MosNis Installation/Integration der Betriebssysteme/openSUSE 10.1
Version vom 17. September 2006, 17:58 Uhr von TomcatMJ (Diskussion | Beiträge) (Offizielles Logo hinzugefügt)
 |
Achtung dieser Artikel ist noch in Arbeit und dient vorläufig nur als Vorlage. Dieser Beitrag zu Linux oder der Abschnitt ist in Bearbeitung. Weitere Informationen findest du hier. Der Ersteller arbeitet an dem Beitrag oder Abschnitt und entsorgt den Wartungsbaustein spätestens 3 Tage nach der letzten Bearbeitung. Änderungen außer Rechtschreibkorrekturen ohne Absprache mit dem Urspungsautor sind möglichst zu vermeiden, solange dieser Baustein noch innerhalb der genannten Frist aktiviert ist. |
--TomcatMJ 04:06, 12. Sep 2006 (CEST)
Da bei openSUSE 10.1 sowohl die 32 Bit als auch die 64 Bit Version identisch zu handhaben sind, wird im weiteren nur von openSUSE, nicht jedoch von 32 Bit oder 64 Bit die Rede sein.
Als erstes mounten wir die DVD oder das DVD-ISO-Image. Dann legen wir eine passende Verzeichnisstruktur im Installationsserververzeichnis an mit
mkdir /Installserver/openSUSE/10.1/32Bit
bzw.
mkdir /Installserver/openSUSE/10.1/64Bit
und kopieren den gesamten Inhalt der DVDs bzw. der ISO-Images dort hinein. Für den zu bootenden Kernel legen wir im Hauptverzeichnis des TFTP-Servers passende Unterverzeichnisse an in die wir die zur jeweiligen Architektur passenden Kernelimages und Initialramdiskimages legen. Dies erledigen wir wieder mit
mkdir /tftpboot/openSUSE/10.1/32Bit
und
mkdir /tftpboot/openSUSE/10.1/64Bit
Dorthin kopieren wir dann die Dateien
/Installserver/openSUSE/10.1/32Bit/boot/i386/loader/initrd
und
/Installserver/openSUSE/10.1/32Bit/boot/i386/loader/linux
bzw. Äquivalentes für die 64 Bit Version. Wenn mit Autoyast gearbeitet werden soll für unbeaufsichtigte Installationen, installieren wir noch das yast-autoyast Softwarepaket per Yast, Apt, Smart, Yum oder per rpm -Uvh <paketname> und erstellen damit eine passende Datei namens autoyast.xml (Näheres dazu dann später im AutoMosNis-Abschnitt). Diese benennen wir in z.B. a-yast1.xml um, da pxelinux leider eine Zeichenbegrenzung für Pfade plus Dateinamen von 127 Zeichen und die 8.3er DOS-Dateinamenskonvention zur Dateiunterscheidung einsetzt und legen noch ein Verzeichnis dafür im Installationsserververzeichnis an mit
mkdir /Installserver/openSUSE/10.1/autoyast
wohin wir die eben erstellte Datei dann kopieren oder verschieben. Danach legen wir die openSUSE- Menüdateien für den PXE-Linux Bootloader an:
Die openSUSE Hauptauswahl /tftpboot/openSUSE101.conf :
DEFAULT menu.c32 PROMPT 0 MENU TITLE openSUSE 10.1 # 64 Bit NFS LABEL openSUSE 10.1 64 Bit NFS MENU LABEL openSUSE 10.1 64 Bit NFS KERNEL menu.c32 APPEND OS64NFS.conf # 64 Bit FTP LABEL openSUSE 10.1 64 Bit FTP MENU LABEL openSUSE 10.1 64 Bit FTP KERNEL menu.c32 APPEND OS64FTP.conf # 64 Bit HTTP LABEL openSUSE 10.1 64 Bit HTTP MENU LABEL openSUSE 10.1 64 Bit HTTP KERNEL menu.c32 APPEND OS64HTTP.conf # 64 Bit SMB LABEL openSUSE 10.1 64 Bit SMB MENU LABEL openSUSE 10.1 64 Bit SMB KERNEL menu.c32 APPEND OS64SMB.conf # 32 Bit NFS LABEL openSUSE 10.1 32 Bit NFS MENU LABEL openSUSE 10.1 32 Bit NFS KERNEL menu.c32 APPEND OS32NFS.conf # 32 Bit FTP LABEL openSUSE 10.1 32 Bit FTP MENU LABEL openSUSE 10.1 32 Bit FTP KERNEL menu.c32 APPEND OS32FTP.conf # 32 Bit HTTP LABEL openSUSE 10.1 32 Bit HTTP MENU LABEL openSUSE 10.1 32 Bit HTTP KERNEL menu.c32 APPEND OS32HTTP.conf # 32 Bit SMB LABEL openSUSE 10.1 32 Bit SMB MENU LABEL openSUSE 10.1 32 Bit SMB KERNEL menu.c32 APPEND OS32SMB.conf # Hauptauswahl LABEL mainback MENU LABEL Zur Hauptauswahl KERNEL menu.c32 APPEND MAIN.conf #Deutsche Tastaturbelegung KBDMAP german.kbd #Menüeinstellungen MENU WIDTH 80 MENU MARGIN 10 MENU ROWS 12 MENU TABMSGROW 18 MENU CMDLINEROW 12 MENU ENDROW 24 MENU TIMEOUTROW 20 ONTIMEOUT localboot TIMEOUT 200 #Hilfstexte F1 S-Hilfe.txt F2 S-SMB.txt F3 S-FTP.txt F4 S-HTTP.txt F5 S-SMB.txt F6 Hauptauswahl.txt
