike
--force it will not enforce a reinstall, if the item is already installed with the
requested version.
--from <alias|name|#|URI>
Select packages from specified repository. If strings specified as arguments to the
install command match packages in repositories specified in this option, they will be
marked for installation. This option currently implies --name, but allows using wildcards
for specifying packages.
-C, --capability
Select packages by capabilities.
-l, --auto-agree-with-licenses
Automatically say 'yes' to third party license confirmation prompt. By using this option,
you choose to agree with licenses of all third-party software this command will install.
This option is particularly useful for administators installing the same set of packages
on multiple machines (by an automated process) and have the licenses confirmed before.
--debug-solver
Create solver test case for debugging. Use this option, if you think the dependencies were
not solved all right and attach the resulting /var/log/zypper.solverTestCase directory to
your bug report. To use this option, simply add it to the problematic install or remove
command.
--no-recommends
By default, zypper installs also packages recommended by the requested ones. This option
causes the recomended packages to be ignored and only the required ones to be installed.
-R, --no-force-resolution
Do not force the solver to find a solution. Instead, report dependency problem and prompt
the user to resolve it manually.
--force-resolution
Force the solver to find a solution, even if it would mean removing all packages with
unfulfilled requirements.
The default behavior is 'force' in the interactive mode and 'no-force' in the non-interac-
tive mode. If this option is specified, it takes the preference.
-D, --dry-run
Test the installation, do not actually install any package. This option will add the
--test option to the rpm commands run by the install command.
Download-and-install mode options:
-d, --download-only
Only download the packages for later installation.
--download-in-advance
First download all packages, then start installing.
--download-in-heaps
(Not yet implemented, currently the same as --download-in-advance). Download a minimal
set of packages that can be installed without leaving the system in broken state, and
install them. Then download and install another heap until all are installed. This helps
to keep the system in consistent state without the need to download all package in
advance, which combines the advantages of --download-in-advance and --download-as-needed.
This is the default mode.
--download-as-needed
Download one package, install it immediately, and continue with the rest until all are
installed.
--download <mode>
Use the specified download-and-install mode. Available modes are: only, in-advance, in-
heaps, as-needed. See corresponding --download-<mode> options for their description.
More examples:
Install lamp_server pattern:
$ zypper install -t pattern lamp_server
Install GhostScript viewer, but ignore recommended packages:
$ zypper install --no-recommends gv
Install version 2.0.6 of virtualbox-ose package (any of the following):
$ zypper install virtualbox-ose-2.0.6
$ zypper install virtualbox-ose=2.0.6
$ zypper install virtualbox-ose = 2.0.6
source-install (si) <name> ...
Install specified source packages and their build dependencies. If the name of a binary
package is given, the coresponding source package is looked up and installed instead.
This command will try to find the newest available versions of the source packages and use
rpm -i to install them and the packages that are required to build the source package.
Note that the source packages must be available in repositories you are using. You can
check whether a repository contains any source packages using the following command:
$ zypper search -t srcpackage -r <alias|name|#|URI>
-d, --build-deps-only
Install only build dependencies of specified packages.
-D, --no-build-deps
Don't install build dependencies.
-r, --repo <alias|name|#|URI>
Work only with the repository specified by the alias, name, number, or URI. This option
can be used multiple times.
--download-only
Only download the packages, do not install.
Examples:
Install build dependencies of dbus-1 source package:
$ zypper si -d dbus-1
verify (ve) [options]
Check whether dependencies of installed packages are satisfied.
In case that any dependency problems are found, zypper suggests packages to install or
remove to fix them.
--no-recommends
By default, zypper installs also packages recommended by the requested ones (the ones
needed to fix broken dependencies in this case). This option causes the recomended pack-
ages to be ignored and only the required ones to be installed.
-D, --dry-run
Test the repair, do not actually do anything to the system.
-r, --repo <alias|name|#|URI>
Work only with the repository specified by the alias, name, number, or URI. This option
can be used multiple times.
--debug-solver
Create solver test case for debugging. See the install command for details.
install-new-recommends (inr) [options]
Install newly added packages recommended by already installed ones. This can typically be
used to install language packages recently added to repositories or drivers for newly
added hardware.
-r, --repo <alias|name|#|URI>
Work only with the repository specified by the alias, name, number, or URI. This option
can be used multiple times.
-D, --dry-run
Test the installation, do not actually install anything.
--debug-solver
Create solver test case for debugging. See the install command for details.
This command also accepts the download-and-install mode options described
in the install command description.
remove (rm) [options] <name> ...
remove (rm) [options] --capability <capability> ...
Remove (uninstall) packages.
The packages can be selected by their name or by a capability they provide. For details
on package selection see the install command description.
-r, --repo <alias|name|#|URI>
Work only with the repository specified by the alias, name, number, or URI. This option
can be used multiple times.
-t, --type <type>
Type of package (default: package). See section Package Types for list of available pack-
age types.
Since patches are not installed in sense of copying files or recording a database entry,
they cannot be uninstalled, even though zypper shows them as installed. The installed sta-
tus is determined solely based on the installed status of its required dependencies. If
these dependencies are satisified, the patch is rendered installed.
Uninstallation of patterns is currently not implemented.
-n, --name
Select packages by their name (default).
-C, --capability
Select packages by capabilities.
--debug-solver
Create solver test case for debugging. See the install command for details.
-R, --no-force-resolution
Do not force the solver to find a solution. Instead, report dependency problem and prompt
the user to resolve it manually.
--force-resolution
Force the solver to find a solution, even if it would mean removing all packages with
unfulfilled requirements.
The default behavior is 'force' in the interactive mode and 'no-force' in the non-interac-
tive mode. If this option is specified, it takes the preference.
-u, --clean-deps
Automatically remove dependencies which become unneeded after removal of requested pack-
ages.
-U, --no-clean-deps
No automatic removal of unneeded dependencies.
-D, --dry-run
Test the removal of packages, do not actually remove anything. This option will add the
--test option to the rpm commands run by the remove command.
Update Management Commands
list-updates (lu) [options]
List available updates.
This command will list only installable updates, i.e. updates which have no dependency
problems, or which do not change package vendor. This list is what the update command will
propose to install. To list all packages for which newer version are available, use --all
option.
-t, --type <type>
Type of package (default: package). See section Package Types for list of available pack-
age types.
