Xorg Konfigurationsdatei Bigdesktop mit Xorg und BerylXgl: Unterschied zwischen den Versionen
K (→Verwendete Hardware: (kleiner Zusatz)) |
K (→Verwendete Hardware: (kleines update)) |
||
Zeile 34: | Zeile 34: | ||
# Logitech Access Keyboard (german Layout) and Logitech MX510 Mouse | # Logitech Access Keyboard (german Layout) and Logitech MX510 Mouse | ||
# see comments for BusID; etc. | # see comments for BusID; etc. | ||
+ | |||
+ | # Original and import of sax2: | ||
+ | Section "ServerLayout" | ||
+ | Identifier "aticonfig-Layout[all]" | ||
+ | InputDevice "Keyboard[0]" "CoreKeyboard" | ||
+ | InputDevice "Mouse[1]" "CorePointer" | ||
+ | Screen 0 "aticonfig-Screen[0]" 0 0 | ||
+ | Option "Clone" "off" # from Sax2 and Bigdesktop is set ;) | ||
+ | Option "Xinerama" "off" # using "in driver Xinerama Extension" | ||
+ | EndSection | ||
# Original: | # Original: | ||
Zeile 70: | Zeile 80: | ||
InputDevices "/dev/gpmdata" | InputDevices "/dev/gpmdata" | ||
InputDevices "/dev/input/mice" | InputDevices "/dev/input/mice" | ||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
EndSection | EndSection | ||
Zeile 89: | Zeile 92: | ||
Load "dri" | Load "dri" | ||
EndSection | EndSection | ||
+ | |||
+ | # Sax2 import and additional: | ||
+ | Section "ServerFlags" | ||
+ | Option "AIGLX" "off" # due to lack of support | ||
+ | Option "AllowMouseOpenFail" "on" | ||
+ | Option "IgnoreABI" "on" | ||
+ | EndSection | ||
+ | |||
# Sax2 import: | # Sax2 import: | ||
Zeile 112: | Zeile 123: | ||
Option "ZAxisMapping" "4 5" | Option "ZAxisMapping" "4 5" | ||
EndSection | EndSection | ||
+ | |||
+ | # Sax2 import: | ||
+ | #Section "Modes" | ||
+ | # Identifier "Modes[0]" | ||
+ | # Modeline "1280x1024" 157.5 1280 1344 1504 1728 1024 1025 1028 1072 +hsync +vsync | ||
+ | #EndSection | ||
+ | |||
# aticonfig import: | # aticonfig import: | ||
Section "Monitor" | Section "Monitor" | ||
Identifier "aticonfig-Monitor[0]" | Identifier "aticonfig-Monitor[0]" | ||
− | HorizSync | + | HorizSync 30.0 - 96.0 # Hsynch first Monitor |
− | VertRefresh 50.0 - | + | VertRefresh 50.0 - 150.0 # Vsynch first Monitor |
DisplaySize 350 260 # special for my screens | DisplaySize 350 260 # special for my screens | ||
Option "VendorName" "ATI Proprietary Driver" | Option "VendorName" "ATI Proprietary Driver" | ||
Option "ModelName" "Generic Autodetecting Monitor" | Option "ModelName" "Generic Autodetecting Monitor" | ||
Option "DPMS" "true" | Option "DPMS" "true" | ||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
EndSection | EndSection | ||
Zeile 151: | Zeile 150: | ||
Option "CenterMode" "off" | Option "CenterMode" "off" | ||
Option "mtrr" "off" # Unused with PCI-E card? | Option "mtrr" "off" # Unused with PCI-E card? | ||
− | Option | + | Option "HSync2" "30-96" # Hsync Monitor 2 |
− | Option | + | Option "VRefresh2" "50-150" # Vsync Monitor 2 |
Option "OverlayOnCRTC2" "1" # Overlay | Option "OverlayOnCRTC2" "1" # Overlay | ||
Option "DesktopSetup" "Horizontal,Reverse" # Desktopsetup (reverse) | Option "DesktopSetup" "Horizontal,Reverse" # Desktopsetup (reverse) | ||
Option "ForceMonitors" "auto,crt1" # CRT Screens | Option "ForceMonitors" "auto,crt1" # CRT Screens | ||
Option "Mode2" "1024x768,1024x600,800x600,640x480" # Modes Monitor 2 | Option "Mode2" "1024x768,1024x600,800x600,640x480" # Modes Monitor 2 | ||
+ | Option "PairModes" "800x600+800x600,1024x768+1024x768,1024x768+800x600" | ||
Option "GammaCorrectionI" "0x06419064" | Option "GammaCorrectionI" "0x06419064" | ||
Option "GammaCorrectionII" "0x06419064" | Option "GammaCorrectionII" "0x06419064" | ||
− | Option "ForceGenericCPU" "no" | + | Option "ForceGenericCPU" "no" # set to "yes" if cpu detected uncorrectly |
Option "UseFastTLS" "0" # for wine; etc. | Option "UseFastTLS" "0" # for wine; etc. | ||