Die nachfolgenden in der openSUSE Auswahl genutzten openSUSE Menüs :
/tftpboot/OS64NFS.conf :
DEFAULT menu.c32
PROMPT 0
MENU TITLE openSUSE 10.1 64 Bit per NFS
# 64Bit NFS install
LABEL Linux64NFSManual
MENU LABEL openSUSE 10.1 64 Bit Manuelle Installation
KERNEL openSUSE/10.1/64Bit/linux
APPEND initrd=openSUSE/10.1/64Bit/initrd splash=silent showopts insmod=e100 insmod=e1000 insmod=8139too insmod=forcedeth install=nfs://192.168.2.1/Installserver/openSUSE/10.1/64Bit/
# 64Bit NFS install noacpi
LABEL Linux64NFSManualNoACPI
MENU LABEL openSUSE 10.1 64 Bit Manuelle Installation ohne ACPI
KERNEL openSUSE/10.1/64Bit/linux
APPEND initrd=openSUSE/10.1/64Bit/initrd splash=silent showopts acpi=off insmod=e100 insmod=e1000 insmod=8139too insmod=forcedeth install=nfs://192.168.2.1/Installserver/openSUSE/10.1/64Bit/
# 64Bit NFS install nolapic
LABEL Linux64NFSManualNoLapic
MENU LABEL openSUSE 10.1 64 Bit Manuelle Installation ohne APIC
KERNEL openSUSE/10.1/64Bit/linux
APPEND initrd=openSUSE/10.1/64Bit/initrd splash=silent showopts nolapic insmod=e100 insmod=e1000 insmod=8139too insmod=forcedeth install=nfs://192.168.2.1/Installserver/openSUSE/10.1/64Bit/
# 64Bit NFS failsafe
LABEL Linux64NFSfailsafe
MENU LABEL openSUSE 10.1 64 Bit Manuelle Installation Failsafe
KERNEL openSUSE/10.1/64Bit/linux
APPEND initrd=openSUSE/10.1/64Bit/initrd splash=silent showopts apm=off acpi=off mce=off barrier=off ide=nodma idewait=50 i8042.nomux psmouse.proto=bare irqpoll pci=nommconf insmod=e100 insmod=e1000 insmod=8139too insmod=forcedeth install=nfs://192.168.2.1/Installserver/openSUSE/10.1/64Bit/
# 64Bit NFS rescue
LABEL Linux64NFSrescue
MENU LABEL openSUSE 10.1 64 Bit Rettungssystem
KERNEL openSUSE/10.1/64Bit/linux
APPEND initrd=openSUSE/10.1/64Bit/initrd splash=silent rescue=1 showopts insmod=e100 insmod=e1000 insmod=8139too insmod=forcedeth install=nfs://192.168.2.1/Installserver/openSUSE/10.1/64Bit/
# 64Bit NFS autoyast
LABEL Linux64NFSautoyast
MENU LABEL openSUSE 10.1 64 Bit Installation per Autoyast
KERNEL openSUSE/10.1/64Bit/linux
APPEND initrd=openSUSE/10.1/64Bit/initrd splash=silent showopts insmod=e100 insmod=e1000 insmod=8139too insmod=forcedeth install=nfs://192.168.2.1/Installserver/openSUSE/10.1/64Bit/
autoyast=nfs://192.168.2.1/Installserver/openSUSE/10.1/autoyast/ay64nfs.xml
# 64Bit NFS Remoteinstall mit VNC
LABEL Linux64NFSremote
MENU LABEL openSUSE 10.1 64 Bit Remoteinstallation mit VNC
KERNEL openSUSE/10.1/64Bit/linux
APPEND initrd=openSUSE/10.1/64Bit/initrd splash=silent showopts insmod=e100 insmod=e1000 insmod=8139too insmod=forcedeth vnc=1 vncpassword=opensuse install=nfs://192.168.2.1/Installserver/openSUSE/10.1/64Bit/
# openSUSE
LABEL back
MENU LABEL openSUSE Auswahl
KERNEL menu.c32
APPEND openSUSE.conf
#Deutsche Tastaturbelegung
KBDMAP german.kbd
#Menüeinstellungen
MENU WIDTH 80
MENU MARGIN 10
MENU ROWS 12
MENU TABMSGROW 18
MENU CMDLINEROW 12
MENU ENDROW 24
MENU TIMEOUTROW 20
ONTIMEOUT back
TIMEOUT 200