If patch is specified, zypper acts as if the list-patches command was executed.
-r, --repo <alias|name|#|URI>
Work only with the repository specified by the alias, name, number, or URI. This option
can be used multiple times.
-a, --all
List all packages for which newer versions are available, regardles whether they are
installable or not.
--best-effort
See the update command for description.
update (up) [options] [packagename] ...
Update installed packages with newer versions, where possible.
This command will not update packages which would require change of package vendor unless
the vendor is specified in /etc/zypp/vendors.d, or which would require manual resolution
of problems with dependencies. Such non-installable updates will then be listed in sepa-
rate section of the summary as "The following package updates will NOT be installed:".
To update individual packages, specify one or more package names. You can use the '*' and
'?' wildcard characters in the package names to specify multiple packages matching the
pattern.
-t, --type <type>
Type of package (default: package). See section Package Types for list of available pack-
age types.
If patch is specified, zypper acts as if the patche command was executed.
-r, --repo <alias|name|#|URI>
Work only with the repository specified by the alias, name, number, or URI. This option
can be used multiple times.
--skip-interactive
This will skip interactive patches, that is, those that need reboot, contain a message, or
update a package whose license needs to be confirmed.
-l, --auto-agree-with-licenses
Automatically say 'yes' to third party license confirmation prompt. By using this option,
you choose to agree with licenses of all third-party software this command will install.
This option is particularly useful for administators installing the same set of packages
on multiple machines (by an automated process) and have the licenses confirmed before.
--debug-solver
Create solver test case for debugging. See the install command for details.
--no-recommends
By default, zypper installs also packages recommended by the requested ones. This option
causes the recomended packages to be ignored and only the required ones to be installed.
-R, --no-force-resolution
Do not force the solver to find a solution. Instead, report dependency problem and prompt
the user to resolve it manually.
--force-resolution
Force the solver to find a solution, even if it would mean removing all packages with
unfulfilled requirements.
The default behavior is 'no-force'. If this option is specified, it takes the preference.
-D, --dry-run
Test the update, do not actually install or update any package. This option will add the
--test option to the rpm commands run by the update command.
--best-effort
Do a 'best effort' approach to update. This method does not explicitly select packages
with best version and architecture, but instead requests installation of a package with
higher version than the installed one and leaves the rest on the dependency solver. This
method is always used for packages, and is optional for products and patterns. It is not
applicable to patches.
This command also accepts the download-and-install mode options described
in the install command description.
list-patches (lp) [options]
List all available needed patches.
This command is similar to 'zypper list-updates -t patch'.
Note that since the arguments of some of the following options are not required, they must
be specified using '=' instead of a space.
-b, --bugzilla[=#]
List available needed patches for all Bugzilla issues, or issues whose number matches the
given string.
--cve[=#]
List available needed patches for all CVE issues, or issues whose number matches the given
string.
-g, --category <category>
List available patches in the specified category.
--issues[=string]
Look for issues whose number, summary, or description matches the specified string. Issues
found by number are displayed separately from those found by descriptions. In the latter
case, use zypper patch-info <patchname> to get information about issues the patch fixes.
-a, --all
By default, only patches that are relevant and needed on your system are listed. This
option causes all available released patches to be listed. This option can be combined
with all the rest of the list-updates command options.
-r, --repo <alias|name|#|URI>
Work only with the repository specified by the alias, name, number, or URI. This option
can be used multiple times.
patch-check (pchk)
Check for patches. Displays a count of applicable patches and how many of them have the
security category.
See also the EXIT CODES section for details on exit status of 0, 100, and 101 returned by this
command.
-r, --repo <alias|name|#|URI>
Check for patches only in the repository specified by the alias, name, number, or URI.
This option can be used multiple times.
patch [options]
Install all available needed patches.
If there are patches that affect the package management itself, those will be installed
first and you will be asked to run the patch command again.
This command is similar to 'zypper update -t patch'.
-b, --bugzilla <#>
Install patch fixing a Bugzilla issue specified by number. Use list-patches --bugzilla
command to get a list of available needed patches for specific issues.
--cve <#>
Install patch fixing a MITRE's CVE issue specified by number. Use list-patches --cve com-
mand to get a list of available needed patches for specific issues.
-g, --category <category>
Install all patches in the specified category. Use list-patches --category command to get
a list of available patches for a specific category.
-r, --repo <alias|name|#|URI>
Work only with the repository specified by the alias, name, number, or URI. This option
can be used multiple times.
--skip-interactive
Skip interactive patches.
--with-interactive
Avoid skipping of interactive patches when in non-interactive mode.
-l, --auto-agree-with-licenses
See the update command for description of this option.
--no-recommends
By default, zypper installs also packages recommended by the requested ones. This option
causes the recomended packages to be ignored and only the required ones to be installed.
--debug-solver
Create test case for debugging of dependency resolver.
-D, --dry-run
Test the update, do not actually update.
This command also accepts the download-and-install mode options described
in the install command description.
dist-upgrade (dup) [options]
Perform a distribution upgrade. This command applies the state of (specified) repositories
onto the system; upgrades (or even downgrades) installed packages to versions found in
repositories, removes packages that are no longer in the repositories and pose a depen-
dency problem for the upgrade, handles package splits and renames, etc.
If no repositories are specified via --from or --repo options, zypper will do the upgrade
with all defined repositories. This can be a problem if the system contains conflicting
repositories, like repositories for two different distribution releases. This often hap-
pens if one forgets to remove an older release repository after adding a new one, say
openSUSE 11.1 and openSUSE 11.2.
To avoid the above trouble, you can specify the repositories from which to do the upgrade
using the --from or --repo options. The difference between these two is that when --repo
is used, zypper uses only the specified repositories, while with --from zypper can also
use the rest of the enabled repositories to satisfy package dependencies.
--from <alias|name|#|URI>
Restricts the upgrade to the specified repositories (the option can be used multiple
times) only, but can satisfy dependencies also from the rest of enabled repositories.
-r, --repo <alias|name|#|URI>
Work only with the repository specified by the alias, name, number, or URI. This option
can be used multiple times.
-l, --auto-agree-with-licenses
Automatically say 'yes' to third party license confirmation prompt. By using this option,
you choose to agree with licenses of all third-party software this command will install.
