Hauppauge A415-HPG-WE Fernbedienung
Version vom 20. Januar 2014, 06:11 Uhr von Gehrke (Diskussion | Beiträge) (interne Verlinkung, nichts Inhaltliches)
Hier ist eine /etc/lircd.conf Datei für die Fernbedienungen der WinTV PVR 350 (Typ A415-HPG) und WinTV Nova S Plus (Typ A415-HPG-WE) die im Falle der Nova S Plus mit dem Kernelmodul cx88xx für den IR-Port einen Unterbau für das ir-kbd-i2c Modul liefert, auf das dann wiederum lirc aufsetzt. Für die meisten TV-Karten die mit dieser Fernbedienung laufen dürfte das benötigte Kernelmodul ebenso wie für die Nova-S plus per YaST im letzten Schritt der TV-Kartenkonfiguration aktivierbar sein. |
# # this config file was automatically generated # using lirc-0.7.0(any) on Sun Nov 28 20:25:09 2004 # # contributed by # # brand: Hauppauge 350 # Created: G.J. Werler (The Netherlands) # Project: Mythtv Fedora Pundit-R www.mythtvportal.com # Date: 2004/11/28 # model no. of remote control: Hauppauge A415-HPG # devices being controlled by this remote: PVR-350 # # Also testet with Hauppauge A415-HPG-WE from WinTV Nova S Plus # tested by Tom Meierjürgen (Germany) # Date: 2007/03/12 # Device tested with the WE Model of the Remote: WinTV Nova S Plus # begin remote name Hauppauge_350 bits 13 flags RC5|CONST_LENGTH eps 30 aeps 100 one 969 811 zero 969 811 plead 1097 gap 114605 toggle_bit 2 begin codes 'GO' 0x00000000000017BB # Go 'POWER' 0x00000000000017BD # Power 'TV' 0x000000000000179C # TV 'VIDEOS' 0x0000000000001798 # Videos 'MUSIC' 0x0000000000001799 # Music 'PICTURES' 0x000000000000179A # Pictures 'GUIDE' 0x000000000000179B # Guide 'RADIO' 0x000000000000178C # Radio 'UP' 0x0000000000001794 # Up 'LEFT' 0x0000000000001796 # Left 'RIGHT' 0x0000000000001797 # Right 'DOWN' 0x0000000000001795 # Down 'OK' 0x00000000000017A5 # OK 'BACK/EXIT' 0x000000000000179F # Back/Exit 'MENU/I' 0x000000000000178D # Menu/i 'VOLUMEUP' 0x0000000000001790 # Vol+ 'VOLUMEDOWN' 0x0000000000001791 # Vol- 'PREV.CH' 0x0000000000001792 # Prev.Ch 'MUTE' 0x000000000000178F # Mute 'CHANNELUP' 0x00000000000017A0 # Ch+ 'CHANNELDOWN' 0x00000000000017A1 # Ch- 'RECORD' 0x00000000000017B7 # Record 'STOP' 0x00000000000017B6 # Stop 'REWIND' 0x00000000000017B2 # Rewind 'PLAY' 0x00000000000017B5 # Play 'FORWARD' 0x00000000000017B4 # Forward 'REPLAY/SKIPBACKWARD' 0x00000000000017A4 # Replay/SkipBackward 'PAUSE' 0x00000000000017B0 # Pause 'SKIPFORWARD' 0x000000000000179E # SkipForward '1' 0x0000000000001781 # 1 '2' 0x0000000000001782 # 2 '3' 0x0000000000001783 # 3 '4' 0x0000000000001784 # 4 '5' 0x0000000000001785 # 5 '6' 0x0000000000001786 # 6 '7' 0x0000000000001787 # 7 '8' 0x0000000000001788 # 8 '9' 0x0000000000001789 # 9 'ASTERIX' 0x000000000000178A # Asterix '0' 0x0000000000001780 # 0 '#' 0x000000000000178E # # 'RED' 0x000000000000178B # Red 'GREEN' 0x00000000000017AE # Green 'YELLOW' 0x00000000000017B8 # Yellow 'BLUE' 0x00000000000017A9 # Blue end codes end remote
--TomcatMJ 16:39, 14. Mär 2007 (CET)
Hier noch die zugehörige /etc/sysconfig/lirc :
## Path: Hardware/Lirc ## Description: lirc (infrared remote control) configuration ## Type: string ## Default: "660" ## ServiceRestart: lirc # # permissions for /dev/lircd # LIRCD_DEV_PERMISSIONS="660" ## Type: string ## Default: "root:video" # # owner and group for /dev/lircd # LIRCD_DEV_OWNER="root:video" ## Type: string ## Default: "" # # use given driver # LIRCD_DRIVER="" ## Type: string ## Default: "" # # read from given device # LIRCD_DEVICE="" ## Type: string(lirc_bt829,lirc_gpio,lirc_i2c,lirc_it87,lirc_parallel,lirc_sir,ir-kbd-i2c,ir-kbd-gpio) ## Default: "" # # load given lirc driver module # LIRC_MODULE="ir-kbd-i2c" ## Type: string ## Default: "" # # listen for network connections on specified port. # WARNING: don't use this on a machine with an internet # connection as lircd is running as root! # LIRCD_LISTENPORT="" ## Type: string ## Default: "" # # connect lircd to specified host # LIRCD_CONNECT=""
--TomcatMJ 08:14, 22. Nov. 2007 (CET)
Zurück zu den Musterkonfigurationen
Zurück zur Multimediaübersicht
Zurück zur Hardwareübersicht