#Hilfstexte
F1 S-Hilfe2.txt
F2 Hauptauswahl.txt
/tftpboot/OS64FTP.conf :
DEFAULT menu.c32
PROMPT 0
MENU TITLE openSUSE 10.1 64 Bit per FTP
# 64Bit FTP install
LABEL Linux64FTPManual
MENU LABEL openSUSE 10.1 64 Bit Manuelle Installation
KERNEL openSUSE/10.1/64Bit/linux
APPEND initrd=openSUSE/10.1/64Bit/initrd splash=silent showopts insmod=e100 insmod=e1000 insmod=8139too insmod=forcedeth install=ftp://192.168.2.1/Installserver/openSUSE/10.1/64Bit/
# 64Bit FTP install noacpi
LABEL Linux64FTPManualNoACPI
MENU LABEL openSUSE 10.1 64 Bit Manuelle Installation ohne ACPI
KERNEL openSUSE/10.1/64Bit/linux
APPEND initrd=openSUSE/10.1/64Bit/initrd splash=silent showopts acpi=off insmod=e100 insmod=e1000 insmod=8139too insmod=forcedeth install=ftp://192.168.2.1/Installserver/openSUSE/10.1/64Bit/
# 64Bit FTP install nolapic
LABEL Linux64FTPManualNoLapic
MENU LABEL openSUSE 10.1 64 Bit Manuelle Installation ohne APIC
KERNEL openSUSE/10.1/64Bit/linux
APPEND initrd=openSUSE/10.1/64Bit/initrd splash=silent showopts nolapic insmod=e100 insmod=e1000 insmod=8139too insmod=forcedeth install=ftp://192.168.2.1/Installserver/openSUSE/10.1/64Bit/
# 64Bit FTP failsafe
LABEL Linux64FTPfailsafe
MENU LABEL openSUSE 10.1 64 Bit Manuelle Installation Failsafe-Mode
KERNEL openSUSE/10.1/64Bit/linux
APPEND initrd=openSUSE/10.1/64Bit/initrd splash=silent showopts apm=off acpi=off mce=off barrier=off ide=nodma idewait=50 i8042.nomux psmouse.proto=bare irqpoll pci=nommconf insmod=e100 insmod=e1000 insmod=8139too insmod=forcedeth install=ftp://192.168.2.1/Installserver/openSUSE/10.1/64Bit/
# 64Bit FTP rescue
LABEL Linux64FTPrescue
MENU LABEL openSUSE 10.1 64 Bit Rettungssystem
KERNEL openSUSE/10.1/64Bit/linux
APPEND initrd=openSUSE/10.1/64Bit/initrd splash=silent rescue=1 showopts insmod=e100 insmod=e1000 insmod=8139too insmod=forcedeth install=ftp://192.168.2.1/Installserver/openSUSE/10.1/64Bit/
# 64Bit FTP autoyast
LABEL Linux64FTPautoyast
MENU LABEL openSUSE 10.1 64 Bit Installation per Autoyast
KERNEL openSUSE/10.1/64Bit/linux
APPEND initrd=openSUSE/10.1/64Bit/initrd splash=silent showopts insmod=e100 insmod=e1000 insmod=8139too insmod=forcedeth install=ftp://192.168.2.1/Installserver/openSUSE/10.1/64Bit/
autoyast=ftp://192.168.2.1/Installserver/openSUSE/10.1/autoyast/ay64ftp.xml
# 64Bit FTP remoteinstall
LABEL Linux64FTPremote
MENU LABEL openSUSE 10.1 64 Bit Remoteinstallation mit VNC
KERNEL openSUSE/10.1/64Bit/linux
APPEND initrd=openSUSE/10.1/64Bit/initrd splash=silent showopts insmod=e100 insmod=e1000 insmod=8139too insmod=forcedeth vnc=1 vncpassword=opensuse install=ftp://192.168.2.1/Installserver/openSUSE/10.1/64Bit/
# openSUSE
LABEL back
MENU LABEL openSUSE Auswahl
KERNEL menu.c32
APPEND openSUSE.conf
#Deutsche Tastaturbelegung
KBDMAP german.kbd
#Menüeinstellungen
MENU WIDTH 80
MENU MARGIN 10
MENU ROWS 12
MENU TABMSGROW 18
MENU CMDLINEROW 12
MENU ENDROW 24
MENU TIMEOUTROW 20
ONTIMEOUT back
TIMEOUT 200
#Hilfstexte
F1 S-Hilfe2.txt
F2 Hauptauswahl.txt
/tftpboot/OS64HTTP.conf :
DEFAULT menu.c32
PROMPT 0
MENU TITLE openSUSE 10.1 64 Bit per HTTP
# 64Bit HTTP install
LABEL Linux64HTTPManual
MENU LABEL openSUSE 10.1 64 Bit Manuelle Installation
KERNEL openSUSE/10.1/64Bit/linux
APPEND initrd=openSUSE/10.1/64Bit/initrd splash=silent showopts insmod=e100 insmod=e1000 insmod=8139too insmod=forcedeth install=http://192.168.2.1/Installserver/openSUSE/10.1/64Bit/
# 64Bit HTTP install noacpi
LABEL Linux64HTTPManualNoACPI