This option is particularly useful for administators installing the same set of packages
on multiple machines (by an automated process) and have the licenses confirmed before.
--no-recommends
By default, zypper installs also packages recommended by the requested ones. This option
causes the recomended packages to be ignored and only the required ones to be installed.
--debug-solver
Create solver test case for debugging. See the install command for details.
-D, --dry-run
Test the upgrade, do not actually install or update any package. This option will add the
--test option to the rpm commands run by the dist-upgrade command.
This command also accepts the download-and-install mode options described
in the install command description.
Examples:
Upgrade the system using 'factory' and 'packman' repository:
$ zypper install zypper libzypp
$ zypper dup --from factory --from packman
Query Commands
search (se) [options] [querystring|capability] ...
Search for packages matching any of the given strings. * (any substring) and ? (any char-
acter) wildcards can also be used within search strings. If the search string is enclosed
in '/', for example $ zypper se '/^k.*e$/', it's interpreted as a regular expression.
It's also possible to specify a capability like "NAME[.ARCH][OP<EDITION>]", where ARCH is
an architecture code, OP is <, <=, =, >=, or > and EDITION is VERSION[-RELEASE]. Also
quote here to protect the special characters from the shell, for example: $ zypper se
'libgcc>4.6'.
Results of search are printed in a table with following columns: S (status), Catalog, Type
(type of package), Name, Version, Arch (architecture). The status column can contain the
following values: i - installed, v - another version installed, or an empty space for nei-
ther of the former cases.
The 'v' status is only shown if the version or the repository matters (--details or --repo
is used), and the installed version differs from the one listed or is from a repository
other than specified.
This command accepts the following options:
--match-substrings
Matches for search strings may be partial words (default).
--match-words
Matches for search strings may only be whole words.
--match-exact
Searches for an exact name of the package.
--provides
Search for packages which provide the search strings. A search string here might be also
any symbol provided by a package like /bin/vi, libcurl.so.3, perl(Time::ParseDate),
web_browser, e.g. search for the package which provides the shell: zypper se --provides
/bin/sh
--requires
Search for packages which require the search strings. A search string here might be also
any symbol required by a package, e.g. all packages which require the snapper library:
zypper se --requires libsnapper.so
--recommends
Search for packages which recommend the search strings, e.g. zypper se --recommends
usb_modeswitch
--suggests
Search for packages which suggest the search strings, e.g. zypper se --suggests acroread
--conflicts
Search for packages conflicting with the search strings, e.g. zypper se --conflicts
aspell-hi
--obsoletes
Search for packages wich obsolete the search strings, e.g. zypper se --obsoletes efence
-n, --name
Useful together with dependency options, otherwise searching in package name is default.
-f, --file-list
Search in file list of packages.
-d, --search-descriptions
Search also in summaries and descriptions.
-C, --case-sensitive
Perform case-sensitive search.
-i, --installed-only
Show only packages that are already installed.
-u, --uninstalled-only
Show only packages that are not currently installed.
-t, --type <type>
Search only for packages of specified type. See section Package Types for list of avail-
able package types. Multiple -t option are allowed.
See also the type-specific query commands like packages, patterns, etc.
-r, --repo <alias|name|#|URI>
Work only with the repository specified by the alias, name, number, or URI. This option
can be used multiple times.
--sort-by-name
Sort packages by name (default).
--sort-by-repo
Sort packages by catalog, not by name.
-s, --details
Show all available versions of found packages, each version in each repository on a sepa-
rate line.
-v, --verbose
Like --details with additional information where the search has matched (useful when
searching for dependencies, e.g. --provides).
Examples:
Search for YaST packages (quote the string to prevent the shell from expanding the wild-
card):
$ zypper se 'yast*'
Show all available versions of package 'kernel-default':
$ zypper se -s --match-exact kernel-default
Look for RSI acronym (case-sensitively), also in summaries and descriptions:
$ zypper se -dC --match-words RSI
packages (pa) [options] [repository] ...
List all available packages or all packages from specified repositories (similar to zypper
search -s -t package). Also allows the options --orphaned, --suggested, --recommended and
--unneeded to get corresponding lists of packages.
-r, --repo <alias|name|#|URI>
Just another means to specify repositories.
-i, --installed-only
Show only installed packages.
-u, --uninstalled-only
Show only packages which are not installed.
-o, --orphaned
Show packages which are orphaned (without repository).
-s, --suggested
Show packages which are suggested.
-r, --recommended
Show packages which are recommeded.
-n, --unneeded
Show packages which are unneeded.
patches (pch) [options] [repository] ...
List all available patches from specified repositories, including those not needed. Simi-
lar to zypper search -s -t patch.
-r, --repo <alias|name|#|URI>
Just another means to specify repositories.
patterns (pt) [options] [repository] ...
List all available patterns or all patterns from specified repositories. Similar to zyp-
per search -s -t pattern.
-r, --repo <alias|name|#|URI>
Just another means to specify repositories.
-i, --installed-only
Show only installed patterns.
-u, --uninstalled-only
Show only patterns which are not installed.
products (pd) [options] [repository] ...
List all available products or all products from specified repositories. Similar to zyp-
per search -s -t product, but shows also the type of the product (base, add-on).
-r, --repo <alias|name|#|URI>
Just another means to specify repositories.
-i, --installed-only
Show only installed products.
-u, --uninstalled-only
Show only products which are not installed.
what-provides (wp) <capability>
List all packages providing the specified capability. See also the install command for
hint about capabilities.
what-provides is replaced by the search command, which now has the functionality to search
for dependencies (and allows various options).
The command line is automatically transformed to the appropriate search, e.g.:
$ zypper what-provides 'zypper>1.6' to $ zypper se --provides --match-exact 'zypper>1.6'
Repository Management
Zypper is able to work with YaST, RPM-MD (yum) software repositories, and plain directories con-
taining .rpm files.
Repositories are primarily identified using their URI or alias. Alias serves as a shorthand for
the long URI or name of the repository. The name of the repository should briefly describe the
repository and is shown to the user in tables and messages. The name is not required, and if not
known, the alias is shown instead. The alias is required and uniquely identifies the repository
on the system.
The alias, name, URI, or the number from zypper repos list can be used to specify a repository as
an argument of various zypper commands and options like refresh, --repo, or --from.