Option "BlockSignalsOnLock" "on" | Option "BlockSignalsOnLock" "on" | ||
Zeile 184: | Zeile 184: | ||
EndSection | EndSection | ||
− | # | + | # aticonfig import: |
− | Section " | + | Section "Screen" |
− | Identifier "aticonfig- | + | Identifier "aticonfig-Screen[0]" |
− | + | Device "aticonfig-Device[0]" | |
− | + | Monitor "aticonfig-Monitor[0]" | |
− | + | DefaultDepth 24 | |
− | + | SubSection "Display" | |
− | + | Viewport 0 0 | |
+ | Depth 24 | ||
+ | Modes "1024x768" "800x600" "640x480" # resolutions | ||
+ | EndSubSection | ||
EndSection | EndSection | ||
Version vom 18. Mai 2007, 14:26 Uhr
Verwendete Hardware
Hier ein kurzer Überblick über die wichtigsten Eckdaten:
Eine xorg.conf für fglrx 8.35.5 mit SUSE 10.2 und "2.6.18.8-0.1-default i386 GNU/Linux"
- ATI Bigdesktopmodus für Xgl/Xorg ohne das die Config geändert werden muss
- AIGLX wird vom Treiber noch nicht unterstützt
Beide Geräte mit folgenden Einstellungen:
- HorizSync 31.0 - 91.0
- VertRefresh 50.0 - 85.0
- zwei 19" Röhrenmonitore
- Auflösung für den Xserver 1024x768@85 Hz
- Unterstützte Auflösungen: "1024x768,1024x600,800x600,640x480"
Eingabegeräte (Tastatur/Maus) sind in diesem Fall:
- Logitech Access Keyboard (deutsches Tastenlayout)
- Logitech MX 510 Maus
Grafikkarte:
- ASUS EAX 1950 XTX PCI-E;
Verwendeter Sysconfigwert bei Beryl-Xgl (/etc/syconfig/displaymanager):
- DISPLAYMANAGER_XGL_OPTS="-lines -accel glx:pbuffer -accel xv:pbuffer -xorgAc +xinerama"
# /.../ # modified X11 config file # (please do not use or modify this file without knowing what it does!) # for fglrx 8.35.5 Bigdestkopsetup Xgl and Xorg # used Board X1950 XTX; With openSUSE 10.2 # configured for two equal CRT screens; each with 1024x768 @ 85 Hz # HorizSync "31.0 - 91.0" VertRefresh "50.0 - 85.0" (both same; refer to monitor manual) # Xgl: DISPLAYMANAGER_XGL_OPTS="-lines -accel glx:pbuffer -accel xv:pbuffer -xorgAc +xinerama" # Logitech Access Keyboard (german Layout) and Logitech MX510 Mouse # see comments for BusID; etc. # Original and import of sax2: Section "ServerLayout" Identifier "aticonfig-Layout[all]" InputDevice "Keyboard[0]" "CoreKeyboard" InputDevice "Mouse[1]" "CorePointer" Screen 0 "aticonfig-Screen[0]" 0 0 Option "Clone" "off" # from Sax2 and Bigdesktop is set ;) Option "Xinerama" "off" # using "in driver Xinerama Extension" EndSection # Original: Section "Files" FontPath "/usr/share/fonts/misc:unscaled" FontPath "/usr/share/fonts/local" FontPath "/usr/share/fonts/75dpi:unscaled" FontPath "/usr/share/fonts/100dpi:unscaled" FontPath "/usr/share/fonts/Type1" FontPath "/usr/share/fonts/URW" FontPath "/usr/share/fonts/Speedo" FontPath "/usr/share/fonts/PEX" FontPath "/usr/share/fonts/cyrillic" FontPath "/usr/share/fonts/latin2/misc:unscaled" FontPath "/usr/share/fonts/latin2/75dpi:unscaled" # All fontpaths may be used depends on FontPath "/usr/share/fonts/latin2/100dpi:unscaled" # installation and installed fonts FontPath "/usr/share/fonts/latin2/Type1" # etc. FontPath "/usr/share/fonts/latin7/75dpi:unscaled" FontPath "/usr/share/fonts/baekmuk:unscaled" FontPath "/usr/share/fonts/japanese:unscaled" FontPath "/usr/share/fonts/kwintv" FontPath "/usr/share/fonts/truetype" FontPath "/usr/share/fonts/uni:unscaled" FontPath "/usr/share/fonts/CID" FontPath "/usr/share/fonts/ucs/misc:unscaled" FontPath "/usr/share/fonts/ucs/75dpi:unscaled" FontPath "/usr/share/fonts/ucs/100dpi:unscaled" FontPath "/usr/share/fonts/hellas/misc:unscaled" FontPath "/usr/share/fonts/hellas/75dpi:unscaled" FontPath "/usr/share/fonts/hellas/100dpi:unscaled" FontPath "/usr/share/fonts/hellas/Type1" FontPath "/usr/share/fonts/misc/sgi:unscaled" FontPath "/usr/share/fonts/xtest" FontPath "/opt/kde3/share/fonts" FontPath "unix/:7100" InputDevices "/dev/gpmdata" InputDevices "/dev/input/mice" EndSection # Sax2 import: Section "Module" # necessary modules Load "dbe" Load "type1" Load "freetype" Load "extmod" Load "glx" Load "v4l" Load "dri" EndSection # Sax2 import and additional: Section "ServerFlags" Option "AIGLX" "off" # due to lack of support Option "AllowMouseOpenFail" "on" Option "IgnoreABI" "on" EndSection # Sax2 import: Section "InputDevice" # Logitech Acess Keyboard Driver "kbd" # german Keyboard layout Identifier "Keyboard[0]" Option "Protocol" "Standard" Option "XkbLayout" "de" Option "XkbModel" "logiaccess" Option "XkbRules" "xfree86" Option "XkbVariant" "nodeadkeys" EndSection # Sax2 import: Section "InputDevice" Driver "mouse" # Logitech MX 510 Identifier "Mouse[1]" # no special settings Option "Buttons" "10" Option "Device" "/dev/input/mice" Option "Name" "Logitech USB-PS/2 Optical Mouse" Option "Protocol" "explorerps/2" Option "Vendor" "Sysp" Option "ZAxisMapping" "4 5" EndSection # Sax2 import: #Section "Modes" # Identifier "Modes[0]" # Modeline "1280x1024" 157.5 1280 1344 1504 1728 1024 1025 1028 1072 +hsync +vsync #EndSection # aticonfig import: Section "Monitor" Identifier "aticonfig-Monitor[0]" HorizSync 30.0 - 96.0 # Hsynch first Monitor VertRefresh 50.0 - 150.0 # Vsynch first Monitor DisplaySize 350 260 # special for my screens Option "VendorName" "ATI Proprietary Driver" Option "ModelName" "Generic Autodetecting Monitor" Option "DPMS" "true" EndSection # aticonfig import and additional (modified): Section "Device" BoardName "ASUS EAX 1950 XTX" # ;) BusID "" # your BUS ID FOR ADAPTER #example: BusID "1:0:0" Driver "fglrx" Identifier "aticonfig-Device[0]" Option "CenterMode" "off" Option "mtrr" "off" # Unused with PCI-E card? Option "HSync2" "30-96" # Hsync Monitor 2 Option "VRefresh2" "50-150" # Vsync Monitor 2 Option "OverlayOnCRTC2" "1" # Overlay Option "DesktopSetup" "Horizontal,Reverse" # Desktopsetup (reverse) Option "ForceMonitors" "auto,crt1" # CRT Screens Option "Mode2" "1024x768,1024x600,800x600,640x480" # Modes Monitor 2 Option "PairModes" "800x600+800x600,1024x768+1024x768,1024x768+800x600" Option "GammaCorrectionI" "0x06419064" Option "GammaCorrectionII" "0x06419064" Option "ForceGenericCPU" "no" # set to "yes" if cpu detected uncorrectly Option "UseFastTLS" "0" # for wine; etc. Option "BlockSignalsOnLock" "on" Option "FSAAEnable" "on" Option "Capabilities" "0x00000800" Option "FSAAScale" "0" Option "FSAADisableGamma" "on" Option "VideoOverlay" "on" # There Can Be Only One ;) Option "OpenGLOverlay" "off" # There Can Be Only One ;) Option "ForceGenericCPU" "no" Option "XAANoOffscreenPixmaps" "true" # for "xine" Option "KernelModuleParm" "locked-userpages=0" Option "UseInternalAGPGART" "no" # for AGP cards ? # Option "MaxGARTSize" "256" # (useless f. PCI-E) tuned GART Size (AGP?) Option "Stereo" "off" # unused in my case Option "no_dri" "no" Option "no_accel" "no" Option "CenterMode" "off" Option "ScreenOverlap" "0" Option "PseudoColorVisuals" "off" Option "StereoSyncEnable" "0" # prevent tearing effect Option "EnablePrivateBackZ" "no" # Z buffer? # Option "backingstore" "true" # <- resolves redraw prob EndSection # aticonfig import: Section "Screen" Identifier "aticonfig-Screen[0]" Device "aticonfig-Device[0]" Monitor "aticonfig-Monitor[0]" DefaultDepth 24 SubSection "Display" Viewport 0 0 Depth 24 Modes "1024x768" "800x600" "640x480" # resolutions EndSubSection EndSection # SaX2 import (modified): Section "DRI" Group "video" Mode 0666 EndSection # Sax2 import (additional): Section "Extensions" Option "DAMAGE" "false" Option "Composite" "false" # Xgl has its own extension EndSection
Problem, dass beim Scrollen, verschieben von Icons und im Kmenü Darstellungsfehler auftreten? siehe: Hilfe Darstellungsproblem KDE