MENU LABEL openSUSE 10.1 64 Bit Manuelle Installation ohne ACPI
KERNEL openSUSE/10.1/64Bit/linux
APPEND initrd=openSUSE/10.1/64Bit/initrd splash=silent showopts acpi=off insmod=e100 insmod=e1000 insmod=8139too insmod=forcedeth install=http://192.168.2.1/Installserver/openSUSE/10.1/64Bit/
# 64Bit HTTP install nolapic
LABEL Linux64HTTPManualNoLapic
MENU LABEL openSUSE 10.1 64 Bit Manuelle Installation ohne APIC
KERNEL openSUSE/10.1/64Bit/linux
APPEND initrd=openSUSE/10.1/64Bit/initrd splash=silent showopts nolapic insmod=e100 insmod=e1000 insmod=8139too insmod=forcedeth install=http://192.168.2.1/Installserver/openSUSE/10.1/64Bit/
# 64Bit HTTP failsafe
LABEL Linux64HTTPfailsafe
MENU LABEL openSUSE 10.1 64 Bit Manuelle Installation Failsafe-Mode
KERNEL openSUSE/10.1/64Bit/linux
APPEND initrd=openSUSE/10.1/64Bit/initrd splash=silent showopts apm=off acpi=off mce=off barrier=off ide=nodma idewait=50 i8042.nomux psmouse.proto=bare irqpoll pci=nommconf insmod=e100 insmod=e1000 insmod=8139too insmod=forcedeth install=http://192.168.2.1/Installserver/openSUSE/10.1/64Bit/
# 64Bit HTTP rescue
LABEL Linux64HTTPrescue
MENU LABEL openSUSE 10.1 64 Bit Rettungssystem
KERNEL openSUSE/10.1/64Bit/linux
APPEND initrd=openSUSE/10.1/64Bit/initrd splash=silent rescue=1 showopts insmod=e100 insmod=e1000 insmod=8139too insmod=forcedeth install=http://192.168.2.1/Installserver/openSUSE/10.1/64Bit/
# 64Bit HTTP autoyast
LABEL Linux64HTTPautoyast
MENU LABEL openSUSE 10.1 64 Bit Installation per Autoyast
KERNEL openSUSE/10.1/64Bit/linux
APPEND initrd=openSUSE/10.1/64Bit/initrd splash=silent showopts insmod=e100 insmod=e1000 insmod=8139too insmod=forcedeth install=http://192.168.2.1/Installserver/openSUSE/10.1/64Bit/
autoyast=http://192.168.2.1/Installserver/openSUSE/10.1/autoyast/ay64http.xml
# 64Bit HTTP remoteinstall
LABEL Linux64HTTPremote
MENU LABEL openSUSE 10.1 64 Bit Remoteinstallation mit VNC
KERNEL openSUSE/10.1/64Bit/linux
APPEND initrd=openSUSE/10.1/64Bit/initrd splash=silent showopts insmod=e100 insmod=e1000 insmod=8139too insmod=forcedeth vnc=1 vncpassword=opensuse install=http://192.168.2.1/Installserver/openSUSE/10.1/64Bit/
# openSUSE
LABEL back
MENU LABEL openSUSE Auswahl
KERNEL menu.c32
APPEND openSUSE.conf
#Deutsche Tastaturbelegung
KBDMAP german.kbd
#Menüeinstellungen
MENU WIDTH 80
MENU MARGIN 10
MENU ROWS 12
MENU TABMSGROW 18
MENU CMDLINEROW 12
MENU ENDROW 24
MENU TIMEOUTROW 20
ONTIMEOUT back
TIMEOUT 200
#Hilfstexte
F1 S-Hilfe2.txt
F2 Hauptauswahl.txt
/tftpboot/OS64SMB.conf :
DEFAULT menu.c32
PROMPT 0
MENU TITLE openSUSE 10.1 64 Bit per SMB
# 64Bit SMB install
LABEL Linux64SMBManual
MENU LABEL openSUSE 10.1 64 Bit Manuelle Installation
KERNEL openSUSE/10.1/64Bit/linux
APPEND initrd=openSUSE/10.1/64Bit/initrd splash=silent showopts insmod=e100 insmod=e1000 insmod=8139too insmod=forcedeth install=smb://192.168.2.1/Installserver/openSUSE/10.1/64Bit/
# 64Bit SMB install noacpi
LABEL Linux64SMBManualNoACPI
MENU LABEL openSUSE 10.1 64 Bit Manuelle Installation ohne ACPI
KERNEL openSUSE/10.1/64Bit/linux
APPEND initrd=openSUSE/10.1/64Bit/initrd splash=silent showopts acpi=off insmod=e100 insmod=e1000 insmod=8139too insmod=forcedeth install=smb://192.168.2.1/Installserver/openSUSE/10.1/64Bit/
# 64Bit SMB install nolapic
LABEL Linux64SMBManualNoLapic
MENU LABEL openSUSE 10.1 64 Bit Manuelle Installation ohne APIC
KERNEL openSUSE/10.1/64Bit/linux