Supported URI formats:
CD or DVD drive
Optionally with devices list for probing.
cd:///
dvd:/subdir?devices=/dev/sr0,/dev/sr1
FTP/HTTP/HTTPS directory tree
The ftp URL scheme supports absolute and relative paths to the default ftp server direc-
tory (RFC1738, Section 3.2.2). To use an absolute path, you have to prepend the path with
an additional slash, what results in a "/%2f" combination (second "/" encoded to "%2f") at
the begin of the URL path. This is important, especially in user authenticated ftp, where
the users home is usually the default directory of the server (except when the server
chroots into the users home directory).
Explicit proxy settings may be passed via optional parameters proxy, proxyport, proxyuser
and proxypass.
HTTP authentication methods to use can be defined as comma separated list via optional
parameter auth. Valid methods are e.g. 'basic', 'digest', 'ntlm', 'negotiate'. Note, that
this list depends on the list of methods supported by the curl library.
ftp://user:pass@server/path/to/media/dir
ftp://user:pass@server/%2fhome/user/path/to/media/dir
http://user:pass@server/path
https://user:pass@server/path?proxy=foo&proxyuser=me&proxypass=pw
Disk volume (partition)
Mandatory device parameter specifying the name of the block device to mount. The name of
the optional filesystem defaults to "auto".
hd:/subdir?device=/dev/sda1&filesystem=reiserfs
Local directory tree
dir:/directory/name
Media in an ISO image (loopback mounted)
Mandatory iso parameter specifying the name of the iso file. Optional url parameter speci-
fying the URL to the directory containing the iso file. Optional mnt parameter specifying
the preferred attach point for the source media url. Optional filesystem name of the
filesystem used in the iso file. Defaults to "auto".
iso:/?iso=CD1.iso&url=nfs://server/path/to/media
iso:/?iso=CD1.iso&url=hd:/?device=/dev/hda
iso:/subdir?iso=DVD1.iso&url=nfs://nfs-server/directory&mnt=/nfs/attach/point&filesys-
tem=udf
NFS exported directory tree
To use NFSv4 either use schema tnfsv4:// or pass an optional parameter type=nfs4. Addi-
tional mountoptions can be passed as comma separated list. Defaults to "ro".
nfs://nfs-server/exported/path
nfs://nfs-server/exported/path?mountoptions=ro&type=nfs4
nfs4://nfs-server/exported/path?mountoptions=ro
CIFS/SMB directory tree
There is no difference between cifs and smb scheme (any more). In both cases the cifs
filesystem is used. Additional mountoptions can be passed as comma separated list.
Defaults to "ro,guest". Specify "noguest" to turn off "guest". This is necessary if Samba
is configured to reject guest connections.
Optional workgroup or domain parameter set the name of the workgroup. As alternative to
passing username:password in the URI authority the parameters user and pass can be used.
smb://servername/share/path/on/the/share
cifs://usenr:passw@servername/share/path/on/the/share?mountoptions=ro,noguest
cifs://usern:passw@servername/share/path/on/the/share?workgroup=mygroup
cifs://servername/share/path/on/the/share?user=usern&pass=passw
Apart from the above, repositories have several other properties which can be set using the com-
mands described in this section below, or by manually editing the repository definition files
(.repo files, see section FILES).
addrepo (ar) [options] <URI> <alias>
addrepo (ar) [options] <FILE.repo>
Add a new repository specified by URI and assign specified alias to it or specify URI to a
.repo file.
Newly added repositories have auto-refresh disabled by default (except for repositories
imported from a .repo, having the auto-refresh enabled). To enable auto-refresh, use the
--refresh option of the modifyrepo command.
Also, this command does not automatically refresh the newly added repositories. The
repositories will get refreshed when used for the first time, or you can use the refresh
command after finishing your modifications with *repo commands. See also METADATA REFRESH
POLICY section for more details.
-r, --repo <file.repo>
Read URI and alias from specified .repo file
-t, --type <type>
Type of repository (yast2, rpm-md, or plaindir). There are several aliases defined for
these types: yast2 - susetags, yast, YaST, YaST2, YAST; rpm-md - repomd, rpmmd, yum, YUM;
plaindir - Plaindir.
-d, --disable
Add the repository as disabled. Repositories are added as enabled by default.
-c, --check
Probe given URI.
-C, --nocheck
Don't probe URI, probe later during refresh.
-n, --name
Specify descriptive name for the repository.
-k, --keep-packages
Enable RPM files caching for the repository.
-K, --no-keep-packages
Disable RPM files caching.
-f, --refresh
Enable autorefresh of the repository. The autorefresh is disabled by default when adding
new repositories.
Examples:
Add an HTTP repository, probe it, name it 'Packman 11.1 repo', and use 'packman' as alias:
$ zypper ar -c -n 'Packman 11.1 repo' http://packman.iu-bremen.de/suse/11.1 packman
Add repositories from a repo file:
$ zypper ar http://download.opensuse.org/repositories/zypp:/svn/openSUSE_Fac-
tory/zypp:svn.repo
$ zypper ar myreposbackup.repo
removerepo (rr) [options] <alias|name|#|URI> ...
Delete repositories specified by aliases, names, numbers or URIs.
--loose-auth
Ignore user authentication data in the URI
--loose-query
Ignore query string in the URI
repos (lr) [options] [repo] ...
List all defined repositories or show detailed information about those specified as argu-
ments
The following data can be printed for each repository found on the sytem: # (repository
number), Alias (shorthand for Name), Name, Enabled (whether the repository is enabled),
Refresh (whether auto-refresh is enabled for the repository), Priority, Type (repository
meta-data type: rpm-md, yast2, plaindir). Which of the data is shown is determined by com-
mand line options listed below and the main.repoListColumns setting from zypper.conf. By
default, #, Alias, Name, Enabled, and Refresh is shown.
Repository number is a unique identifier of the repository in current set of repositories.
If you add, remove or change a repository, the numbers may change. Keep that in mind when
using the numbers with the repository handling commands. On the other hand, using the
alias instead of the number is always safe.
To show detailed information about specific repositories, specify them as arguments,
either by alias, name, number from simple zypper lr, or by URI; e.g. fB zypper lr factory,
or zypper lr 2.
-e, --export <FILE.repo|->
This option causes zypper to write repository definition of all defined repositories into
a single file in repo file format. If '-' is specified instead of a file name, the repos-
itories will be written to the standard output.
