Grafikkarten und Monitore Fedora Core: Unterschied zwischen den Versionen
K (→NVIDIA) |
(→Fedora Core 6) |
||
| Zeile 5: | Zeile 5: | ||
===Fedora Core 5=== | ===Fedora Core 5=== | ||
===Fedora Core 6=== | ===Fedora Core 6=== | ||
| + | |||
| + | Root werden: | ||
| + | <nowiki>su -</nowiki> | ||
| + | |||
| + | Treiber von [[Livna|Livna.org]] installieren: | ||
| + | <nowiki>yum install kmod-fglrx</nowiki> | ||
| + | |||
| + | X-Server beenden: | ||
| + | <nowiki>init 3</nowiki> | ||
| + | |||
| + | Als Root anmelden und dann den Treiber aktivieren: | ||
| + | <nowiki>ati-fglrx-config-display enable</nowiki> | ||
| + | |||
| + | Treiber konfigurieren (Singlehead): | ||
| + | <nowiki>aticonfig --initial</nowiki> | ||
| + | |||
| + | X-Server starten: | ||
| + | <nowiki>init 5</nowiki> | ||
| + | |||
| + | /etc/xorg.conf editieren: | ||
| + | * Section "Modules", "DRI" und "Extensions" ergänzen (am Besten dazu mit der Musterkonfiguration vergleichen) | ||
| + | |||
| + | <nowiki> | ||
| + | # Modified xorg.conf -- 2006-12-02 | ||
| + | |||
| + | Section "ServerLayout" | ||
| + | Identifier "single head configuration" | ||
| + | Screen 0 "aticonfig-Screen[0]" 0 0 | ||
| + | InputDevice "Keyboard0" "CoreKeyboard" | ||
| + | EndSection | ||
| + | |||
| + | Section "Files" | ||
| + | EndSection | ||
| + | |||
| + | Section "Module" | ||
| + | Load "glx" | ||
| + | Load "freetype" | ||
| + | Load "dri" | ||
| + | EndSection | ||
| + | |||
| + | Section "InputDevice" | ||
| + | Identifier "Keyboard0" | ||
| + | Driver "kbd" | ||
| + | Option "XkbModel" "pc105" | ||
| + | Option "XkbLayout" "de" | ||
| + | EndSection | ||
| + | |||
| + | Section "Monitor" | ||
| + | Identifier "Monitor0" | ||
| + | ModelName "Samsung SyncMaster 959NF" | ||
| + | HorizSync 31.5 - 110.0 | ||
| + | VertRefresh 50.0 - 160.0 | ||
| + | Option "dpms" | ||
| + | EndSection | ||
| + | |||
| + | Section "Monitor" | ||
| + | Identifier "aticonfig-Monitor[0]" | ||
| + | Option "VendorName" "ATI Proprietary Driver" | ||
| + | Option "ModelName" "Generic Autodetecting Monitor" | ||
| + | Option "DPMS" "true" | ||
| + | EndSection | ||
| + | |||
| + | Section "Device" | ||
| + | Identifier "Videocard0" | ||
| + | Driver "radeon" | ||
| + | Option "VideoOverlay" "on" | ||
| + | EndSection | ||
| + | |||
| + | Section "Device" | ||
| + | Identifier "aticonfig-Device[0]" | ||
| + | Driver "fglrx" | ||
| + | Option "VideoOverlay" "on" | ||
| + | EndSection | ||
| + | |||
| + | Section "Screen" | ||
| + | Identifier "Screen0" | ||
| + | Device "Videocard0" | ||
| + | Monitor "Monitor0" | ||
| + | DefaultDepth 24 | ||
| + | SubSection "Display" | ||
| + | Viewport 0 0 | ||
| + | Depth 24 | ||
| + | Modes "1280x1024" "1024x768" "800x600" "640x480" | ||
| + | EndSubSection | ||
| + | EndSection | ||
| + | |||
| + | Section "Screen" | ||
| + | Identifier "aticonfig-Screen[0]" | ||
| + | Device "aticonfig-Device[0]" | ||
| + | Monitor "aticonfig-Monitor[0]" | ||
| + | DefaultDepth 24 | ||
| + | SubSection "Display" | ||
| + | Viewport 0 0 | ||
| + | Depth 24 | ||
| + | Modes "1280x1024" "1024x768" "800x600" "640x480" | ||
| + | EndSubSection | ||
| + | EndSection | ||
| + | |||
| + | Section "DRI" | ||
| + | Group 0 | ||
| + | Mode 0666 | ||
| + | EndSection | ||
| + | |||
| + | Section "Extensions" | ||
| + | Option "Composite" "Disable" | ||
| + | EndSection | ||
| + | </nowiki> | ||
| + | |||
| + | Nach den Änderungen empfielt sich ein Neustart des Systems. Danach müsste der Treiber und die 3D-Unterstützung funktionieren. | ||
==NVIDIA-Treiber Installation== | ==NVIDIA-Treiber Installation== | ||
Version vom 9. Dezember 2006, 12:00 Uhr
Inhaltsverzeichnis
ATI-Treiber Installation
Fedora Core 3
Fedora Core 4
Fedora Core 5
Fedora Core 6
Root werden:
su -
Treiber von Livna.org installieren:
yum install kmod-fglrx
X-Server beenden:
init 3
Als Root anmelden und dann den Treiber aktivieren:
ati-fglrx-config-display enable
Treiber konfigurieren (Singlehead):
aticonfig --initial
X-Server starten:
init 5
/etc/xorg.conf editieren:
- Section "Modules", "DRI" und "Extensions" ergänzen (am Besten dazu mit der Musterkonfiguration vergleichen)
# Modified xorg.conf -- 2006-12-02
Section "ServerLayout"
Identifier "single head configuration"
Screen 0 "aticonfig-Screen[0]" 0 0
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "Files"
EndSection
Section "Module"
Load "glx"
Load "freetype"
Load "dri"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
Option "XkbModel" "pc105"
Option "XkbLayout" "de"
EndSection
Section "Monitor"
Identifier "Monitor0"
ModelName "Samsung SyncMaster 959NF"
HorizSync 31.5 - 110.0
VertRefresh 50.0 - 160.0
Option "dpms"
EndSection
Section "Monitor"
Identifier "aticonfig-Monitor[0]"
Option "VendorName" "ATI Proprietary Driver"
Option "ModelName" "Generic Autodetecting Monitor"
Option "DPMS" "true"
EndSection
Section "Device"
Identifier "Videocard0"
Driver "radeon"
Option "VideoOverlay" "on"
EndSection
Section "Device"
Identifier "aticonfig-Device[0]"
Driver "fglrx"
Option "VideoOverlay" "on"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Videocard0"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 24
Modes "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
EndSection
Section "Screen"
Identifier "aticonfig-Screen[0]"
Device "aticonfig-Device[0]"
Monitor "aticonfig-Monitor[0]"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 24
Modes "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
EndSection
Section "DRI"
Group 0
Mode 0666
EndSection
Section "Extensions"
Option "Composite" "Disable"
EndSection
Nach den Änderungen empfielt sich ein Neustart des Systems. Danach müsste der Treiber und die 3D-Unterstützung funktionieren.