APPEND initrd=openSUSE/10.1/64Bit/initrd splash=silent showopts nolapic insmod=e100 insmod=e1000 insmod=8139too insmod=forcedeth install=smb://192.168.2.1/Installserver/openSUSE/10.1/64Bit/
# 64Bit SMB failsafe
LABEL Linux64SMBfailsafe
MENU LABEL openSUSE 10.1 64 Bit Manuelle Installation Failsafe-Mode
KERNEL openSUSE/10.1/64Bit/linux
APPEND initrd=openSUSE/10.1/64Bit/initrd splash=silent showopts apm=off acpi=off mce=off barrier=off ide=nodma idewait=50 i8042.nomux psmouse.proto=bare irqpoll pci=nommconf insmod=e100 insmod=e1000 insmod=8139too insmod=forcedeth install=smb://192.168.2.1/Installserver/openSUSE/10.1/64Bit/
# 64Bit SMB rescue
LABEL Linux64SMBrescue
MENU LABEL openSUSE 10.1 64 Bit Rettungssystem
KERNEL openSUSE/10.1/64Bit/linux
APPEND initrd=openSUSE/10.1/64Bit/initrd splash=silent rescue=1 showopts insmod=e100 insmod=e1000 insmod=8139too insmod=forcedeth install=smb://192.168.2.1/Installserver/openSUSE/10.1/64Bit/
# 64Bit SMB autoyast
LABEL Linux64SMBautoyast
MENU LABEL openSUSE 10.1 64 Bit Installation per Autoyast
KERNEL openSUSE/10.1/64Bit/linux
APPEND initrd=openSUSE/10.1/64Bit/initrd splash=silent showopts insmod=e100 insmod=e1000 insmod=8139too insmod=forcedeth install=smb://192.168.2.1/Installserver/openSUSE/10.1/64Bit/
autoyast=smb://192.168.2.1/Installserver/openSUSE/10.1/autoyast/ay64http.xml
# 64Bit SMB remoteinstall
LABEL Linux64SMBPremote
MENU LABEL openSUSE 10.1 64 Bit Remoteinstallation mit VNC
KERNEL openSUSE/10.1/64Bit/linux
APPEND initrd=openSUSE/10.1/64Bit/initrd splash=silent showopts insmod=e100 insmod=e1000 insmod=8139too insmod=forcedeth vnc=1 vncpassword=opensuse install=smb://192.168.2.1/Installserver/openSUSE/10.1/64Bit/
# openSUSE
LABEL back
MENU LABEL openSUSE Auswahl
KERNEL menu.c32
APPEND openSUSE.conf
#Deutsche Tastaturbelegung
KBDMAP german.kbd
#Menüeinstellungen
MENU WIDTH 80
MENU MARGIN 10
MENU ROWS 12
MENU TABMSGROW 18
MENU CMDLINEROW 12
MENU ENDROW 24
MENU TIMEOUTROW 20
ONTIMEOUT back
TIMEOUT 200
#Hilfstexte
F1 S-Hilfe2.txt
F2 Hauptauswahl.txt
/tftpboot/OS32NFS.conf :
DEFAULT menu.c32
PROMPT 0
MENU TITLE openSUSE 10.1 32 Bit per NFS
# 32Bit NFS install
LABEL Linux32NFSManual
MENU LABEL openSUSE 10.1 32 Bit Manuelle Installation
KERNEL openSUSE/10.1/32Bit/linux
APPEND initrd=openSUSE/10.1/32Bit/initrd splash=silent showopts insmod=e100 insmod=e1000 insmod=8139too insmod=forcedeth install=nfs://192.168.2.1/Installserver/openSUSE/10.1/32Bit/
# 32Bit NFS install noacpi
LABEL Linux32NFSManualNoACPI
MENU LABEL openSUSE 10.1 32 Bit Manuelle Installation ohne ACPI
KERNEL openSUSE/10.1/32Bit/linux
APPEND initrd=openSUSE/10.1/32Bit/initrd splash=silent showopts acpi=off insmod=e100 insmod=e1000 insmod=8139too insmod=forcedeth install=nfs://192.168.2.1/Installserver/openSUSE/10.1/32Bit/
# 32Bit NFS install nolapic
LABEL Linux32NFSManualNoLapic
MENU LABEL openSUSE 10.1 32 Bit Manuelle Installation ohne APIC
KERNEL openSUSE/10.1/32Bit/linux
APPEND initrd=openSUSE/10.1/32Bit/initrd splash=silent showopts nolapic insmod=e100 insmod=e1000 insmod=8139too insmod=forcedeth install=nfs://192.168.2.1/Installserver/openSUSE/10.1/32Bit/
# 32Bit NFS failsafe
LABEL Linux32NFSfailsafe
MENU LABEL openSUSE 10.1 32 Bit Manuelle Installation Failsafe
KERNEL openSUSE/10.1/32Bit/linux
APPEND initrd=openSUSE/10.1/32Bit/initrd splash=silent showopts apm=off acpi=off mce=off barrier=off ide=nodma idewait=50 i8042.nomux psmouse.proto=bare irqpoll pci=nommconf insmod=e100 insmod=e1000 insmod=8139too insmod=forcedeth install=nfs://192.168.2.1/Installserver/openSUSE/10.1/32Bit/