-a, --alias
Add alias column to the output.
-n, --name
Add name column to the output.
-u, --uri
Add base URI column to the output.
-p, --priority
Add repository priority column to the output.
-r, --refresh
Add the autorefresh column to the output.
-d, --details
Show more information like URI, priority, type, etc.
-E, --show-enabled-only
Show enabled repositories only.
-U, --sort-by-uri
Add base URI column and sort the list it.
-P, --sort-by-priority
Add repository priority column and sort the list by it.
-A, --sort-by-alias
Sort the list by alias.
-N, --sort-by-name
Sort the list by name.
Examples:
Backup your repository setup:
$ zypper repos -e myreposbackup.repo
List repositories with their URIs and priorities:
$ zypper lr -pu
renamerepo (nr) <alias|name|#|URI> <new-alias>
Assign new alias to the repository specified by alias, name, number, or URI.
Example:
Rename repository number 8 to 'myrepo' (useful if the repo has some dreadful alias which
is not usable on the command line).
$ zypper nr 8 myrepo
modifyrepo (mr) <options> <alias|name|#|URI> ...
modifyrepo (mr) <options> <--all|--remote|--local|--medium-type>
Modify properties of repositories specified by alias, name, number, or URI or one of the
aggregate options.
-e, --enable
Enable the repository.
-d, --disable
Disable the repository.
-r, --refresh
Enable auto-refresh for the repository.
-R, --no-refresh
Disable auto-refresh for the repository.
-p, --priority <positive-integer>
Set priority of the repository. Priority of 1 is the highest, the higher the number the
lower the priority. Default priority is 99. Packages from repositories with higher prior-
ity will be preferred even in case there is a higher installable version available in the
repository with a lower priority.
-n, --name
Set a descriptive name for the repository.
-k, --keep-packages
Enable RPM files caching.
-K, --no-keep-packages
Disable RPM files caching.
-a, --all
Apply changes to all repositories.
-l, --local
Apply changes to all local repositories.
-t, --remote
Apply changes to all remote repositories (http/https/ftp).
-m, --medium-type <type>
Apply changes to repositories of specified type. The type corresponds to the repository
URI scheme identifier like http, dvd, etc. You can find complete list of valid types at
http://en.opensuse.org/openSUSE:Libzypp_URIs.
Examples:
Enable keeping of packages for all remote repositories:
$ zypper mr -kt
Enable repository 'updates' and switch on autorefresh for the repo:
$ zypper mr -er updates
Disable all repositories:
$ zypper mr -da
refresh (ref) [alias|name|#|URI] ...
Refresh repositories specified by their alias, name, number, or URI. If no repositories
are specified, all enabled repositories will be refreshed.
See also METADATA REFRESH POLICY section for more details.
-f, --force
Force a complete refresh of specified repositories. This option will cause both the down-
load of raw metadata and parsing of the metadata to be forced even if everything indicates
a refresh is not needed.
-b, --force-build
Force only reparsing of cached metadata and rebuilding of the database. Raw metadata down-
load will not be forced.
-d, --force-download
Force only download of current copy of repository metadata. Parsing and rebuild of the
database will not be forced.
-B, --build-only
Only parse the metadata and build the database, don't download raw metadata into the
cache. This will enable you to repair damaged database from cached data without accessing
network at all.
-D, --download-only
Only download the raw metadata, don't parse it or build the database.
-s, --services
Refresh also services before refreshing repositories.
clean (cc) [options] [alias|name|#|URI] ...
Clean the local caches for all known or specified repositories. By default,
only caches of downloaded packages are cleaned.
-m, --metadata
Clean repository metadata cache instead of package cache.
-M, --raw-metadata
Clean repository raw metadata cache instead of package cache.
-a, --all
Clean both repository metadata and package caches.
Service Management
The services, addservice, removeservice, modifyservice, and refresh-services commands serve for
manipulating services. A service is specified by its URI and needs to have a unique alias defined
(among both services and repositories).
Standalone repositories (not belonging to any service) are treated like services, too. The ls
command will list them, ms command will modify them, etc. Repository specific options, like
--keep-packages are not available here, though. You can use repository handling commands to
manipulate them.
addservice (as) [options] <URI> <alias>
Adds a service specified by URI to the system. The alias must be unique and serves to
identify the service.
Newly added services are not refereshed automatically. Use the refresh-services command to
refresh them. Zypper does not access the service URI when adding the service, so the type
of the services is unknown until it is refreshed.
This command also allows to add also ordinary repositories when used with --type option,
where you specify the type of the repository. See the addrepo command for the list of sup-
ported repository types.
-t, --type <TYPE>
Type of the service (possible values: ris). There are several aliases defined for this
type: ris - RIS, nu, NU
-d, --disable
Add the service as disabled.
-n, --name
Specify descriptive name for the service.
removeservice (rs) [options] <alias|name|#|URI> ...
Remove specified repository index service from the sytem.
Removing an RIS service will result in removing of all of its repositories.
--loose-auth
Ignore user authentication data in the URI.
--loose-query
Ignore query string in the URI.
modifyservice (ms) <options> <alias|name|#|URI>
modifyservice (ms) <options> <--all|--remote|--local|--medium-type> Modify properties of
specified services.
Common Options
These options are common to all types of services and repositories.
-d, --disable
Disable the service (but don't remove it).
-e, --enable
Enable a disabled service.
-r, --refresh
Enable auto-refresh of the service.
-R, --no-refresh
Disable auto-refresh of the service.
-n, --name
Set a descriptive name for the service.
-a, --all
Apply changes to all services.
-l, --local
Apply changes to all local services.
-t, --remote
Apply changes to all remote services.
-m, --medium-type <type>
Apply changes to services of specified type.
RIS Service Specific Options
These options are ignored by services other than Repository Index Services.
-i, --ar-to-enable <alias>
Schedule an RIS service repository to be enabled at next service refresh.
-I, --ar-to-disable <alias>
Schedule an RIS service repository to be disabled at next service refresh.
-j, --rr-to-enable <alias>
Remove a RIS service repository to enable.
-J, --rr-to-disable <alias>
Remove a RIS service repository to disable.
-k, --cl-to-enable
Clear the list of RIS repositories to enable.
-K, --cl-to-disable
Clear the list of RIS repositories to disable.
services (ls) [options]
List services defined on the system.