# 32Bit NFS rescue
LABEL Linux32NFSrescue
MENU LABEL openSUSE 10.1 32 Bit Rettungssystem
KERNEL openSUSE/10.1/32Bit/linux
APPEND initrd=openSUSE/10.1/32Bit/initrd splash=silent rescue=1 showopts insmod=e100 insmod=e1000 insmod=8139too insmod=forcedeth install=nfs://192.168.2.1/Installserver/openSUSE/10.1/32Bit/
# 32Bit NFS autoyast
LABEL Linux32NFSautoyast
MENU LABEL openSUSE 10.1 32 Bit Installation per Autoyast
KERNEL openSUSE/10.1/32Bit/linux
APPEND initrd=openSUSE/10.1/32Bit/initrd splash=silent showopts insmod=e100 insmod=e1000 insmod=8139too insmod=forcedeth install=nfs://192.168.2.1/Installserver/openSUSE/10.1/32Bit/
autoyast=nfs://192.168.2.1/Installserver/openSUSE/10.1/autoyast/ay32nfs.xml
# 32Bit NFS remoteinstall
LABEL Linux32NFSremote
MENU LABEL openSUSE 10.1 32 Bit Remoteinstallation mit VNC
KERNEL openSUSE/10.1/32Bit/linux
APPEND initrd=openSUSE/10.1/32Bit/initrd splash=silent showopts insmod=e100 insmod=e1000 insmod=8139too insmod=forcedeth vnc=1 vncpassword=opensuse install=nfs://192.168.2.1/Installserver/openSUSE/10.1/32Bit/
# openSUSE
LABEL back
MENU LABEL openSUSE Auswahl
KERNEL menu.c32
APPEND openSUSE.conf
#Deutsche Tastaturbelegung
KBDMAP german.kbd
#Menüeinstellungen
MENU WIDTH 80
MENU MARGIN 10
MENU ROWS 12
MENU TABMSGROW 18
MENU CMDLINEROW 12
MENU ENDROW 24
MENU TIMEOUTROW 20
ONTIMEOUT back
TIMEOUT 200
#Hilfstexte
F1 S-Hilfe2.txt
F2 Hauptauswahl.txt
/tftpboot/OS32FTP.conf :
DEFAULT menu.c32
PROMPT 0
MENU TITLE openSUSE 10.1 32 Bit per FTP
# 32Bit FTP install
LABEL Linux32FTPManual
MENU LABEL openSUSE 10.1 32 Bit Manuelle Installation
KERNEL openSUSE/10.1/32Bit/linux
APPEND initrd=openSUSE/10.1/32Bit/initrd splash=silent showopts insmod=e100 insmod=e1000 insmod=8139too insmod=forcedeth install=ftp://192.168.2.1/Installserver/openSUSE/10.1/32Bit/
# 32Bit FTP install noacpi
LABEL Linux32FTPManualNoACPI
MENU LABEL openSUSE 10.1 32 Bit Manuelle Installation ohne ACPI
KERNEL openSUSE/10.1/32Bit/linux
APPEND initrd=openSUSE/10.1/32Bit/initrd splash=silent showopts acpi=off insmod=e100 insmod=e1000 insmod=8139too insmod=forcedeth install=ftp://192.168.2.1/Installserver/openSUSE/10.1/32Bit/
# 32Bit FTP install nolapic
LABEL Linux32FTPManualNoLapic
MENU LABEL openSUSE 10.1 32 Bit Manuelle Installation ohne APIC
KERNEL openSUSE/10.1/32Bit/linux
APPEND initrd=openSUSE/10.1/32Bit/initrd splash=silent showopts nolapic insmod=e100 insmod=e1000 insmod=8139too insmod=forcedeth install=ftp://192.168.2.1/Installserver/openSUSE/10.1/32Bit/
# 32Bit FTP failsafe
LABEL Linux32FTPfailsafe
MENU LABEL openSUSE 10.1 32 Bit Manuelle Installation Failsafe-Mode
KERNEL openSUSE/10.1/32Bit/linux
APPEND initrd=openSUSE/10.1/32Bit/initrd splash=silent showopts apm=off acpi=off mce=off barrier=off ide=nodma idewait=50 i8042.nomux psmouse.proto=bare irqpoll pci=nommconf insmod=e100 insmod=e1000 insmod=8139too insmod=forcedeth install=ftp://192.168.2.1/Installserver/openSUSE/10.1/32Bit/
# 32Bit FTP rescue
LABEL Linux32FTPrescue
MENU LABEL openSUSE 10.1 32 Bit Rettungssystem
KERNEL openSUSE/10.1/32Bit/linux
APPEND initrd=openSUSE/10.1/32Bit/initrd splash=silent rescue=1 showopts insmod=e100 insmod=e1000 insmod=8139too insmod=forcedeth install=ftp://192.168.2.1/Installserver/openSUSE/10.1/32Bit/
# 32Bit FTP autoyast
LABEL Linux32FTPautoyast
MENU LABEL openSUSE 10.1 32 Bit Installation per Autoyast
KERNEL openSUSE/10.1/32Bit/linux
APPEND initrd=openSUSE/10.1/32Bit/initrd splash=silent showopts insmod=e100 insmod=e1000 insmod=8139too insmod=forcedeth install=ftp://192.168.2.1/Installserver/openSUSE/10.1/32Bit/
autoyast=ftp://192.168.2.1/Installserver/openSUSE/10.1/autoyast/ay32ftp.xml
# 32Bit FTP remoteinstall
LABEL Linux32FTPremote
MENU LABEL openSUSE 10.1 32 Bit Remoteinstallation mit VNC
KERNEL openSUSE/10.1/32Bit/linux
APPEND initrd=openSUSE/10.1/32Bit/initrd splash=silent showopts insmod=e100 insmod=e1000 insmod=8139too insmod=forcedeth vnc=1 vncpassword=opensuse install=ftp://192.168.2.1/Installserver/openSUSE/10.1/32Bit/
# openSUSE
LABEL back
MENU LABEL openSUSE Auswahl
KERNEL menu.c32
APPEND openSUSE.conf
#Deutsche Tastaturbelegung
KBDMAP german.kbd
#Menüeinstellungen
MENU WIDTH 80
MENU MARGIN 10
MENU ROWS 12
MENU TABMSGROW 18
MENU CMDLINEROW 12
MENU ENDROW 24
MENU TIMEOUTROW 20
ONTIMEOUT back
TIMEOUT 200
#Hilfstexte
F1 S-Hilfe2.txt
F2 Hauptauswahl.txt
/tftpboot/OS32HTTP.conf :
DEFAULT menu.c32
PROMPT 0
MENU TITLE openSUSE 10.1 32 Bit per HTTP
# 32Bit HTTP install
LABEL Linux32HTTPManual
MENU LABEL openSUSE 10.1 32 Bit Manuelle Installation
KERNEL openSUSE/10.1/32Bit/linux
APPEND initrd=openSUSE/10.1/32Bit/initrd splash=silent showopts insmod=e100 insmod=e1000 insmod=8139too insmod=forcedeth install=http://192.168.2.1/Installserver/openSUSE/10.1/32Bit/
# 32Bit HTTP install noacpi
LABEL Linux32HTTPManualNoACPI
MENU LABEL openSUSE 10.1 32 Bit Manuelle Installation ohne ACPI
KERNEL openSUSE/10.1/32Bit/linux
APPEND initrd=openSUSE/10.1/32Bit/initrd splash=silent showopts acpi=off insmod=e100 insmod=e1000 insmod=8139too insmod=forcedeth install=http://192.168.2.1/Installserver/openSUSE/10.1/32Bit/
# 32Bit HTTP install nolapic
LABEL Linux32HTTPManualNoLapic
MENU LABEL openSUSE 10.1 32 Bit Manuelle Installation ohne APIC
KERNEL openSUSE/10.1/32Bit/linux
APPEND initrd=openSUSE/10.1/32Bit/initrd splash=silent showopts nolapic insmod=e100 insmod=e1000 insmod=8139too insmod=forcedeth install=http://192.168.2.1/Installserver/openSUSE/10.1/32Bit/
# 32Bit HTTP failsafe
LABEL Linux32HTTPfailsafe
MENU LABEL openSUSE 10.1 32 Bit Manuelle Installation Failsafe-Mode
KERNEL openSUSE/10.1/32Bit/linux
APPEND initrd=openSUSE/10.1/32Bit/initrd splash=silent showopts apm=off acpi=off mce=off barrier=off ide=nodma idewait=50 i8042.nomux psmouse.proto=bare irqpoll pci=nommconf insmod=e100 insmod=e1000 insmod=8139too insmod=forcedeth install=http://192.168.2.1/Installserver/openSUSE/10.1/32Bit/
# 32Bit HTTP rescue
LABEL Linux32HTTPrescue
MENU LABEL openSUSE 10.1 32 Bit Rettungssystem
KERNEL openSUSE/10.1/32Bit/linux
APPEND initrd=openSUSE/10.1/32Bit/initrd splash=silent rescue=1 showopts insmod=e100 insmod=e1000 insmod=8139too insmod=forcedeth install=http://192.168.2.1/Installserver/openSUSE/10.1/32Bit/
# 32Bit HTTP autoyast
LABEL Linux32HTTPautoyast
MENU LABEL openSUSE 10.1 32 Bit Installation per Autoyast
KERNEL openSUSE/10.1/32Bit/linux
APPEND initrd=openSUSE/10.1/32Bit/initrd splash=silent showopts insmod=e100 insmod=e1000 insmod=8139too insmod=forcedeth install=http://192.168.2.1/Installserver/openSUSE/10.1/32Bit/
autoyast=http://192.168.2.1/Installserver/openSUSE/10.1/autoyast/ay32http.xml
# 32Bit HTTP remoteinstall
LABEL Linux32HTTPremote
MENU LABEL openSUSE 10.1 32 Bit Remoteinstallation mit VNC
KERNEL openSUSE/10.1/32Bit/linux