-u, --uri
Show also base URI of repositories.
-p, --priority
Show also repository priority.
-d, --details
Show more information like URI, priority, type.
-r, --with-repos
Show also repositories belonging to the services.
-P, --sort-by-priority
Sort the list by repository priority.
-E, --show-enabled-only
Show enabled services only. If used together with --with-repos a disabled service owning
(manually) enabled repositories is shown as well.
-U, --sort-by-uri
Sort the list by URI.
-N, --sort-by-name
Sort the list by name.
refresh-services (refs) [options] <alias|name|#|URI> ...
Refreshing a service mean executing the service's special task.
RIS services add, remove, or modify repositories on your system based on current content
of the repository index. Services only manage defined repositories, they do not refresh
them. To refresh also repositories, use --with-repos option or the refresh command.
-r, --with-repos
Refresh also repositories.
TODO more info
Package Locks Management
Package locks serve the purpose of preventing changes to the set of installed packages on the
system. The locks are stored in form of a query in /etc/zypp/locks file (see also locks(5)).
Packages matching this query are then forbidden to change their installed status; an installed
package can't be removed, not installed package can't be installed. When requesting to install
or remove such locked package, you will get a dependency problem dialog.
locks (ll)
List currently active package locks.
addlock (al) [options] <package-name> ...
Add a package lock. Specify packages to lock by exact name or by a glob pattern using '*'
and '?' wildcard characters.
-r, --repo <alias|name|#|URI>
Restrict the lock to the specified repository.
-t, --type <type>
Lock only packages of specified type (default: package). See section Package Types for
list of available package types.
removelock (rl) [options] <lock-number|package-name> ...
Remove specified package lock. Specify the lock to remove by its number obtained with zyp-
per locks or by the package name.
-r, --repo <alias|name|#|URI>
Restrict the lock to the specified repository.
-t, --type <type>
Restrict the lock to packages of specified type (default: package). See section Package
Types for list of available package types.
cleanlocks (cl)
Remove unused locks.
This command looks for locks that do not currently (with regard to repositories used) lock
any package and for each such lock it asks user whether to remove it.
Other Commands
versioncmp (vcmp) <version1> <version2>
Compare the versions supplied as arguments and tell whether version1 is older or newer
than version2 or the two version strings match.
The default output is in human-friendly form. If --terse global option is used, the result
is an integer number, negative/positive if version1 is older/newer than version2, zero if
they match.
-m, --match
Takes missing release number as any release. For example
$ zypper vcmp -m 0.15.3 0.15.3-2
0.15.3 matches 0.15.3-2
$ zypper vcmp 0.15.3 0.15.3-2
0.15.3 is older than 0.15.3-2
targetos (tos)
Shows the ID string of the target operating system. The string has a form of distroname-
arch. The string is determined by libzypp, the distroname is read from <current-root-
dir>/etc/products.d/baseproduct and the architecture is determined from uname and CPU
flags.
licenses
Prints a report about licenses and EULAs of installed packages to standard output.
First, a list of all packages and their licenses and/or EULAs is shown. This is followed
by a summary, including the total number of installed packages, the number of installed
packages with EULAs that required a confirmation from the user. Since the EULAs are not
stored on the system and can only be read from repository metadata, the summary includes
also the number of installed packages that have their counterpart in repositories. The
report ends with a list of all licenses uses by the installed packages.
This command can be useful for companies redistributiong a custom distribution (like
appliances) to figure out what licenses they are bound by.
source-download
Download source rpms for all installed packages to a local directory.
-d, --directory <dir>
Download all source rpms to this directory. Default is /var/cache/zypper/source-download.
--delete
Delete extraneous source rpms in the local directory. This is the default.
--no-delete
Do not delete extraneous source rpms.
--status
Don't download any source rpms, but show which source rpms are missing or extraneous.
ps After each upgrade or removal of packages, there may be running processes on the system
which then use files meanwhile deleted by the upgrade. zypper ps lists these processes,
together with the corresponding deleted files, and a service name hint, in case it's a
known service. The list contains the following information:
* PID ID of the process
* PPID ID of the parent process
* UID ID of the user running the process
* Login login name of the user running the process
* Command command used to execute the process
* Service guessed name of the service. If an init script exists for this
service, you can do "rcservicename restart" to restart it.
* Files the list of the deleted files
GLOBAL OPTIONS
-h, --help
Help. If a command is specified together with --help option, command specific help is dis-
played.
-V, --version
Print zypper version number and exit.
-c, --config <file>
Use specified zypper config file instead of the default files. Other command line options
specified together with --config and having their counterpart in the config file are still
prefered. The order of preference with --config is as follows:
* Command line options
* --config <file>
[ /etc/zypp/zypp.conf ] (system-wide defaults for all libzypp based applications)
See also FILES section for more information.
-v, --verbose
Increase verbosity. For debugging output specify this option twice.
-q, --quiet
Suppress normal output. Brief (esp. result notification) messages and error messages will
still be printed, though. If used together with conflicting --verbose option, the --ver-
bose option takes preference.
-A, --no-abbrev
Do not abbreviate text in tables. By default zypper will try to abbreviate texts in some
columns so that the table fits the width of the screen. If you need to see the whole text,
use this option.
-t, --terse
Terse output for machine consumption. Currently not used and provided only for compatibil-
ity with rug.
-s, --table-style
Specifies table style to use. Table style is identified by an integer number. TODO
-r, --rug-compatible
Turns on rug compatibility. See section COMPATIBILITY WITH RUG for details.
-n, --non-interactive
Switches to non-interactive mode. In this mode zypper doesn't ask user to type answers to
various prompts, but uses default answers automatically. The behaviour of this option is
somewhat different than that of options like '--yes', since zypper can answer different
answers to different questions. The answers also depend on other options like '--no-gpg-
checks'.
-x, --xmlout
Switches to XML output. This option is useful for scripts or graphical frontends using
zypper.
-i, --ignore-unknown
Ignore unknown packages. This option is useful for scripts.
-D, --reposd-dir <dir>
Use the specified directory to look for the repository definition (*.repo) files. The
default value is /etc/zypp/repos.d.
-C, --cache-dir <dir>
Use an alternative root directory for all caches. The default value is /var/cache/zypp.