APPEND initrd=openSUSE/10.1/32Bit/initrd splash=silent showopts insmod=e100 insmod=e1000 insmod=8139too insmod=forcedeth vnc=1 vncpassword=opensuse install=http://192.168.2.1/Installserver/openSUSE/10.1/32Bit/
# openSUSE
LABEL back
MENU LABEL openSUSE Auswahl
KERNEL menu.c32
APPEND openSUSE.conf
#Deutsche Tastaturbelegung
KBDMAP german.kbd
#Menüeinstellungen
MENU WIDTH 80
MENU MARGIN 10
MENU ROWS 12
MENU TABMSGROW 18
MENU CMDLINEROW 12
MENU ENDROW 24
MENU TIMEOUTROW 20
ONTIMEOUT back
TIMEOUT 200
#Hilfstexte
F1 S-Hilfe2.txt
F2 Hauptauswahl.txt
/tftpboot/OS32SMB.conf :
DEFAULT menu.c32
PROMPT 0
MENU TITLE openSUSE 10.1 32 Bit per SMB
# 32Bit SMB install
LABEL Linux32SMBManual
MENU LABEL openSUSE 10.1 32 Bit Manuelle Installation
KERNEL openSUSE/10.1/32Bit/linux
APPEND initrd=openSUSE/10.1/32Bit/initrd splash=silent showopts insmod=e100 insmod=e1000 insmod=8139too insmod=forcedeth install=smb://192.168.2.1/Installserver/openSUSE/10.1/32Bit/
# 32Bit SMB install noacpi
LABEL Linux32SMBManualNoACPI
MENU LABEL openSUSE 10.1 32 Bit Manuelle Installation ohne ACPI
KERNEL openSUSE/10.1/32Bit/linux
APPEND initrd=openSUSE/10.1/32Bit/initrd splash=silent showopts acpi=off insmod=e100 insmod=e1000 insmod=8139too insmod=forcedeth install=smb://192.168.2.1/Installserver/openSUSE/10.1/32Bit/
# 32Bit SMB install nolapic
LABEL Linux32SMBManualNoLapic
MENU LABEL openSUSE 10.1 32 Bit Manuelle Installation ohne APIC
KERNEL openSUSE/10.1/32Bit/linux
APPEND initrd=openSUSE/10.1/32Bit/initrd splash=silent showopts nolapic insmod=e100 insmod=e1000 insmod=8139too insmod=forcedeth install=smb://192.168.2.1/Installserver/openSUSE/10.1/32Bit/
# 32Bit SMB failsafe
LABEL Linux32SMBfailsafe
MENU LABEL openSUSE 10.1 32 Bit Manuelle Installation Failsafe-Mode
KERNEL openSUSE/10.1/32Bit/linux
APPEND initrd=openSUSE/10.1/32Bit/initrd splash=silent showopts apm=off acpi=off mce=off barrier=off ide=nodma idewait=50 i8042.nomux psmouse.proto=bare irqpoll pci=nommconf insmod=e100 insmod=e1000 insmod=8139too insmod=forcedeth install=smb://192.168.2.1/Installserver/openSUSE/10.1/32Bit/
# 32Bit SMB rescue
LABEL Linux32SMBrescue
MENU LABEL openSUSE 10.1 32 Bit Rettungssystem
KERNEL openSUSE/10.1/32Bit/linux
APPEND initrd=openSUSE/10.1/32Bit/initrd splash=silent rescue=1 showopts insmod=e100 insmod=e1000 insmod=8139too insmod=forcedeth install=smb://192.168.2.1/Installserver/openSUSE/10.1/32Bit/
# 32Bit SMB autoyast
LABEL Linux32SMBautoyast
MENU LABEL openSUSE 10.1 32 Bit Installation per Autoyast
KERNEL openSUSE/10.1/32Bit/linux
APPEND initrd=openSUSE/10.1/32Bit/initrd splash=silent showopts insmod=e100 insmod=e1000 insmod=8139too insmod=forcedeth install=smb://192.168.2.1/Installserver/openSUSE/10.1/32Bit/
autoyast=smb://192.168.2.1/Installserver/openSUSE/10.1/autoyast/a-y32smb.xml
# 32Bit SMB remoteinstall
LABEL Linux32SMBremote
MENU LABEL openSUSE 10.1 32 Bit Remoteinstallation mit VNC
KERNEL openSUSE/10.1/32Bit/linux
APPEND initrd=openSUSE/10.1/32Bit/initrd splash=silent showopts insmod=e100 insmod=e1000 insmod=8139too insmod=forcedeth vnc=1 vncpassword=opensuse install=smb://192.168.2.1/Installserver/openSUSE/10.1/32Bit/
# openSUSE
LABEL back
MENU LABEL openSUSE Auswahl
KERNEL menu.c32
APPEND openSUSE.conf
#Deutsche Tastaturbelegung
KBDMAP german.kbd
#Menüeinstellungen
MENU WIDTH 80
MENU MARGIN 10
MENU ROWS 12
MENU TABMSGROW 18
MENU CMDLINEROW 12
MENU ENDROW 24
MENU TIMEOUTROW 20
ONTIMEOUT back
TIMEOUT 200
#Hilfstexte
F1 S-Hilfe2.txt
F2 Hauptauswahl.txt
--TomcatMJ 04:06, 12. Sep 2006 (CEST)