--raw-cache-dir <dir>
Use the specified directory for storing raw copies of repository metadata files. The
default value is /var/cache/zypp/raw.
--solv-cache-dir <dir>
Use the specified directory to store the repository metadata cache database files (solv
files). The default value is /var/cache/zypp/solv.
--pkg-cache-dir <dir>
Use the specified directory for storing downloaded rpm packages. (see addrepo --keep-pack-
ages) The default value is /var/cache/zypp/packages.
--userdata <string>
User data is expected to be a simple string without special chars or embedded newlines and
may serve as transaction id. It will be written to all install history log entries created
throughout this specific zypper call. It will also be passed on to zypp plugins executed
during commit. This will enable e.g. a btrfs plugin to tag created snapshots with this
string. For zypper itself this string has no special meaning.
Repository Options:
--no-gpg-checks
Ignore GPG check failures and continue. If a GPG issue occurs when using this option zyp-
per prints and logs a warning and automatically continues without interrupting the opera-
tion. Use this option with caution, as you can easily overlook security problems by using
it.
--gpg-auto-import-keys
If new repository signing key is found, do not ask what to do; trust and import it auto-
matically. This option causes that the new key is imported also in non-interactive mode,
where it would otherwise got rejected.
-p, --plus-repo <URI>
Use an additional repository for this operation. The repository aliased tmp# and named by
the specified URI will be added for this operation and removed at the end. You can specify
this option multiple times.
--disable-repositories
Do not read metadata from repositories. This option will prevent loading of packages from
repositories, thus making zypper work only with the installed packages (if --disable-sys-
tem-resolvables was not specified).
--no-refresh
Do not auto-refresh repositories (ignore the auto-refresh setting). Useful to save time
when doing operations like search, if there is not a need to have a completely up to date
metadata.
--no-cd
Ignore CD/DVD repositories. When this option is specified, zypper acts as if the CD/DVD
repositories were not defined at all.
--no-remote
Ignore remote repositories like http, ftp, smb and similar. This makes using zypper easier
when being offline. When this option is specified, zypper acts as if the remote reposito-
ries were not defined at all.
Target Options:
-R, --root <dir>
Operates on a different root directory. This option influences the location of the repos.d
directory and the metadata cache directory and also causes rpm to be run with the --root
option to do the actual installation or removal of packages. Note that the ZYpp lock is
still created in the original system, as well as temporary files. See also the FILES sec-
tion.
--disable-system-resolvables
This option serves mainly for testing purposes. It will cause zypper to act as if there
were no packages installed in the system. Use with caution as you can damage your system
using this option.
FILES
/etc/zypp/zypper.conf, $HOME/.zypper.conf
Global (system-wide) and user's configuration file for zypper. These files are read when
zypper starts up and --config option is not used.
User's settings are prefered over global settings. Similarly, command line options over-
ride the settings in either of these files. To sum it up, the order of preference is as
follows (from highest to lowest):
* Command line options
* $HOME/.zypper.conf
* /etc/zypp/zypper.conf
[ /etc/zypp/zypp.conf ] (system-wide defaults for all libzypp based applications)
See the comments in /etc/zypp/zypper.conf for a list and description of available options.
/etc/zypp/zypp.conf
ZYpp configuration file affecting all libzypp based applications. See the comments in the
file for desciption of configurable properties. Many locations of files and directories
listed in this section are configurable via zypp.conf. The location for this file itself
can be redefined only by setting $ZYPP_CONF in the environment.
/etc/zypp/locks
File with package lock definitions, see locks(5) manual page for details. The package
lock commands (addlock, removelock, etc.) can be used to manipulate this file.
This file is used by all ZYpp-based applications.
/etc/zypp/repos.d
Directory containing repository definition (*.repo) files. You can use the Repository
Management commands to manipulate these files, or you can edit them yourself. In either
case, after doing the modifications, executing zypper refresh is strongly recommended.
This directory is used by all ZYpp-based applications.
You can use the --reposd-dir global option to use an alternative directory for this pur-
pose or the --root option to make this directory relative to the specified root directory.
/etc/zypp/services.d
Directory containing service definition (*.service) files. You can use the Service Man-
agement Commands to manipulate theese files, or you can edit them youself. Running zypper
refs is recommended after modifications have been done.
This directory is used by all ZYpp-based applications.
/var/cache/zypp/raw
Directory for storing raw metadata contained in repositories. This directory is used by
all ZYpp-based applications. Use the --raw-cache-dir global option to use an alternative
directory for this purpose or the --root option to make this directory relative to the
specified root directory.
/var/cache/zypp/solv
Directory containing preparsed metadata in form of solv files. This directory is used by
all ZYpp-based applications.
/var/cache/zypp/packages
If keeppackages property is set for a repository (see the modifyrepo command), all the RPM
file downloaded during installation will be kept here. See also the clean command for
cleaning these cache directories.
This directory is used by all ZYpp-based applications.
/var/log/zypp/history
Installation history log.
~/.zypper_history
Command history for the shell.
EXIT CODES
There are several exit codes defined for zypper for use e.g. within scripts. These codes are
defined in header file src/zypper-main.h found in zypper source package. Codes from interval
(1-5) denote an error, numbers (100-105) provide a specific information, 0 represents a normal
successful run. Following is a list of these codes with descriptions.
0 - ZYPPER_EXIT_OK
Successfull run of zypper with no special info.
1 - ZYPPER_EXIT_ERR_BUG
Unexpected situation occured, probably caused by a bug.
2 - ZYPPER_EXIT_ERR_SYNTAX
zypper was invoked with an invalid command or option, or a bad syntax.
3 - ZYPPER_EXIT_ERR_INVALID_ARGS
Some of provided arguments were invalid. E.g. an invalid URI was provided to the addrepo
command.
4 - ZYPPER_EXIT_ERR_ZYPP
A problem is reported by ZYPP library.
5 - ZYPPER_EXIT_ERR_PRIVILEGES
User invoking zypper has insufficient privileges for specified operation.
6 - ZYPPER_EXIT_NO_REPOS
No repositories are defined.
7 - ZYPPER_EXIT_ZYPP_LOCKED
The ZYPP library is locked, e.g. packagekit is running.
100 - ZYPPER_EXIT_INF_UPDATE_NEEDED
Returned by the patch-check command if there are patches available for installation.
101 - ZYPPER_EXIT_INF_SEC_UPDATE_NEEDED
Returned by the patch-check command if there are security patches available for installa-
tion.
102 - ZYPPER_EXIT_INF_REBOOT_NEEDED
Returned after a successfull installation of a patch which requires reboot of computer.
103 - ZYPPER_EXIT_INF_RESTART_NEEDED
Returned after a successfull installation of a patch which requires restart of the package
manager itself. This means that one of patches to be installed affects the package manager
itself and the command used (e.g. zypper update) needs to be executed once again to
install any remaining patches.
104 - ZYPPER_EXIT_INF_CAP_NOT_FOUND
Returned by the install and the remove command in case any of the arguments does not match
any of the available (or installed) package names or other capabilities.
105 - ZYPPER_EXIT_ON_SIGNAL
Returned upon exiting after receiving a SIGINT or SIGTERM.
COMPATIBILITY WITH RUG
zypper is designed to be compatible with rug, which is a command-line interface to the ZENworks
Linux Management (ZLM) agent. Compared to rug, zypper does not need the ZLM daemon to run, and is
intented to provide more and improved functionality. Following is a list of zypper-rug command
aliases, supported rug command line options, and compatibility notes. See also compatibility
notes in descriptions of zypper commands.
To enable rug-compatible behavior, use the -r or --rug-compatible global option with each com-
mand.
Service Management Commands
ZENworks uses different terminology than ZYpp. ZLM services are ZYpp's repositories and services.
Additionally some ZLM services can contain catalogs (rpmmd-type repositories in ZYpp speak).
Zypper tries to mimick rug's behavior in its service handling commands when used with the -r
global option. It also supports the --catalog option for specifying catalogs to work with in cur-
rent operation (this is an alias for zypper's --repo option).
rug service-add (sa)
zypper addservice (as) When used with -r global option, this command probes the type of
service or repository at the specified URI, if not explicitly specified. Without -r option
the URI is not accessed at all and the URI is added as ZYpp service.
rug service-delete (sd)
zypper removeservice (rs)
rug service-list (sl)
zypper services (ls)
rug catalogs (ca)
zypper repos (lr)
zypper doesn't include 'Enabled' and 'Refresh' columns and prints rug's 'Status' column
with values "Active" or "Disabled" instead.
rug subscribe
This command is not implemented in zypper. Enabling zypper repositories is closest to
rug's subscription of catalogs. Thus, you can use zypper mr -e <alias|name|#|URI> to
enable repositories added by the service. Use zypper lr (or zypper ca) to list available
repositories.
rug unsubscribe
See subscribe above, with the difference that -d will be used instead of -e in the zypper
mr command.
Package Management Commands
rug install (in)
zypper install (in)
-y, --no-confirm
Don't require user interaction. This option is implemented using zypper's non-
interactive mode.
--agree-to-third-party-licenses
This option is an alias to zypper's --auto-agree-with-licenses option.
-R, --force-resolution <on|off>
This option is not available in rug and zypper uses the 'force-resolution' solver
mode by default when running in rug-compatible mode. However, it is possible to
turn the forcing of resolution off using this option even in rug-compatible mode.
--entire-catalog <catalog>
This option serves for marking all packages from specified catalog for installa-
tion. This is achieved by simulating 'zypper in --from <repo> '*''.
rug remove (rm)
zypper remove (rm)
-y, --no-confirm
Don't require user interaction. This option is implemented using zypper's non-
interactive mode.
-R, --force-resolution <on|off>
This option is not available in rug and zypper uses the 'force-resolution' solver
mode by default when running in rug-compatible mode. However, it is possible to
turn the forcing of resolution off using this option even in rug-compatible mode.
rug verify (ve)
zypper verify (ve)
-y, --no-confirm
Don't require user interaction. This option is implemented using zypper's non-
interactive mode.
rug update (up) [catalog] ...
zypper update (up) [package] ...
Zypper interprets the update command arguments as repository identifiers in rug-compati-
bilty mode. The update operation is restricted to the specified repositories.
-y, --no-confirm
Don't require user interaction. This option is implemented using zypper's non-
interactive mode.
--agree-to-third-party-licenses
This option is an alias to zypper's --auto-agree-with-licenses option.
-R, --force-resolution <on|off>
This option is not available in rug and zypper uses the 'force-resolution' solver
mode by default when running in rug-compatible mode. However, it is possible to
turn the forcing of resolution off using this option even in rug-compatible mode.
-d, --downloade-only
This option has currently no effect.
--category
This option has currently no effect.
rug search (se)
zypper search (se)
Instead of the Type column, rug's Bundle column is printed, however, with no contents.
-t, --type
In rug compatibility mode the --type option defaults to package. Zypper searches
all package types by default.
--sort-by-catalog
Sort packages by catalog, not by name. This option is an alias to zypper's
--sort-by-repo option.
Patch Management Commands
rug patch-info
zypper info -t patch
Pattern Management Commands
rug pattern-info
zypper info -t pattern
Product Management Commands
rug product-info
zypper info -t product
System Commands
rug ping
zypper ping
This command just returns 0 without producing any output or doing anything to the system.
Rug's ping command is used to wake up the ZLM daemon or to check whether it is up and run-
ning. Since zypper does no require ZLM or any other daemon to run, it is safe to always
return 0 here to indicate it is ready for operation.
Other Compatibility Notes
-c, --catalog <catalog>
This option is an alias to zypper's --repo <alias> and it will restrict the operation of
commands like search, install, etc to the repository specified by the alias.
-N, --dry-run
Zypper uses -D shorthand for this option, but -N is provided for the sake of compatibil-
ity. Zypper (libzypp) implements this option by passing the --test option to rpm. The
option is used in install, remove, update, dist-upgrade (not available in rug), and verify
commands.
HOMEPAGE
http://en.opensuse.org/Portal:Zypper
AUTHORS
Martin Vidner <mvidner@suse.cz>
Duncan Mac-Vicar <dmacvicar@suse.de>
Jan Kupec <jkupec@suse.cz>
Stanislav Visnovsky <visnov@suse.cz>
Josef Reidinger <jreidinger@suse.cz>
SEE ALSO
rug(1), YaST2(8), locks(5), zypper-log(8)
zypper 1.5.1 zypper(8)
Zurück zu Konsole
Zurück zur Paketmanager-Übersicht